Table 11-6 Assembly/Class Fields
Field | Description |
---|---|
Description |
Enter a description for the payment driver (for example, CAPMS Payment Driver). |
Display Name |
Enter the name of the third-party driver development company. This value appears in the Driver drop-down list. |
Driver ID |
Enter CAPMS. |
Bank Identification Number
Batch Number
Merchant Number
Store Number
Terminal Number
The values in these fields cannot be 0 (zero) or blank.
Table 11-7 Transport Service Properties Fields
Field | Description |
---|---|
Batching Host |
Enter the IP address of the machine where the vendor gateway application is installed at the Hosting or Enterprise level. Refer to the third-party driver development company for the appropriate value. |
Batching Host Port |
Refer to the third-party driver development company for the appropriate value. |
Host Timeout |
Enter the timeout value in seconds. Setting the value to 0 (zero) equals no timeout. Do not leave this field blank. |
Table 11-8 CAPMS Driver Properties Fields
Field | Description |
---|---|
Enable RFID |
Select False. |
Enable Shift4 Messaging |
Select True. |
Enable Tokenization |
Select True to use tokenized messaging. Select False to use standard non-tokenized messages. This setting is based on the vendor configuration. |
Interface Name |
Refer to the third-party driver development company for the appropriate value. |
Message Version |
Refer to the third-party driver development company for the appropriate value. |
Non-Tokenized Authorization Reversal Method |
If you set Enable Tokenization to False, select one of the following standard messaging options:
|
Send Issue Number |
Select False. |
Send Start Date |
Select False. |