Table 11-14 Assembly/Class Fields
Field | Description |
---|---|
Description |
Enter a description for the payment driver (for example, Fusebox Payment Driver). |
Display Name |
Enter the name of the third-party driver development company (for example, Elavon). This value appears in the Driver drop-down list. |
Driver ID |
Enter FB. |
Bank Identification Number
Batch Number
Merchant Number
Store Number
Terminal Number
The values in these fields cannot be 0 (zero) or blank.
Table 11-15 Transport Service Properties Fields
Field | Description |
---|---|
Batching Host |
If you are using the Fusebox solution, enter the IP address of the machine where the stunnel application is installed. If you are using ProtoBase, enter the IP address of the ProtoBase Hosted Solution provided by the Elavon representative for settlement transactions. |
Batching Host Port |
Enter 10001 for Fusebox. Contact the Elavon representative for the ProtoBase Hosted Solution port number for settlement transactions. |
Host Timeout |
Enter the timeout value in seconds. Setting the value to 0 (zero) equals no timeout. Do not leave this field blank. |
Primary Host |
Enter the IP address of the machine that runs the stunnel application.
|
Primary Host Port |
Enter 10001 for Fusebox. Contact the Elavon representative for the ProtoBase Hosted Solution port number for authorizations. |
Table 11-16 Elavon Driver Properties Fields
Field | Description |
---|---|
Chain Code |
Enter the six-character alphanumeric code assigned by Elavon, which is used for key management in gateway environments. The Chain Code is used with Fusebox, but not with ProtoBase. |
LocationName |
If Elavon supplied a Location Name or Source IP Adress to pass from the POS client, enter it here. This value passes on every transaction and can be the location name or Fusebox workstation. You can leave this field blank. The LocationName is used with Fusebox, but not with ProtoBase. |
TerminationID |
Enter the terminal code assigned by Elavon for the property to use with credit cards. |
TransactionInquiryRetryDelayTimeoutMS |
Enter the amount of time Simphony waits before sending the request when a failure occurs. After a communication failure with Fusebox, Simphony sends an inquiry to Fusebox to discover the cause of failure. Oracle recommends entering 5000. |
Related Topics
Parent topic: Payments and Currency