E4606 Cmd Rej: Point code type mismatch

For the chg-loopset command, when adding point codes using the apcl parameter, or changing individual point codes using the pc1/npc1 or pc1/npc2 parameters, the new point code type must match the point code type of the loopset entry to which these point codes are being added or changed.

For the ent/dlt/rtrv-pct commands, the values specified for the epc/epca/epci/epcn, filtpc/filtpca/filtpci/filtpcn, and realpc/realpca/realpci/realpcn parameters must have the same domain.

Recovery - chg-loopset

1. Display the existing point code types. Enter the rtrv-loopset command.
2. Re-enter the chg-loopset command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide and to Database Administration - GTT User's Guide for assistance.

   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).

Recovery - ent/chg/dlt-pct

1. If applicable, display the existing point code domains. Enter the rtrv-pct command.
2. Re-enter the ent/dlt/rtrv-pct command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide and to Database Administration - SS7 User's Guide for assistance.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).