E3571 Cmd Rej: GTA/SADDR Length does not match GTT Set number of digits

The length of the specified gta/saddr parameter must match the number of digits provisioned for the specified GTT set when the VGTT feature is turned off. If the VGTT feature is turned on, then up to 10 GTA/SADDR lengths can exist per GTT set. If the Support for 16 GTT Lengths in VGTT feature is turned on, then up to 16 GTA/SADDR lengths can exist per GTT set.

Note:

Once a feature that is controlled with a feature bit has been turned on, it cannot be turned off.

Recovery

1. Display the number of digits allocated for the GTT set. Enter the rtrv-gttset command.
   The number of digits is listed in the NDGT column of the output.
2. Display the status of the VGTT and Support for for 16 GTT Lengths in VGTT features. Enter the rtrv-feat and rtrv-ctrl-feat command, respectively.
   For the rtrv-ctrl-feat command, if the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
3. Turn on the VGTT and Support for for 16 GTT Lengths in VGTT features if desired. Refer to the Database Administration - GTT User's Guide for assistance.
4. Re-enter the command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide for assistance.