E2165 Cmd Rej: Removable drive not inserted

For the disp-disk-dir command, a removable drive must be inserted in the location indicated by the loc or src parameter.

For the format-disk command, the force=yes parameter must be specified if the drive to be formatted is recognized as a system removable drive. Only drives that have a dms.cfg file are recognized as system removable drives. A removable drive must be inserted and provisioned before the type=meas or type=system parameter can be specified.

Caution:

Contact My Oracle Support before entering the format-disk command.

For the tst-disk command, the removable media must be inserted in the corresponding USB port before loc=1113/1115:disk=remove/usb can be specified.

Recovery

1. Go to the E5-MASP assembly and visually verify whether there is a removable drive in the USB port.
   Refer to Database Administration - System Management User's Guide for assistance.
2. If a removable drive is in the USB port, remove and then insert the removable drive.
3. If no removable drive is in the USB port, insert a removable drive in the USB port.
4. Reseat the E5-MASP.
5. Re-enter the command that generated this error message. Refer to the command description in Commands User's Guide for assistance.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).