E2166 Cmd Rej: Partial point codes are not allowed

If the Cluster Routing and Management Diversity (CRMD) feature is turned on, then a full point code must be entered. Table 2-2 describes the recovery procedures by command.

Table 2-2 Recovery Procedures for Error Message E2166

Command	Recovery
chg-sid	Enter the rtrv-sid command to verify the site point code and capability point code. Enter rtrv-dstn to display the destination point codes in the database. Enter rtrv-ls to display the adjacent point codes in the database. Re-enter the command, specifying full point codes. Ensure the point code does not match any values not being changed by the chg-sid command and does not match any destination point codes or adjacent point codes.
ent/chg-appl-rtkey	Enter the rtrv-dstn command to display the destination point codes in the database. Re-enter the command specifying full point codes.
ent/dlt-rmt-appl	Enter the rtrv-rmt-appl command to verify the format of the point codes in the table Re-enter the command specifying a full point code in the correct format.