0565 - ATINPQ Subsystem is Not Available

The ATINP subsystem is not available. There are no IS-NR SCCP cards associated with this ATINP subsystem. The ATINP subsystem was not taken off-line via command.

Example

RLGHNCXA21W 00-02-07 12:01:43 EST  EAGLE 39.2.0
*C  0056.0565 *C ATINP SYSTEM           ATINPQ Subsystem is not available

Alarm Level: Critical

Recovery

1. Enter the following command to verify the status and location of the subsystem cards:
   rept-stat-mps
2. Enter the following command to move the SCCP cards to an ACTIVE status if loading is successful:
   rst-card:loc=xxxx

   where xxxx is the location of the OOS-MT-DSBLD SCCP card(s) identified in 1.

3. Enter the following command to verify the status and location of the subsystem cards:
   rept-stat-mps
4. Verify the SCCP card(s) reset in 2 are IS-NR.
   If not, reseat the card(s).
5. If any card(s) remain OOS-MT, replace the card(s).
   Refer to the Maintenance Manual for card removal/replacement procedures.