Go to primary content
Oracle® Communications EAGLE Unsolicited Alarm and Information Messages Reference
Release 46.8
F11887 Revision 1
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

1341 - SRI rcvd - GSM2IS41 not provisioned

The system received an SRI Query message for which it attempted to generate a response. However, IS41 GSM Migration(IGM) feature found the GSM to IS-41 Migration prefix (specified by the GSM2IS41 parameter) is not provisioned on this system. With this UIM, IGM is notifying the operator it cannot process the SRI messages and is allowing it to fall through to the GTT for handling.

To be able to perform the IS-41GSM Migration feature and to accept SRI Request messages, you must first specify the GSM2IS41 prefix in GSMOPTS.

Example

This output indicates an error against the original destination rather than the redirected destination.
RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0018.1341    CARD 1103,A     INFO    SRI rcvd - GSM2IS41not provisioned
           SIO=03   OPC=001-001-001      DPC=002-002-002
              SCCP MSG TYPE=04
              CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                     PC=003-003-003       SSN=005
              CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                     PC=001-001-001       SSN=004
              LSN=ABCD123  GTTSET=3 203 46
              Report Date:02-07-21  Time:16:20:19
This alternate output includes the redirected destination and is used when a redirected MSU encounters an error.
RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0018.1341    CARD 1103,A     INFO    SRI rcvd - GSM2IS41not provisioned
           SIO=03   OPC=001-001-001      DPC=002-002-002
              SCCP MSG TYPE=04
                GTT on CdPA used MOSMSGTA=9193802053
              CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                     PC=003-003-003       SSN=005
              CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                     PC=001-001-001       SSN=004
              LSN=ABCD123  GTTSET=3 203 46
              Report Date:02-07-21  Time:16:20:19
Legend
ADD
Address
CDPA
Called party address
CGPA
Calling party address
GTI
Global title indicator
GTTSET
GTT Set Index
LSN
Linkset name
NAI
Nature of address indicator
NI
Network indicator value
NP
Numbering plan
PC
Point code
PCI
Point code indicator
RI
Routing indicator
SSN
Subsystem number
SSNI
Subsystem number indicator
TT
Translation type
TRANSLATED PC
Translated point code
TRANSLATED SS
Translated subsystem

Note:

If Global Title Translation is found, the GTTSET in which the translation is found appears. If Global Title Translation is not found, the GTTSET does not display.

Alarm Level: No alarm condition. The message is informational only.

Recovery

  1. Enter the rtrv-gsmopts command to display the GSM2IS41 setting in the GSM System Options.

    Example of the output:

    rlghncxa03w 03-05-20 09:04:14 EST  EAGLE 30.1.0
    GSM OPTIONS
    -----------------------
    DEFMCC      = NONE
    DEFMNC      = NONE
    SRFADDR     = 123456789abcdef
    MSRNDIG     = RN
    DEFMAPVR    = 1
    SRIDN       = TCAP
    GSM2IS41 = 0123456789abcde
    rlghncxa03w 03-03-20 09:04:14 EST  EAGLE 30.1.0
    SRFADDR=123456789abcdef    SRFNAI=7    SRFNP=15
    MSRNDIG=CCRNDN
    MSRNNAI=7    MSRNNP=15 DEFMAPVR=2

    If the GSM2IS41 parameter is not specified, proceed to 2. However, if it is set with a valid value, proceed to 3.

  2. Use the chg-gsmopts command to specify the GSM to IS-41 migration prefix.

    Refer to the Commands Manual for details. Then re-issue the command that caused this UIM.

  3. If the problem persists with the GSM2IS41 parameter specified, contact My Oracle Support (MOS).