Diameter Peer Node Maintenance Elements

Table 3-3 describes fields on the Peer Nodes maintenance page.

Table 3-3 Peer Nodes Maintenance Elements

Field	Description
Peer Node Name	Name of the Peer Node.
MP Server Hostname	Hostname of MP server from which status is reported. For the Peer Node status: For a Multiple Active DA-MP configuration, the MP Leader always reports the Peer Node status For an Active/Standby DA-MP configuration, the Active DA-MP reports the Peer Node status For Connection status (when the Connection field is expanded): Fixed (non-IPFE) Connections are always reported by the DA-MP that hosts the Fixed Connection Owned IPFE Connections are always reported by the DA-MP that hosts the established IPFE Connection Unowned IPFE Connections (ones that have been configured, but are currently not assigned to a DA-MP by IPFE) are reported by the MP Leader
Dynamic	Indicates whether or not the element was created dynamically (YES) or statically (NO). NO is assigned for all element instances, except for those created via Dynamic Peer Discovery.
Operational Status	Peer Node Operational Status can be: Available: at least one Peer Node connection is available for routing Degraded: the Peer Node connection is not unavailable but it is not operating as expected. The Operational Reason field provides additional information on this status. Unavailable: all connections for a Peer Node are unavailable. The Operational Reason field provides additional information on this status.
Operational Reason	Reason for the Peer Node Operational Status. Information is also available for each connection.
Connection	Number and names of connections associated with the Peer Node.
Time of Last Update	Time stamp that shows the last time the status information was updated.
Peer Node Group Name	A group of Peer Nodes that share common characteristics and attributes. This group is used by IPFE for Peer Node Group Aware connection distribution.
Transaction Configuration Set Name	Unique name of the Transaction Configuration Set.
Peer Node Alarm Group Name	If the Alarm Group feature is enabled (on the Diameter > Configuration > System Options (General Options tab) page), this column displays the peer node alarm group name where the Peer Node is designated.
Alarm IDs	If the Alarm Group feature is enabled (on the Diameter > Configuration > System Options (General Options tab) page), this column displays the Alarm ID raised against the Peer Node. If more than one alarm is raised by the DA-MP for a Peer Node, then the values are separated by a comma.