List of Figures

• 1-1 Selecting RAID Configuration
• 1-2 Begin RAID Configuration
• 1-3 Clear Any Existing RAID Configuration
• 1-4 RAID - Create Virtual Drive
• 1-5 Set Drive to RAID1
• 1-6 RAID - Select Drives
• 1-7 Select All Drives
• 1-8 Save RAID Configuration
• 1-9 Initialize RAID Configuration
• 1-10 Exit RAID Configuration
• 1-11 Oracle X7-2 Configuration A (4x10 GigE NIC)
• 1-12 Oracle X7-2 Configuration B (Two 4x10 GigE NICs)
• 1-13 Oracle X7-2 Configuration B (One QSFP and One 4x10 GigE NICs)
• 1-14 Connecting to USB and SER MGT (COM1) Ports
• 1-15 Connecting to ILOM over the Network
• 1-16 Netra X5-2 for Communications Configuration A (4 Onboard 10 GigE Ports)
• 1-17 Netra X5-2 for Communications Configuration B (4 Onboard 10 GigE Ports & 1 Quad GigE NIC)
• 1-18 Netra 5-2 for Communications Configuration C (4 Onboard 10 GigE Ports & 2 Quad GigE NICs)
• 1-19 Connecting to USB, VGA and SER MGT (COM1) Ports
• 1-20 Connecting to ILOM Port

---

Previous Next

Copyright © 2014, 2020, Oracle and/or its affiliates. All rights reserved.