A.6 LDAPフィルタ定義
この付録に記載されている文書は、Internet Engineering Task ForceのRFC 2254の許可を得て転載されています。この文書は、http://www.ietf.org
にあります。
この文書より後で発行された文書または他の情報が、ここに記載された内容より優先される場合があります。追加情報または補足情報は、前述のWebサイトおよび関連サイトをチェックしてください。
ノート:
オラクル社は、すべての保証を明示的にも暗黙的にも行いません。ここでいう保証には、この情報の使用がいかなる権利も侵害しないという保証や、特定の目的に対する商業性と適合性への暗示的な保証が含まれますが、これに限定されるものではありません。
Network Working Group T. Howes Request for Comments: 2254 Netscape Communications Corp. Category: Standards Track December 1997
LDAP検索フィルタの文字列表現
次の各項では、これについてさらに詳しく説明しています。
A.6.1 「The String Representation of LDAP Search Filters」のステータス
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements.
Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1997). All Rights Reserved.
A.6.2 「The String Representation of LDAP Search Filters」に関するIESGノート
This document describes a directory access protocol that provides both read and update access. Update access requires secure authentication, but this document does not mandate implementation of any satisfactory authentication mechanisms.
In accordance with RFC 2026, section 4.4.1, this specification is being approved by IESG as a Proposed Standard despite this limitation, for the following reasons:
a. to encourage implementation and interoperability testing of these protocols (with or without update access) before they are deployed, and
b. to encourage deployment and use of these protocols in read-only applications.(e.g. applications where LDAPv3 is used as a query language for directories which are updated by some secure mechanism other than LDAP), and
c. to avoid delaying the advancement and deployment of other Internet standards-track protocols which require the ability to query, but not update, LDAPv3 directory servers.
Readers are hereby warned that until mandatory authentication mechanisms are standardized, clients and servers written according to this specification which make use of update functionality are UNLIKELY TO INTEROPERATE, or MAY INTEROPERATE ONLY IF AUTHENTICATION IS REDUCED TO AN UNACCEPTABLY WEAK LEVEL.
Implementors are hereby discouraged from deploying LDAPv3 clients or servers which implement the update functionality, until a Proposed Standard for mandatory authentication in LDAPv3 has been approved and published as an RFC.
A.6.3 「The String Representation of LDAP Search Filters」の概要
The Lightweight Directory Access Protocol (LDAP) [1] defines a network representation of a search filter transmitted to an LDAP server. Some applications may find it useful to have a common way of representing these search filters in a human-readable form. This document defines a human-readable string format for representing LDAP search filters.
This document replaces RFC 1960, extending the string LDAP filter definition to include support for LDAP version 3 extended match filters, and including support for representing the full range of possible LDAP search filters.
A.6.4 LDAP検索フィルタの定義
LDAP検索フィルタの定義について理解します。
An LDAPv3 search filter is defined in Section 4.5.1 of [1] as follows:
Filter::= CHOICE {
and [0] SET OF Filter,
or [1] SET OF Filter,
not [2] Filter,
equalityMatch [3] AttributeValueAssertion,
substrings [4] SubstringFilter,
greaterOrEqual [5] AttributeValueAssertion,
lessOrEqual [6] AttributeValueAssertion,
present [7] AttributeDescription,
approxMatch [8] AttributeValueAssertion,
extensibleMatch [9] MatchingRuleAssertion
}
SubstringFilter::= SEQUENCE {
type AttributeDescription,
SEQUENCE OF CHOICE {
initial [0] LDAPString,
any [1] LDAPString,
final [2] LDAPString
}
}
AttributeValueAssertion::= SEQUENCE {
attributeDesc AttributeDescription,
attributeValue AttributeValue
}
MatchingRuleAssertion::= SEQUENCE {
matchingRule [1] MatchingRuleID OPTIONAL,
type [2] AttributeDescription OPTIONAL,
matchValue [3] AssertionValue,
dnAttributes [4] BOOLEAN DEFAULT FALSE
}
AttributeDescription::= LDAPString
AttributeValue::= OCTET STRING
MatchingRuleID::= LDAPString
AssertionValue::= OCTET STRING
LDAPString::= OCTET STRING
where the LDAPString above is limited to the UTF-8 encoding of the ISO 10646 character set [4]. The AttributeDescription is a string representation of the attribute description and is defined in [1].
The AttributeValue and AssertionValue OCTET STRING have the form defined in [2]. The Filter is encoded for transmission over a network using the Basic Encoding Rules defined in [3], with simplifications described in [1].
A.6.5 文字列検索フィルタの定義
LDAP検索フィルタの文字列表現について理解します。
The string representation of an LDAP search filter is defined by the following grammar, following the ABNF notation defined in [5]. The filter format uses a prefix notation.
filter = "(" filtercomp ")"
filtercomp = and / or / not / item
and = "&" filterlist
or = "|" filterlist
not = "!" filter
filterlist = 1*filter
item = simple / present / substring / extensible
simple = attr filtertype value
filtertype = equal / approx / greater / less
equal = "="
approx = "~="
greater = ">="
less = "<="
extensible = attr [":dn"] [":" matchingrule] ":=" value
/ [":dn"] ":" matchingrule ":=" value
present = attr "=*"
substring = attr "=" [initial] any [final]
initial = value
any = "*" *(value "*")
final = value
attr = AttributeDescription from Section 4.1.5 of [1]
matchingrule = MatchingRuleId from Section 4.1.9 of [1]
value = AttributeValue from Section 4.1.6 of [1]
The attr, matchingrule, and value constructs are as described in the corresponding section of [1] given above.
If a value should contain any of the following characters
Character ASCII value ---------------------------
* 0x2a
( 0x28
) 0x29
\ 0x5c
NUL 0x00
then the character must be encoded as the backslash '\' character (ASCII 0x5c) followed by the two hexadecimal digits representing the ASCII value of the encoded character. The case of the two hexadecimal digits is not significant.
This simple escaping mechanism eliminates filter-parsing ambiguities and allows any filter that can be represented in LDAP to be represented as a NUL-terminated string. Other characters besides the ones listed above may be escaped using this mechanism, for example, non-printing characters.
For example, the filter checking whether the "cn" attribute contained a value with the character "*" anywhere in it would be represented as
"(cn=*\2a*)".
Note that although both the substring and present productions in the grammar above can produce the "attr=*" construct, this construct is used only to denote a presence filter.
A.6.6 文字列検索フィルタの使用
いくつかの例を使用して文字列検索フィルタの使用方法を理解します。
この項では、次の項目について説明します。
A.6.6.1 単純な文字列検索フィルタの使用
次の例は、文字列検索フィルタの単純な使用例を示しています。
(cn=Babs Jensen)
(!(cn=Tim Howes))
(&(objectClass=Person)(|(sn=Jensen)(cn=Babs J*)))
(o=univ*of*mich*)
A.6.6.2 拡張可能一致による文字列検索フィルタの使用
The following examples illustrate the use of extensible matching.
(cn:1.2.3.4.5:=Fred Flintstone)
(sn:dn:2.4.6.8.10:=Barney Rubble)
(o:dn:=Ace Industry)
(:dn:2.4.6.8.10:=Dino)
The second example illustrates the use of the ":dn" notation to indicate that matching rule "2.4.6.8.10" should be used when making comparisons, and that the attributes of an entry's distinguished name should be considered part of the entry when evaluating the match.
The third example denotes an equality match, except that DN components should be considered part of the entry when doing the match.
The fourth example is a filter that should be applied to any attribute supporting the matching rule given (since the attr has been left off). Attributes supporting the matching rule contained in the DN should also be considered.
A.6.6.3 エスケープ・メカニズムによる文字列検索フィルタの使用
The following examples illustrate the use of the escaping mechanism.
(o=Parens R Us \28for all your parenthetical needs\29)
(cn=*\2A*)
(filename=C:\5cMyFile)
(bin=\00\00\00\04)
(sn=Lu\c4\8di\c4\87)
The first example shows the use of the escaping mechanism to represent parenthesis characters. The second shows how to represent a "*" in a value, preventing it from being interpreted as a substring indicator. The third illustrates the escaping of the backslash character.
The fourth example shows a filter searching for the four-byte value 0x00000004, illustrating the use of the escaping mechanism to represent arbitrary data, including NUL characters.
The final example illustrates the use of the escaping mechanism to represent various non-ASCII UTF-8 characters.
A.6.7 「The String Representation of LDAP Search Filters」のセキュリティに関する考慮事項
This memo describes a string representation of LDAP search filters. While the representation itself has no known security implications, LDAP search filters do. They are interpreted by LDAP servers to select entries from which data is retrieved. LDAP servers should take care to protect the data they maintain from unauthorized access.
A.6.8 「The String Representation of LDAP Search Filters」のリファレンス
この項には、「The String Representation of LDAP Search Filters」のリファレンスがあります。
次の項目は、リファレンスとして使用します。
[1] Wahl, M., Howes, T., and S. Kille, "Lightweight Directory Access
Protocol (v3)", RFC 2251, December 1997.
[2] Wahl, M., Coulbeck, A., Howes, T., and S. Kille, "Lightweight
Directory Access Protocol (v3): Attribute Syntax Definitions", RFC
2252, December 1997.
[3] Specification of ASN.1 encoding rules: Basic, Canonical, and
Distinguished Encoding Rules, ITU-T Recommendation X.690, 1994.
[4] Yergeau, F., "UTF-8, a transformation format of Unicode and ISO
10646", RFC 2044, October 1996.
[5] Crocker, D., "Standard for the Format of ARPA Internet Text
Messages", STD 11, RFC 822, August 1982.
A.6.9 「The String Representation of LDAP Search Filters」の著者の住所
この項には、「The String Representation of LDAP Search Filters」の著者の住所が記載されています。
Tim Howes Netscape Communications Corp. 501 E. Middlefield Road Mountain View, CA 94043 USA Phone: +1 415 937-3419 EMail: howes@netscape.com
A.6.10 「The String Representation of LDAP Search Filters」の著作権情報
Copyright (C) The Internet Society (1997). All Rights Reserved.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.