SIP Interface

The full SIP interface should be configured according to your network needs. Please refer to the Oracle SBC ACLI Configuration Guide.

To configure a SIP Digest Authentication on a specific SIP Interface:

1. In Superuser mode, type configure terminal and press Enter.

   ORACLE# configure terminal

2. Type session-router and press Enter to access the session router path.

   ORACLE(configure)# session-router

3. Type sip-interface and press Enter. The system prompt changes to let you know that you can begin configuring individual parameters.

   ORACLE(session-router)# sip-interface
   ORACLE(sip-interface)#

4. Type select and choose the number of the pre-configured sip interface you want to configure.

   ORACLE(sip-interface)# select
   <realm-id>:
   1: private 192.168.101.17:5060
   2: public  172.16.101.17:5060
   selection: 1

5. registration-caching—Set this parameter to enabled.
6. ims-access—Set this parameter to enabled for access interfaces, when applicable. Core interfaces should have this feature disabled.
7. sip-authentication-profile—Set this to the name of an existing sip-authentication profile if you wish to authenticate per SIP interface.
8. Type done when finished.