Configuring Credit Card Terminals (PIN Entry Payment Devices)

Prerequisites for Configuring Credit Card Terminals

OPERA Cloud supports Chip and PIN for credit card authorizations and payments. Chip and PIN payment utilizes the EMV standard and requires a microchip on the credit card that holds the cardholder authentication information. To process Chip and PIN payments, you must set up the Chip and PIN payment devices available at your property. Chip & PIN devices can be grouped by device areas to assist mobile users with finding the required, nearby device.

Adding Credit Card Terminals

1. From the Administration menu, select Interfaces, select Interface Devices, and then select Credit Card Terminals.

2. Click New and enter the following details:

   1. Property: Enter or select the property

   2. Terminal ID: Enter the terminal ID number provided by the vendor. 

   3. Terminal Label: Enter a label or name for the device that identifies its physical location. 

   4. Device Area: Link the device to an area. Refer to Configuring Device Areas.

3. Click Save.

Editing Credit Card Terminals

1. From the Administration menu, select Interfaces, select Interface Devices, and then select Credit Card Terminals.

2. Enter search criteria and click Search.

3. Select the device, then click the vertical ellipsis and select Edit.

4. Update configuration.

5. Click Save.

Deleting Credit Card Terminals

1. From the Administration menu, select Interfaces, select Interface Devices, and then select Credit Card Terminals.

2. Enter search criteria and click Search.

3. Select the device, then click the vertical ellipsis and select Delete.

4. Click Delete to confirm.

• Prerequisites for Configuring Credit Card Terminals