6000000000000080 - PDB Backup failed

The PDB backup failed because of at least one of the following conditions:

• A manual backup script was not able to create PDB backup successfully

• A PDB backup was already in progress when Automatic PDB backup attempted to start

• A PDB restore was in progress when the Automatic PDB backup attempted to start

To verify the exact failure condition, refer to the error string in the log file.

Note:

This alarm will also clear if the Automatic PDB/RTDB backup executes successfully during the next scheduled backup time.

Recovery

1. To clear this alarm immediately, perform one of the following:

   • Cancel the Automatic PDB / RTDB backup via the EPAP GUI as follows:

     Note:

     Automatic PDB / RTDB Backup will have to be rescheduled if it is cancelled.

     1. Log in to the User Interface screen of the EPAP GUI (see Accessing the EPAP GUI).

     2. From the menu, select Maintenance>Automatic PDB/RTDB Backup to display the automatic backup screen.

     3. From the Automatic PDB/RTDB Backup screen, select None as the Backup Type.

     4. Select the Schedule Backup button to complete the cancellation.

        Automatic PDB/RTDB Backup will have to be rescheduled. Refer to Administration Guide to reschedule the Automatic PDB / RTDB Backup.

   • Perform a manual backup via the EPAPGUI (see Backing Up the PDB).