Go to main content

800 GB Medium Endurance SAS-3 SFF SSD Specification

Exit Print View

Updated: July 2020
 
 

Drive Specification

Table 1  Power Requirements
Condition
+5 VDC (-5%, +7%)
+12 VDC (-5%, +10%)
Max current peak
1.4 A
1.0 A
Read/Write typical max (rms)
1.02 A
0.75 A
Maximum power (Max power is measured as the average power in a 1ms interval)
5.1 W
10.2 W
Table 2  Physical Characteristics
Height
Width
Depth
Weight
15 mm
70.10 mm
100.45 mm
0.16 kg
  • Note: The physical characteristics do not include the bracket.

Table 3  Usage Information
Usage
Description
Useful life
Minimum 5 years
Expected annualized failure rate (AFR) for normal 24/7 operating conditions
0.44%
Operating temperature (Case)
0 to 65 degrees Celsius

Note -  Derating of AFR applies above 40 degrees Celsius

Maximum temperature (SMART trip)
70 degrees Celsius (Drive voids warranty above 85 degrees Celsius)

Note -  Drive may be rendered unusable above 65 degree Celsius

Other environmental factors
Conforms to IEC standards
Table 4  Drive Performance
Attribute
Value
Random 4KB read per second
430K IOPS
Random 4KB write per second
155K IOPS
Sustained sequential read
2100 MB/second
Sustained sequential write
1300 MB/second
Interface data transfer rate
12Gbps/6Gbps/3Gbps/1.5Gbps (auto negotiation, dual port, full duplex)
Table 5  SSD Characteristics
Attribute
Value
Endurance (per JESD 218)
10 DWpD for 5 years
Capacity 1,562,824,367 LBA of (512+8)B
1,562,824,367 LBA of (512+8)B