200 Gbyte, 2.5-inch, High Endurance Solid State Drive, 12Gbps SAS-3 Interface Drive Specification

Drive Specification

Table 1  Power Requirements

Condition +5 VDC (-5%, +7%) +12 VDC (-5%, +10%) Max peak current peak 1.4 A 1.00 A Read/Write typical max (rms) 0.82 A 0.71 A Maximum power (Max power is measured as the average power in a 1ms interval.) 4.1 W 8.94 W

Table 2  Physical Characteristics

Height (max) Width (max) Depth (max) Weight (max) 15 mm 70.10 mm 100.45 mm 0.16 kg

• Note: The physical characteristics do not include the bracket.

Table 3  Usage Information

Usage Description Useful life 5 years minimum Expected annualized failure rate (AFR) for normal 24/7 operating conditions 0.44% Operating temperature (Case) 0 to 65 degrees Celsius Note -  Derating of AFR applies above 40 degrees Celsius. Maximum temperature (SMART trip) 70 degrees Celsius (Drive voids warranty above 85 degrees Celsius) Note -  Drive may be rendered unusable above 85 degrees Celsius. Other environmental factors Conforms to IEC standards

Table 4  Drive Performance

Attribute Value Random 4KB read per sec 380K IOPS Random 4KB write per sec 160K IOPS Sustained sequential read 2150 MB/sec Sustained sequential write 1050 MB/sec Interface data transfer rate 12Gbps/6Gbps/3Gbps/1.5Gbps (auto negotiation, dual port, full duplex) Power-on to ready (full rebuild) <50 sec End-to-end T10DIF Type

Table 5  SSD Characteristics

Attribute Value Endurance (per JESD 218) 20 DWpD for 5 years Capacity 390,721,968 LBA of (512+8)B