Meta-SQL Reference
This section discusses meta-SQL elements in alphabetical order.
Note: The parameter recname refers to a record name, not a table name. If you specify a table name (for example, PS_ST_OPTION_PARMS) you receive a SQL error. Use the record name (for example, ST_OPTION_PARMS) instead. Also, do not use quotation marks around a record name.
Syntax
%Abs(x)
Description
Use the %Abs meta-SQL construct to return a decimal value equal to the absolute value of a number x.
Note: This meta-SQL construct is not implemented for COBOL.
Example
SELECT INVENTORY_CODE FROM INVENTORY_TABLE WHERE %ABS(NEW_AMOUNT - OLD_AMOUNT) > SOME_ALLOWED_VALUE
Syntax
%BINARYSORT(Recname)
Description
Any in-memory sorting performed using COBOL language functions is performed as a binary sort in the current character set used for COBOL processing, and may not necessarily match the sort order returned by the database in response to an Order By clause. Should you require the database to return data sorted using a binary sort of its encoding rather than the default linguistically-correct sort, you must use the %BINARYSORT meta-SQL function around each column in the Where or Order By clause where binary ordering is important.
However, for z/OS implementations, keep in mind that this binary sorting is only equivalent when the COBOL program is run z/OS server. For example, the binary sort produced in COBOL differs from the binary sort produced by the database, as the database is encoded in extended binary-coded decimal interchange code (EBCDIC) and the client is in an ASCII-based encoding. Therefore, %BINARYSORT should only be used in COBOL programs that are not run using the RemoteCall function, where the z/OS platform is not supported as a RemoteCall server.
When running against non-z/OS systems, %BINARYSORT can be used in both RemoteCall and non-RemoteCall programs.
Note: Using %BINARYSORT in
Where and Order By clauses negates the use of any indexes, as most
databases can't use indexes for functional comparisons. (For example, WHERE %BINARYSORT(column)
> 'X'
). Use this syntax only when sorting equivalence of
SQL statement results and COBOL memory order is required.
Parameters
Field or Control |
Definition |
---|---|
Recname |
Specify the record name to use with the sorting. |
Example
SELECT RECNAME FROM PSRECDEFN WHERE %BINARYSORT(RECNAME) < %BINARYSORT('xxx')
SELECT RECNAME FROM PSRECDEFN ORDER BY %BINARYSORT(RECNAME)
Syntax
%Cast(source_expr, source_type, target_type[, precision[.scale]])
Description
Use the %Cast meta-SQL function to convert a PeopleSoft data type to a Character data type. A database-generated error is returned if the function attempts to make an invalid conversion. %Cast can be used wherever %DateOut, %TimeOut, %DateTimeOut, %CurrentDateOut, %CurrentTimeOut, %CurrentDateTimeOut, and %NumToChar functions can be used.
Note: %NumToChar will preserve all trailing zeroes. Therefore, use the scale parameter of %Cast to specify the number of trailing zeroes.
On some platforms the meta-SQL functions %DateOut, %TimeOut, %DateTimeOut, %CurrentDateOut, %CurrentTimeOut and %CurrentDateTimeOut don’t return a Character value. On other platforms, these functions return a Character string only in certain cases. %Cast returns a Character value on all supported platforms.
Use %Cast only in the Select portion of query. Do not use it in a Where clause or in Insert or Update statements.
Parameters
Field or Control |
Definition |
---|---|
source_expr |
Specify the input expression in the form of a Number, Long Character, Date, Time, or DateTime column name or as a %CurrentDateOut, %CurrentTimeOut, or %CurrentDateTimeOut meta-SQL variable. This parameter is not case sensitive. |
source_type |
Specify the source data type. Valid data types are Number, Long, Date, Time, and DateTime. This parameter is not case sensitive. |
target_type |
Currently the only target type supported is Character. |
precision.scale |
The precision.scale parameter is currently supported on DB2 for z/OS only and with a source type of Number. While this parameter can be supplied on other platforms, it is ignored. This parameter is optional. The scale parameter
is an optional part of this parameter. Therefore, the expression |
Syntax
%COALESCE(expr1, expr2, ...)
Description
Use the %COALESCE function to return the first non-null argument provided to the function.
Note: This meta-SQL function is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
expr1. . .exprn |
Specify the expressions to check. Note: You cannot specify bind parameters using these expressions. |
Note: %COALESCE has been deprecated but remains for backward compatibility only. Use your database's native COALESCE function instead.
Example
The following example uses the PRODUCT_INFO table to organize a clearance sale of products. It gives a 10 percent discount to all products with a list price. If there is no list price, the sale price is the minimum price. If there is no minimum price, the sale price is 10.
SELECT product_id, list_price, min_price, %COALESCE(0.9*list_price, min_price, 10) "Sale"
from PRODUCT_INFO
where SUPPLIER_ID = 6009;
Syntax
string1 %Concat string2
Description
At runtime, the %Concat meta-SQL variable is replaced by the string concatenation operator appropriate for the relational database management system (RDBMS) being used. For example, on DB2, the %Concat meta-SQL variable is replaced with CONCAT, while on SQL Server it's replaced with a +, and on Oracle it’s replaced with ||.
This meta-SQL variable is supported with the same limitations as the native concatenation operator for the RDBMS where the meta-SQL is being executed. For example, some platforms enable you to concatenate a string with a numeric value; others flag this as an error. PeopleTools makes no attempt to check or convert the data types of either of the operands.
Note: Concat is not available in COBOL, but the DYN-STMT-CONCAT field can be strung into dynamic COBOL strings to resolve into a platform-specific concatenation operator.
Example
Example 1:
SELECT LAST_NAME %Concat ',' %Concat FIRST_NAME FROM PS_EMPLOYEE
Example 2:
SELECT PORTAL_NAME
, PORTAL_LABEL
, %TrimSubstr(PORTAL_OBJNAME,1,30) %Concat ':' %Concat %TrimSubstr(PORTAL_NAME,1,30)
FROM PSPRSMDEFN
WHERE PORTAL_PRNTOBJNAME = 'CO_NAVIGATION_COLLECTIONS'
AND PORTAL_REFTYPE = 'F'
Description
The %CurrentDateIn meta-SQL variable expands to a platform-specific SQL substring representing the current date in the Where clause of a SQL Select or Update statement, or when the current date is passed in an Insert statement.
Description
The %CurrentDateOut meta-SQL variable expands to platform-specific SQL for the current date in the Select clause of a SQL query.
Description
The %CurrentDateTimeIn meta-SQL variable expands to a platform-specific SQL substring representing the current datetime in the Where clause of a SQL Select or Update statement, or when the current date time is passed in an Insert statement.
Description
The %CurrentDateTimeOut meta-SQL variable expands to platform-specific SQL for the current datetime in the Select clause of a SQL query.
Description
The %CurrentTimeIn meta-SQL variable expands to a platform-specific SQL substring representing the current time in the Where clause of a SQL Select or Update statement, or when the current time is passed in an Insert statement.
Description
The %CurrentTimeOut meta-SQL variable expands to platform-specific SQL for the current time in the Select clause of a SQL query.
Syntax
%DatabaseRelease([descr_level])
Description
The %DatabaseRelease meta-SQL variable returns the database version of the current database connection. The return value is a number or a string depending on descr_level. Optionally specify the description level as MAJOR, FULL, or DESCR.
If MAJOR is specified, %DatabaseRelease returns the major release number as a number value.
If FULL is specified, %DatabaseRelease returns the full release and version as a string value.
If DESCR is specified, %DatabaseRelease returns the full release and version with description as a string value.
Parameters
Field or Control |
Definition |
---|---|
descr_level |
Specify the level of description to be returned. Valid values are MAJOR, FULL, and DESCR. This parameter is optional. The default is MAJOR. |
Example
If the current database is Oracle Database 10g Enterprise Edition Release 10.2.0.3.0- 64-bit Production With the Partitioning and Data Mining option:
SQLExec("SELECT %DatabaseRelease(MAJOR) from %SelectDummyTable", &DBRel);
Returns 10
.
SQLExec("SELECT %DatabaseRelease(FULL) from %SelectDummyTable", &DBRel);
Returns '10.2.0.3.0'
,
SQLExec("SELECT %DatabaseRelease(DESCR) from %SelectDummyTable", &DBRel);
Returns 'Oracle Database 10g Enterprise
Edition Release 10.2.0.3.0- 64bit Production With the Partitioning
and Data Mining options'
.
Syntax
%DateAdd(date_from, add_days)
Description
The %DateAdd meta-SQL function returns a date by adding add_days to date_from. The add_days variable can be negative.
Example
SQLExec("SELECT %DateAdd(%DateIn('2002-02-02'), 12) from %SelectDummyTable", &add);
WinMessage(&add);
Syntax
%DateDiff(date_from, date_to)
Description
The %DateDiff meta-SQL
function returns an integer representing the difference between two
dates in number of days. For example: diff = date_to - date_from
Example
%DateDiff(%DateIn('1966-06-30'), %DateIn('1997-01-01'))
%DateDiff( date1_column, date2_column)
%DateDiff( %DateAdd(date1_column, 30), date2_column)
The following usage is illegal (always use %Datein for inputting date literals):
%DateDiff('1996-06-30', '1997-01-01') /* should use %DateIn for inputting date literals */
Syntax
%DateIn(dt)
Description
The %DateIn meta-SQL variable expands into platform-specific SQL syntax for the date. Use %DateIn whenever a date literal or Date bind variable is used in a comparison in the Where clause of a Select or Update statement, or when a Date value is passed in an Insert statement.
Restrictions Using COBOL
You can only use string literals when using this construct in COBOL. You cannot use it with bind parameters in COBOL. For example, the following works in COBOL:
UPDATE PS_PERSONAL_DATA SET LASTUPDT = %DATEIN('2002-12-11')
The following SQL fails:
UPDATE PS_PERSONAL_DATA SET LASTUPDT = %DATEIN(:1)
Parameters
Field or Control |
Definition |
---|---|
dt |
Specify either a Date value or a date literal in YYYY-MM-DD format. |
Syntax
%DateNull
Description
Use the %DateNull meta-SQL variable to specify a null value for a Date field. Only use this meta-SQL in Insert or Update clauses. Do not use this meta-SQL in a Where clause.
Note: This meta-SQL variable is not implemented for COBOL.
This meta-SQL resolves into a database-specific SQL substring, as shown in the following table:
Database |
Resolved Substring |
---|---|
DB2 |
NULLIF(CURRENT DATE, CURRENT DATE) |
All others |
NULL |
Parameters
None.
Syntax
%DateOut(dt)
Description
The %DateOut meta-SQL variable expands to either a platform-specific SQL substring or datetime value, depending on the database platform, representing a datetime column in the Select clause of a SQL query
Parameters
Field or Control |
Definition |
---|---|
dt |
Specify dt as a date column. Note: You cannot specify a
literal value for dt. Code such as |
Syntax
%DatePart(DTTM_Column)
Description
The %DatePart meta-SQL variable returns the date portion of the specified DateTime column.
Note: This meta-SQL variable is not implemented for COBOL.
Considerations using %DatePart
Use %DateOut meta-SQL when fetching values, as in the following example:
%DateOut(%DatePart(DTTM_COLUMN)) from some_table
If a literal is used as the parameter to %DatePart, it must be wrapped in %DateTimeIn:
insert into some_table values(%DatePart(%DateTimeIn('2001-01-01-12.34.56.789012')))
Parameters
Field or Control |
Definition |
---|---|
DTTM_Column |
Specify the datetime column from which you want to return the date. |
Syntax
%DateTimeDiff(datetime_from, datetime_to)
Description
The %DateTimeDiff meta-SQL function returns a time value, representing the difference between two date times in minutes.
Example
The following example returns the difference in hours between the current datetime and the requested datetime:
%DateTimeDiff(%CurrentDateIn, RQSTDTTM) < " | RECORD.FIELDNAME * 60;
The following example returns the difference in minutes:
%DateTimeDiff(%CurrentDateIn, RQSTDTTM) < " | RECORD.FIELDNAME;
Syntax
%DateTimeDiffExtended(datetime_from, datetime_to, granularity, precision)
Description
The %DateTimeDiff meta-SQL function returns a numeric value, representing the difference between two date times.
The granularity determines what that value represents:
DAYS or DAY — Difference in number of days.
HOURS or HOUR — Difference in number of hours.
MINUTES or MINUTE — Difference in number of minutes.
SECONDS or SECOND — Difference in number of seconds.
The precision specifies how many decimal places the result may have. The valid values are 0–5.
Example
The following two examples both return name of every batch process that is queued to be run in the next hour:
SELECT PRCSNAME FROM PSPRCSRQST WHERE RUNSTATUS = '5' AND %DateTimeDiffExtended(RQSTDTTM, %CURRENTDATETIMEIN, HOUR, 0) < 1;
SELECT PRCSNAME FROM PSPRCSRQST WHERE RUNSTATUS = '5' AND %DateTimeDiffExtended(RQSTDTTM, %CURRENTDATETIMEIN, MINUTE, 0) < 60;
Syntax
%DateTimeIn(dtt)
Description
The %DateTimeIn meta-SQL variable expands to platform-specific SQL for a DateTime value in the Where clause of a SQL Select or Update statement, or when a DateTime value is passed in an Insert statement.
Restrictions Using COBOL
You can only use string literals when using this construct in COBOL. You cannot use it with bind parameters in COBOL. For example, the following works in COBOL:
UPDATE PS_PERSONAL_DATA SET LASTUPDTTM = %DATETIMEIN('2002-12-11-11.59.00.000000')
The following SQL fails:
UPDATE PS_PERSONAL_DATA SET LASTUPDTTM = %DATETIMEIN(:1)
Parameters
Field or Control |
Definition |
---|---|
dtt |
Specify either a DateTime bind variable or a string literal in the form YYYY-MM-DD-hh.mm.ss.ssssss. |
Syntax
%DateTimeNull
Description
Use the %DateTimeNull meta-SQL variable to specify a null value for a DateTime field. Only use this meta-SQL in Insert or Update clauses. Do not use this meta-SQL in a Where clause.
Note: This meta-SQL is not implemented for COBOL.
This meta-SQL resolves into a database-specific SQL substring, as shown in the following table:
Database |
Resolved Substring |
---|---|
DB2 |
NULLIF(CURRENT TIMESTAMP, CURRENT TIMESTAMP) |
All others |
NULL |
Parameters
None.
Example
%InsertSelect(LEDGER_KK_WK2,LEDGER_KK_WRK, CURRENCY_CD = %Bind(TO_CURRENCY) ,POSTED_TOTAL_AMT = SUM(POSTED_BASE_AMT),POSTED_TRAN_AMT = 0,POSTED_BASE_AMT = 0,BASE_CURRENCY = %Bind(TO_CURRENCY),PROCESS_INSTANCE = %Bind(PROCESS_INSTANCE),DTTM_STAMP_SEC = %DateTimeNull)
FROM PS_LEDGER_KK_WRK
WHERE PROCESS_INST_STG = %Bind(PROCESS_INSTANCE)
AND CURRENCY_CD <> %Bind(TO_CURRENCY)
GROUP BY PROCESS_INST_STG, BUSINESS_UNIT,LEDGER, ACCOUNT, %List(FIELD_LIST, CFCC1_AK_SBR) ,STATISTICS_CODE, FISCAL_YEAR,ACCOUNTING_PERIOD
Syntax
%DateTimeOut(datetime_col)
Description
The %DateTimeOut meta-SQL variable expands to either a platform-specific SQL substring or datetime value, depending on the database platform, representing a datetime column in the Select clause of a SQL query
Parameters
Field or Control |
Definition |
---|---|
datetime_col |
Specify a datetime column. |
Syntax
%DecDiv(a,b)
Description
The %DecDiv meta-SQL function returns a number representing the value of a divided by b, where a and b are numeric expressions.
If the result needs to be picked up by a bind variable, pick it up using the Character type or PIC X(50).
Parameters
Field or Control |
Definition |
---|---|
a |
Specify the dividend as a number. |
b |
Specify the divisor as a number. |
Example
%DecDiv(1000.0, :1)
In the example, :1 is a bind variable in SQLExec PeopleCode.
Syntax
%DecMult(a,b)
Description
The %DecMult meta-SQL function returns a number representing a multiplied by b, where a and b are numeric expressions.
If the result needs to be picked up by a bind variable, pick it up using the Character type or PIC X(50).
Note: %DecMult is replaced with a simple multiplication function on all platforms except for the DB2 for OS/390 and z/OS platform. On this platform, it is converted to MULTIPLY_ALT. The MULTIPLY_ALT scalar function returns the product of the two arguments as a decimal value. It is provided as an alternative to the multiplication operator, especially when the sum of the precision of the arguments exceeds 31.
Note: If you receive an overflow error using this meta-SQL, you may need to use the CAST function on the MSSQL, ORACLE, DB2UNIX and DB2 for OS/390 platforms.
Parameters
Field or Control |
Definition |
---|---|
a |
Specify a number to be multiplied. |
b |
Specify a number to use for multiplying. |
Example
%DecMult(12.3, 34.67)
%DecMult(c1 + c2, c3)
In the example, c1, c2, and c3 are fields of the Number data type.
Syntax
%DTTM(date, time)
Description
The %DTTM meta-SQL function combines the database date in the date value with the database time in the time value and returns a database timestamp value.
Note: For Microsoft SQL Server and DB2 databases, do not use null characters for the time argument. You can use default values such as 00.00.00.000000.
Note: This meta-SQL function is not implemented for COBOL.
Example
INSERT INTO TABLE1 (TIMESTAMP) SELECT %DTTM(DATE,TIME) FROM TABLE2
Syntax
%EffDtCheck(recordname [correlation_id1], correlation_id2, as_of_date)
Description
The %EffDtCheck construct expands into an effective date subquery suitable for a Where clause. The value for as_of_date is automatically wrapped in %DateIn unless as_of_date is already wrapped in %DateIn or refers to other database columns.
Note: This meta-SQL construct is not implemented for COBOL.
%EffDtCheck only works with effective dates. It does not take effective sequence numbers (EFFSEQ) into account. It also does not do effective-status (EFF_STATUS) checking.
Parameters
Field or Control |
Definition |
---|---|
recordname |
Specify the record name to use as the record in the effective-date checking. This can be a bind variable, a record object, or a record name in the form recname. You cannot specify a RECORD. recname, a record name in quotation marks, or a table name. Note: If you specify a bind variable, it should refer to a record object, not a string variable. |
correlation_id1 |
(Optional) Specify the letter used inside the effective-dating subselect. If this parameter isn't specified, recordname is used. |
correlation_id2 |
Specify the letter already assigned to the main record in the From clause of the SQL statement. |
as_of_date |
Specify the date to use in the effective date. This can be a bind variable, a variable, or a hard-coded date. The value for as_of_date is automatically wrapped in %DateIn unless as_of_date is already wrapped in %DateIn or refers to other database columns. |
Example
The following is a generic code sample:
SELECT. . .
FROM. . .
WHERE %EffDtCheck(recordname correlation_id, as_of_date)
The example code resolves into the following:
SELECT . . .
FROM. . .
WHERE correlation_id.EFFDT = (SELECT MAX(EFFDT) FROM recordname
WHERE recordname.KEYFIELD1 = correlation_id.KEYFIELD1
AND recordname.KEYFIELD2 = correlation_id.KEYFIELD2
AND. . .
AND recordname.EFFDT <= %DATEIN(as_of_date))
In the following example, &Date has the value of 01/02/1998. The example &Rec object has an EFFDT key field.
SQLExec("SELECT FNUM FROM PS_REC A WHERE %EffDtCheck(:1, A, :2)", &Rec, &Date);
This example code resolves into the following:
"Select FNUM from PS_REC A where EFFDT = (select MAX(EFFDT)
from PS_REC
where PS_REC.FNUM = A.FNUM
and PS_REC.EFFDT <= %DateIn('1998-01-02') )"
The following example uses correlation IDs:
SELECT A.DEPTID
FROM %Table(DEPT_TBL) A
WHERE
%EffDtCheck(DEPT_TBL B, A, %CurrentDateIn)
AND A.EFF_STATUS = 'A'
This example code resolves into the following:
SELECT A.DEPTID
FROM %Table(DEPT_TBL) A
WHERE
A.EFFDT =
(SELECT MAX(B.EFFDT)
FROM DEPT_TBL B
WHERE
A.SETID = B.SETID
AND A.DEPTID = B.DEPTID
AND B.EFFDT <=%CurrentDateIn)
AND A.EFF_STATUS = 'A'
Syntax
%FirstRows(n)
Description
The %FirstRows meta-SQL variable is replaced by database-specific SQL syntax to optimize retrieval of n rows. Depending on the database, this variable optimizes:
The query path.
The number of rows returned.
The number of rows returned per fetch buffer.
Considerations Using %FirstRows
Consider the following when using %FirstRows:
Using %FirstRows does not mean only the first n rows are returned.
It means that the SQL is optimized for the first n rows where the platform supports it. More rows might be returned, depending on the platform.
It is the application's responsibility to stop fetching when enough rows have been returned.
This meta-SQL variable is not implemented for COBOL or dynamic view SQL.
Do not use this meta-SQL variable if the application might require more than n rows fetched.
The results of fetching more than n rows varies by platform. Some return the extra rows, but performance may be suboptimal. Others return the message "ROW NOT FOUND".
Place this meta-SQL variable between the Select statement that begins the SQL statement and the Select List statement.
Do not use it in subqueries, views, Insert/Select statements, and so on. Do not use a wildcard (*) with the Select List statement.
Do not use this meta-SQL variable with Distinct statements, because the code
SELECT TOP 1 DISTINCT
fails on Microsoft SQL Server.This meta-SQL variable is implicitly embedded in all Select statements for SQLExecs for all platforms except Oracle.
Parameters
Field or Control |
Definition |
---|---|
n |
Specify the number of rows to optimize retrieval for. |
Example
The following code checks for the existence of a row:
&SQL = CreateSQL("select %firstrows(1) 'x' from PS_EXAMPLE where COL1 = :1", &temp);
The following populates a 10-element array:
&SQL = CreateSQL("select %firstrows(10) COL2, COL3 from PS_EXAMPLE_VW where COL1 = :1", &temp);
Syntax
%InsertSelect([DISTINCT, ]insert_recname, select_recname [ correlation_id][, select_recname_n [ correlation_id_n]] [, override_field = value]. . .)
Description
The %InsertSelect meta-SQL construct generates an Insert statement with a Select statement. It does not generate a From statement. You must specify the select records before you specify override fields.
Note: %InsertSelect has a limit of 99 override fields.
The Insert column list is composed of all the fields in the specified insert_recname, with the exception of LongChar or Image fields.
Note: Because of the way long values (LongChar and Image fields) are handled in the various database platforms for Insert statements, all long values in insert_recname are skipped in the generated Insert statement. This implies that these fields should be defined in such a manner as to allow null values.
If you need to include long values in insert_recname use %InsertSelectWithLongs.
The corresponding value in the Select list is generated based on the following precedence:
If the Insert fieldname appears as an override_field, the corresponding value is used in the Select list.
If the Insert field name matches a field name in one of the select_recname variables specified, the corresponding Select field is used in the Select list.
The search order of the select_recname records is the order that they are specified in the %InsertSelect function.
If the Insert field name has a constant default value defined in Application Designer, that value is used in the Select list.
A default value appropriate for the data type of the Insert field is used (blank for characters, zero for numbers, NULL for Date, Time, and DateTime values, and so on.)
Use the optional override_field variable to specify values for a particular field.
Note: You cannot use bind variables with the override_field.
For each field you specify, the matching logic described in the preceding list is not performed. Instead, the value that you specify after the equal sign is used for that field in the actual Select list. Use this technique to let PeopleTools or Application Engine handle most of the fields in the record, while specifying some of them explicitly. Also, you can use override_field to specify aggregate functions like Sum, Max, and so on.
Note: This meta-SQL is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
DISTINCT |
Specify if the Select statement being generated should contain a Distinct clause. |
insert_recname |
Specify the name of record being inserted into. You must specify a record name, not RECORD. recname, a record name in quotation marks, a bind variable, or a table name. Note: If the record for insert_recname is a temporary table, %InsertSelect automatically substitutes the corresponding table instance (PS_TARGETnn instead of PS_TARGET). |
select_recname |
Specify the name of record being selected from. You can specify more than one record. You must specify a record name, not a RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id |
Identify the correlation ID to be used for the select_recname records and fields. |
override_field |
Specify the name of a field on insert_recname that you want to supply a value for (instead of using the value supplied from the select_recname.) |
Value |
Specify the value that should be used for the override_field instead of the value from select_recname. |
Example
Here is a basic example:
%InsertSelect(AE_SECTION_TBL, AE_STEP_TBL S, AE_SECTION_TYPE = ' ')
FROM PS_AE_STEP_TBL S, PS_AS_STMT_TBL T
WHERE. . .
The example code resolves into the following:
INSERT INTO PS_AE_SECTION_TBL (AE_APPLID, AE_SECTION,. . ., AE_SECTION_TYPE)
SELECT S.AE_APPL_ID, S.AE_SECTION, . . . ' '
FROM PS_AE_STEP_TBL S, PS_AS_STMT_TBL T
WHERE. . .
In the following example, you have a temporary table, PS_MY_TEMP, which is based on a join between two other tables, PS_MY_TABLE1 and PS_MY_TABLE2:
%InsertSelect(MY_TEMP, MY_TABLE1, MY_TABLE2 T2)
FROM PS_MY_TABLE1 T1, PS_MY_TABLE2 T2
WHERE %Join(COMMON_KEYS, MY_TABLE1 T1, MY_TABLE2 T2) . . .
This code resolves into:
INSERT INTO PS_MY_TEMP (FIELD1, FIELD2 . . .)
SELECT T2.FIELD1, T2.FIELD2, . . .
FROM PS_MY_TABLE1 T1, PS_MYTABLE2 T2
WHERE T1.FIELD1 = T2.FIELD1
AND T1.FIELD2 = T2.FIELD2 . . .
The following example creates a distinct Select statement.
%InsertSelect(DISTINCT, MY_TABLE, TABLE1, TABLE2 T2)
FROM PS_TABLE1 T1, PS_TABLE2 T2
WHERE %Join(COMMON_KEYS, TABLE1 T1, TABLE2 T2) . . .
This code resolves into:
INSERT INTO PS_MYTABLE (FIELD1, FIELD2 . . .)
SELECT DISTINCT T2.FIELD1, T2.FIELD2, . . .
FROM PS_TABLE1 T1, PS_TABLE2 T2
WHERE T1.FIELD1 = T2.FIELD1
AND T1.FIELD2 = T2.FIELD2 . . .
Syntax
%InsertSelectWithLongs([DISTINCT, ]insert_recname, select_recname [ correlation_id][, select_recname_n [ correlation_id_n]] [, override_field = value]. . .)
Description
The %InsertSelectWithLongs meta-SQL construct generates an Insert statement with a Select statement. It does not generate a From statement. You must specify the select records before you specify override fields.
Use %InsertSelectWithLongs instead of %InsertSelect when the fields in insert_recname include long values (LongChar and Image fields).
Note: %InsertSelectWithLongs has a limit of 99 override fields.
The Insert column list is composed of all the fields in the specified insert_recname.
The corresponding value in the Select list is generated based on the following precedence:
If the Insert fieldname appears as an override_field, the corresponding value is used in the Select list.
If the Insert field name matches a field name in one of the select_recname variables specified, the corresponding Select field is used in the Select list.
The search order of the select_recname records is the order that they are specified in the %InsertSelectWithLongs function.
If the Insert field name has a constant default value defined in Application Designer, that value is used in the Select list.
A default value appropriate for the data type of the Insert field is used (blank for characters, zero for numbers, NULL for Date, Time, and DateTime values, and so on.)
Use the optional override_field variable to specify values for a particular field.
Note: You cannot use bind variables with the override_field.
For each field you specify, the matching logic described in the preceding list is not performed. Instead, the value that you specify after the equal sign is used for that field in the actual Select list. Use this technique to let PeopleTools or Application Engine handle most of the fields in the record, while specifying some of them explicitly. Also, you can use override_field to specify aggregate functions like Sum, Max, and so on.
Note: This meta-SQL is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
DISTINCT |
Specify if the Select statement being generated should contain a Distinct clause. |
insert_recname |
Specify the name of record being inserted into. You must specify a record name, not RECORD. recname, a record name in quotation marks, a bind variable, or a table name. Note: If the record for insert_recname is a temporary table, %InsertSelectWithLongs automatically substitutes the corresponding table instance (PS_TARGETnn instead of PS_TARGET). |
select_recname |
Specify the name of record being selected from. You can specify more than one record. You must specify a record name, not a RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id |
Identify the correlation ID to be used for the select_recname records and fields. |
override_field |
Specify the name of a field on insert_recname that you want to supply a value for (instead of using the value supplied from the select_recname.) |
Value |
Specify the value that should be used for the override_field instead of the value from select_recname. |
Example
Here is a basic example:
%InsertSelectWithLongs(AE_SECTION_TBL, AE_STEP_TBL S, AE_SECTION_TYPE = ' ')
FROM PS_AE_STEP_TBL S, PS_AS_STMT_TBL T
WHERE. . .
The example code resolves into the following:
INSERT INTO PS_AE_SECTION_TBL (AE_APPLID, AE_SECTION,. . ., AE_SECTION_TYPE)
SELECT S.AE_APPL_ID, S.AE_SECTION, . . . ' '
FROM PS_AE_STEP_TBL S, PS_AS_STMT_TBL T
WHERE. . .
In the following example, you have a temporary table, PS_MY_TEMP, which is based on a join between two other tables, PS_MY_TABLE1 and PS_MY_TABLE2:
%InsertSelectWithLongs(MY_TEMP, MY_TABLE1, MY_TABLE2 T2)
FROM PS_MY_TABLE1 T1, PS_MY_TABLE2 T2
WHERE %Join(COMMON_KEYS, MY_TABLE1 T1, MY_TABLE2 T2) . . .
This code resolves into:
INSERT INTO PS_MY_TEMP (FIELD1, FIELD2 . . .)
SELECT T2.FIELD1, T2.FIELD2, . . .
FROM PS_MY_TABLE1 T1, PS_MYTABLE2 T2
WHERE T1.FIELD1 = T2.FIELD1
AND T1.FIELD2 = T2.FIELD2 . . .
The following example creates a distinct Select statement.
%InsertSelectWithLongs(DISTINCT, MY_TABLE, TABLE1, TABLE2 T2)
FROM PS_TABLE1 T1, PS_TABLE2 T2
WHERE %Join(COMMON_KEYS, TABLE1 T1, TABLE2 T2) . . .
This code resolves into:
INSERT INTO PS_MYTABLE (FIELD1, FIELD2 . . .)
SELECT DISTINCT T2.FIELD1, T2.FIELD2, . . .
FROM PS_TABLE1 T1, PS_TABLE2 T2
WHERE T1.FIELD1 = T2.FIELD1
AND T1.FIELD2 = T2.FIELD2 . . .
Syntax
%InsertValues(recname)
Description
The %InsertValues meta-SQL construct produces a comma-separated list of the record's non-null field values. Input processing is applied to the fields in the following ways:
If the field is a Date, a Time, or a DateTime data type, its value is automatically wrapped in %Datein, %TimeIn, or %DateTimeIn, respectively.
If the field is a string, its value is automatically wrapped in quotation marks.
If the field has a null value, it is not included in the list.
Note: This meta-SQL construct can only be used in PeopleCode programs, not in Application Engine SQL actions. Also, this meta-SQL construct is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
recname |
Specify the name of the record to be used for inserting. This can be a bind variable, a record object, or a record name in the form recname. You can't specify a RECORD. recname, a record name in quotation marks, or a table name. |
Example
Here's an example:
SQLExec("Insert into TABLE (%List(NonNull_Fields, :1)) values (%InsertValues(:1))", &Rec);
This example code is expanded into:
"Insert into TABLE (FNUM, FCHAR, FDATE) values (27, 'Y', %datein('1989-11-27'))"
Syntax
%Join({COMMON_KEYS | COMMON_FIELDS}, join_recname [ correlation_id1], to_recname [ correlation_id2] [, override_field_list])
where override_field_list is an arbitrary-length list of fields to be substituted in the resulting text string, in the form:
field1 [, field2]. . .
Description
Use the %Join meta-SQL construct to dynamically build a Where clause joining one table to another. At runtime, the entire construct is replaced with a character string.
Note: This meta-SQL construct is not implemented for COBOL. If date key fields are not marked as required in the record definition for either of the referenced tables in the %Join clause, a Null clause check is added to the date field comparison. This additional clause can have a significant impact on the execution time for the generated SQL statement.
Parameters
Field or Control |
Definition |
---|---|
{COMMON_KEYS | COMMON_FIELDS} |
Use COMMON_KEYS to specify that all common primary key fields are used in constructing a Where clause; use COMMON_FIELDS to specify all common fields, not just key fields. You can select either COMMON_KEYS or COMMON_FIELDS. |
join_recname |
Specify the name of the record to be joined. This can be a bind variable, a record object, or a record name in the form recname. You can't specify a RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id1 |
Identify the correlation ID used to relate the record specified by join_recname and its fields. |
to_recname |
Specify the name of the record to be joined to. This can be a bind variable, a record object, or a record name in the form recname. You can't specify a RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id2 |
Identify the correlation ID used to relate the record specified by to_recname and its fields. |
override_field_list |
Specify a list of fields that you do not want used in the join. For example, if fields A, B, and C were common to two records, and you didn't want to join on C, list C as an override_field. |
Example
Here is an example:
%Join(COMMON_KEYS, PSAESECTDEFN ABC, PSAESTEPDEFN XYZ)
The example code results in the following being generated:
ABC.AE_APPLID = XYZ.AE_APPLID
AND ABC.AE_SECTION = XYZ.AE_SECTION
AND ABC.DBTYPE = XYZ.DBTYPE
AND ABC.EFFDT = XYZ.EFFDT
Here's another example:
%Join(COMMON_FIELDS, PSAEAPPLDEFN ABC, PSAESECTDEFN XYZ)
The second example results in the following being generated:
ABC.AE_APPLID = XYZ.AE_APPLID
AND ABC.DESCR = XYZ.DESCR
However, you do not want to perform the join using the DESCR field because it's a long field. Instead use override_field, as shown in the following code:
%Join(COMMON_FIELDS, PSAEAPPLDEFN ABC, PSAESECTDEFN XYZ, DESCR)
This example results in the following being generated:
ABC.AE_APPLID = XYZ.AE_APPLID
You can also specify a value for a field. Suppose you want to join two tables, but not on the field C3. In addition, you would like to specify a value for C3. Your code could look like the following:
%Join(COMMON_FIELDS, MY_TABLE1 A, MY_TABLE2 B, C3) AND C3 = 'XX'
Syntax
%KeyEqual(recname [ correlation_id])
Description
The %KeyEqual meta-SQL construct expands into a conditional phrase suitable for use in a Where clause.
The conditional phrase consists of a conjunction (AND) of [correlation_id.]keyfieldname = 'keyfieldvalue' phrases for each key field of the given record.
No auto-update processing is done, but other input processing is applied to the values, according to the following:
If the field is a Date, a Time, or a DateTime data type, its value is automatically wrapped in %Datein, %TimeIn, or %DateTimeIn, respectively.
If a value is a string, its value is automatically wrapped in quotation marks.
If a value is NULL, the "=value" part is replaced with "IS NULL".
Note: This meta-SQL can only be used in PeopleCode programs, not in Application Engine SQL actions. Also, this meta-SQL is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
recname |
Specify the name of the record to use for inserting. This can be a bind variable, a record object, or a record name in the form recname. You cannot specify RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id |
Identify the single-letter correlation ID to relate the record specified by recname and its fields. |
Example
Suppose that the record &REC has three keys: FNUM, FDATE, and FSMART. Here is a code example:
Local record &REC;
&REC = CreateRecord(RECORD.MYRECORD);
&REC.FNUM.Value = 27;
&REC.FDATE.Value = %Date;
SQLExec("Delete from MYRECORD A where %KeyEqual(:1 A)", &REC);
This example expands to:
"Delete from TABLE A
where A.FNUM = 27
AND A.FDATE = %Date('1989-11-27')
AND A.FSMART IS NULL"
Syntax
%KeyEqualNoEffDt(recname [ correlation_id])
Description
The %KeyEqualNoEffDt meta-SQL construct expands into a conditional phrase suitable for use in a Where clause.
The conditional phrase consists of a conjunction (AND) of [correlation_id.]keyfieldname = 'keyfieldvalue' phrases for all key fields of the given record, except that it omits any key field named EFFDT.
No auto-update processing is done, but other input processing is applied to the values as follows:
If the field is a Date, a Time, or a DateTime data type, its value is automatically wrapped in %Datein, %TimeIn, or %DateTimeIn, respectively.
If a value is a string, its value is automatically wrapped in quotation marks.
If a value is NULL, the "=value" part is replaced with "IS NULL."
Note: This meta-SQL can only be used in PeopleCode programs, not in Application Engine SQL actions. Also, this meta-SQL is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
recname |
Specify the name of the record to be used for inserting. This can be a bind variable, a record object, or a record name in the form recname. You can't specify RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id |
Identify the single-letter correlation ID to relate the record specified by recname and its fields. |
Example
The EMPL_CHECKLIST record has three keys: EMPLID, CHECK_SEQ, and EFFDT. Here is a code example:
&REC = CreateRecord(EMPL_CHECKLIST);
SQLExec("Delete from TABLE A where %KeyEqualNoEffdt(:1 A)", &REC)
The example expands to:
"Delete from TABLE A
where A.EMPLID = 8001
AND A.CHECK_SEQ = 00001"
Syntax
%Like("Literal")
Description
The %Like construct expands to look for literal values. This meta-SQL should be used when looking for like values. A percent sign character (%) is appended to literal.
Note: This meta-SQL is not implemented for COBOL.
If you're using a bind marker (such as ":1") for the literal argument in a SQLExec, you must wrap the SQL string with the ExpandSqlBinds function. ExpandSqlBinds replaces bind markers with the actual input values.
%Like generates the following:
like 'literal%'
If the literal value contains a backslash character (\) or percent sign (%), then %Like generates the following:
like 'literal%' escape '\'
See ExpandSqlBinds.
Using %Like and Eliminating Blanks
Some platforms require that you use RTRIM to get the correct value. The following characters are wildcards even when preceded with the backslash (\) escape character:
%
_
Therefore, on some platforms, the literal must end with a percent sign (%) wildcard that isn't preceded by a backslash (\). Here are some examples:
literal = 'ABC%'
There is no need for RTRIM on any platform.
literal = 'ABC\%'
You need RTRIM on Microsoft SQL Server and DB2.
Using %Like and Trailing Blanks
Not all executions of %Like perform the same. When dealing with trailing blanks, some platforms behave as if there is an implicit percent sign (%) at the end of the comparison string, while most do not.
In the following example, if the selected column contains the string "ABCD " (with three trailing blanks. The statement may or may not return any rows:
select * from t1 Where c like 'ABCD'
Therefore, it is always important to explicitly code the percent sign (%) the end of matching strings for columns where you want to include trailing blanks. The following table shows the use of implicit percent signs with specific databases:
Database |
Includes Implicit Percent Sign (%) |
---|---|
PeopleSoft Standard Usage |
Yes |
DB2/400 |
No |
DB2/MVS |
No |
DB2/Unix |
No |
Microsoft SQL Server |
Yes |
Oracle |
No |
SQLBase |
No |
Using %Like and Wildcards
SQL specifies two wildcards that can be used when specifying pattern matching strings for use with the SQL Like predicate. The underscore is used as a substitution for a single character within a string, and the percent sign represents any number of character spaces within a string. All supported databases use these characters as wildcards.
Parameters
Field or Control |
Definition |
---|---|
literal |
Specify the value to search for. |
Syntax
%LikeExact(fieldname, "Literal")
Description
The %LikeExact meta-SQL variable expands to look for literal values. Use this variable when exact matches are necessary, taking into account wildcards in the literal values.
Note: This meta-SQL is not implemented for COBOL.
%LikeExact generates one of the following:
If the literal contains no wildcards:
fieldname = 'literal'
If the literal ends with the '%' wildcard:
fieldname like 'literal' [escape '\']
Some platforms require that you use RTRIM to get the correct value. The following characters are wildcards even when preceded with the backslash (\) escape character.
%
_
Therefore, on some platforms, the literal must end with a percent sign (%) wildcard that isn't preceded by a backslash (\). Here are some examples:
literal = 'ABC%'
You do not need RTRIM on any platform.
literal = 'ABC\%'
You need RTRIM on Microsoft SQL Server and DB2.
Considerations Using Bind Markers
If you're using a bind marker (such as ":1") for the literal argument in a SQLExec, you must wrap the SQL string with ExpandSqlBinds. ExpandSqlBinds replaces bind markers with the actual input values.
The following forms work:
Application Engine SQL action (with or without the ReUse property enabled).
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LIKEEXACT(AE_APPL_ID, %Bind(AE_APPL_ID, STATIC))
The STATIC modifier is only required if the ReUse property is enabled, but you can always use it.
PeopleCode.
AE_TESTAPPL_AET.AE_APPL_ID = "AB\_C";
SQLExec("UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LIKEEXACT(AE_APPL_ID, :AE_TESTAPPL_AET.AE_APPL_ID)");
Here is another acceptable form:
SQLExec(ExpandSqlBinds("UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LikeExact(AE_APPL_ID, :1)", "AB\_C"));
This form does not work:
SQLExec("UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LIKEEXACT(AE_APPL_ID, :1)", "AB\_C");
Related Links
Parameters
Field or Control |
Definition |
---|---|
fieldname |
Specify a field to be used in the first part of the Like comparison. |
literal |
Specify the value to search for. |
Example
Here is an example:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LIKEEXACT(AE_APPL_ID, 'ABC')
The example resolves into the following:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE AE_APPL_ID = 'ABC'
Here is an example:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LIKEEXACT(AE_APPL_ID, 'AB%C')
The example resolves into the following:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE RTRIM(AE_APPL_ID) LIKE 'AB%C'
Here is an example:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE LIKEEXACT(AE_APPL_ID, 'AB%C%')
The example resolves into the following:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE AE_APPL_ID LIKE 'AB%C%'
Here is an example:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE %LIKEEXACT(AE_APPL_ID, 'AB%C% ')
The example resolves into the following:
UPDATE PS_AE_APPL_TMP SET AE_PRODUCT = 'X' WHERE AE_APPL_ID LIKE 'AB%C% '
The following example shows using ExpandSqlBinds:
SQLExec(ExpandSqlBinds("SELECT COUNT(*) FROM PS_ITEM WHERE %LIKEEXACT(BUSINESS_UNIT, :1)", "M04"), %COUNT);
Syntax
%Mod(a, b)
Description
Use the %Mod meta-SQL function to return the remainder (or modulo) of division of one number by another number. %Mod uses the integer portion of both the dividend and the divisor. If the divisor is 0, %Mod returns the dividend value.
Parameters
Field or Control |
Definition |
---|---|
a |
Specifies the dividend as a number. |
b |
Specifies the divisor as a number. |
Example
Each of the following examples shows the computed result of the %Mod function:
%Mod(10, 3) = 1
%Mod(9, 3) = 0
%Mod(10.1, 3) = 1
%Mod(-10, 3) = -1
%Mod(10, 0)= 10
Syntax
%NoUppercase
Description
When processing a SQL statement, the system automatically casts all field names and possibly record names to uppercase when processing a SQL statement. When processing records from a third party, fields that are lowercase are cast into uppercase, which can create a runtime issue on case-sensitive platforms.
To prevent this, use the %NoUppercase meta-SQL statement at the beginning of the SQL statement.
Parameters
None.
Note there are not parameters, as well as no parenthesis, for this meta-SQL.
Returns
None.
Example
%NoUppercase
INSERT INTO PS_RM_APP_ENG_LOG (MAP_ID
, RECNAME
, FIELDNAME
, MESSAGE_SET_NBR
, MESSAGE_NBR
, LANGUAGE_CD)
SELECT %Bind(MAP_ID)
, %Bind(RECNAME)
, ' '
,17834
, 1116
, %Bind(LANGUAGE_CD)
FROM %SelectDummyTable
WHERE EXISTS (
SELECT 'X'
FROM SW_OPPORTUNITY SW_OPPORTUNITY
, SW_PERSON SW_PERSON
, SW_CUSTOMER SW_CUSTOMER
, SW_SALES_TEAM_VW SW_SALES_TEAM_VW
WHERE SW_OPPORTUNITY.SWCUSTOMERID = SW_CUSTOMER.SWCUSTOMERID
AND SW_OPPORTUNITY.SWSALESTEAMID = SW_SALES_TEAM_VW.SWPROVIDERGRPID
AND SW_SALES_TEAM_VW.SWPERSONID = SW_PERSON.SWPERSONID
GROUP BY SW_OPPORTUNITY.SwOpportunityId
HAVING COUNT(*) > 1)
Syntax
%NumToChar(Number)
Description
Use the %NumToChar construct to transform a numeric value into a character value. Spaces are trimmed from Number.
Note: %NumToChar will preserve all trailing zeroes. Therefore, use the scale parameter of %Cast to specify the number of trailing zeroes.
Parameters
Field or Control |
Definition |
---|---|
Number |
Specify the number to convert to a character value. Signed numbers, as well as decimals, are acceptable. |
Syntax
%OldKeyEqual(recname [correlation_id])
Description
The %OldKeyEqual meta-SQL construct is similar to the %KeyEqual construct, except that it uses the original values of the record fields, rather than the current values. Since the rules for which values are original and which are current are not very clear, especially for standalone record objects, avoid using this meta-SQL construct. You should use separate records to hold previous values. This can make your code clearer and more maintainable.
Note: This meta-SQL construct can only be used in PeopleCode programs, not in Application Engine SQL actions. Also, this meta-SQL is not implemented for COBOL.
Description
The %OPRCLAUSE meta variable is used in the view text of dynamic views.
To support the concept of a specific row-level security class, this meta variable fills in the WHERE clause with the value from PSOPRDEFN.OPRID, PSOPRDEFN.OPRCLASS, or PSOPRDEFN.ROWSECCLASS depending which is present in the SELECT clause.
%OPRCLAUSE must be either all uppercase or all lowercase.
%OPRCLAUSE translates to OprId, OprClass or RowSecClass, following the same rules used for security on search dialog boxes. If OPRID is in the view, %OPRCLAUSE expands to OPRID = 'current operator'. If OPRCLASS is in the view, %OPRCLAUSE expands to OPRCLASS = 'primary permission list'. If ROWSECCLASS is in the view, %OPRCLAUSE expands to ROWSECCLASS = 'row security permission list'.
Example
Here is an example:
SELECT EMPLID, ABSENCE_TYPE, OPRID FROM PS_ABSENCE_HIST WHERE %OPRCLAUSE
AND (EMPLID='8001' AND ABSENCE_TYPE='CNF')
This code expands to:
SELECT EMPLID, ABSENCE_TYPE, OPRID FROM PS_ABSENCE_HIST WHERE ( OPRID 'PTDMO')
AND (EMPLID='8001' AND ABSENCE_TYPE='CNF')
Here's another example:
SELECT EMPLID, ABSENCE_TYPE, OPRCLASS FROM PS_ABSENCE_HIST WHERE %OPRCLAUSE AND
(EMPLID='8001' AND ABSENCE_TYPE='CNF')
This code expands to:
SELECT EMPLID, ABSENCE_TYPE, OPRCLASS FROM PS_ABSENCE_HIST WHERE ( OPRCLASS ='ALLPANLS')
AND (EMPLID='8001' AND ABSENCE_TYPE='CNF')
Syntax
%Round(expression, factor)
Description
%Round rounds an expression to a specified scale before or after the decimal point. If factor is a literal, it can be rounded to a negative number.
Parameters
Field or Control |
Definition |
---|---|
expression |
Specify an arbitrary numeric expression involving numeric constants and database columns. |
factor |
Specify an integer or bind variable in SQLExec PeopleCode. The range of a factor is from -31 to +31 for literals. Non-literals can only be positive. |
Example
Here is an example:
%Round(10.337, 2) = 10.34
%Round(13.67, 0) = 14
SQLExec("SELECT %Round(field_c1, :1) from RECORD_T", field_c2, &Result);
In the example, field_c1 and field_c2 are two fields in the record.
The following cases are illegal, and may cause incorrect results or runtime SQL errors:
%Round(10.337, 2 + 1) (factor can not be an expression)
%Round(field_c1, field_c2) (factor can not be database columns)
Syntax
%SelectByRowNum(:num1 [prefix] [[wherestring] [orderbystring]], :num_x, :num_x+1)
Description
%SelectByRowNum is shorthand for selecting the fields in the specified record by the specified row's number scope, wrapping datetime fields with %DateOut, %TimeOut, and so on.
The pseudocode looks like this:
Select (AllFields, :num1 correlation_id) from (Select ROW_NUMBER() OVER( orderbystring) AS ROW_NUM, (AllFields, :num1 correlation_id) FROM %Table(:num1) wherestring) Where ROW_NUM >= :num_x AND ROW_NUM <= :num_x+1
Example
Local SQL &SQL_OBJ;
&SQL_OBJ = CreateSQL("%SelectByRowNum(:1 FILL where FILL.CLASSID = :2 order by FILL.CLASSID, :3, :4)", Record.PSAUTHOPTN, "PTMSF_CLIENT_USER", 1, 5);
&SQL_OBJ.Close();
Description
Use the %SelectDummyTable variable to perform a SELECT without specifying a specific table. The database platform-specific “dummy table” is substituted in the SELECT.
Example
Before: In the following example, the SELECT was performed on the one-row PeopleTools installation table.
SELECT 'x'
FROM PS_INSTALLATION WHERE ...
After: Using the %SelectNoTable variable ensures that the SQL will not fail if the table does not exist or if the table contains more than one row.
SELECT 'x'
FROM %SelectDummyTable WHERE ...
Before: In the following example, %SelectInit is used to initialize files in an Application Engine state record.
%SelectInit(GL_JP_AET.PROCESS_STATUS, GL_JP_AET.PROCESS_ORIG, GL_LOG_MSG_AET.MESSAGE_SET_NBR, GL_LOG_MSG_AET.MESSAGE_NBR, GL_LOG_MSG_AET.MESSAGE_PARM1, GL_LOG_MSG_AET.MESSAGE_PARM2, GL_LOG_MSG_AET.MESSAGE_PARM3)
SELECT 'P'
, 'P'
, 5830
, 4
, TO_CHAR(1)
, 'DVP1'
, 'EK'
FROM PS_INSTALLATION
After: Using the %SelectNoTable variable ensures that the SQL will not fail if the table does not exist or if the table contains more than one row.
%SelectInit(GL_JP_AET.PROCESS_STATUS, GL_JP_AET.PROCESS_ORIG, GL_LOG_MSG_AET.MESSAGE_SET_NBR, GL_LOG_MSG_AET.MESSAGE_NBR, GL_LOG_MSG_AET.MESSAGE_PARM1, GL_LOG_MSG_AET.MESSAGE_PARM2, GL_LOG_MSG_AET.MESSAGE_PARM3)
SELECT 'P'
, 'P'
, 5830
, 4
, TO_CHAR(1)
, 'DVP1'
, 'EK'
FROM %SelectDummyTable
Syntax
%SQL(SQL_ID [, paramlist])
where paramlist is a list of arguments that are used for dynamic substitutions at runtime, in the form:
arg1 [, arg2]. . .
Description
Use the %SQL construct for common SQL fragments that you have already defined and want to reuse, substituting additional values dynamically. SQL_ID is the name of a SQL definition created using either Application Designer or the StoreSQL function.
You can only nest up to 10 %SQL statements at a time.
Note: This meta-SQL construct is not implemented for COBOL. A SQL definition is not the same as the SQL object that is instantiated from the SQL class at runtime. A SQL definition is created either using Application Designer at design time, or using the StoreSQL function. A SQL object is instantiated at runtime from the SQL class, and has methods and properties associated with it like any other object.
When a specified SQL definition has more than one version, the database type always takes precedence.
If one or more versions of a SQL definition are found for the database type of the current database connection, and if any of the versions have an effective date less than or equal to the value returned for %AsOfDate, the most recent version is used.
If no versions are found for the current database type, or if all of the versions have effective dates greater than the value returned for %AsOfDate, the system looks for an effective version of the SQL definition under the database type Generic.
If no version is found, an error occurs.
See Using the SQL Editor.
Application Engine Considerations
Application Engine programs use the current date to compare with the effective date, not the date returned by %AsOfDate.
Special SQL Characters
The following meta-SQL variables can be used as part of the %SQL construct to represent special characters as SQL parameters.
Meta-SQL Variable |
Description |
---|---|
%Comma |
Represents a single comma. |
%LeftParen |
Allows you to pass a left parenthesis character to a %P() variable, without closing the SQL object. |
%RightParen |
Allows you to pass a right parenthesis character to a %P() variable, without closing the SQL object. |
%Space |
Represents a space. |
Parameters
Field or Control |
Definition |
---|---|
SQL_ID |
Specify the name of an existing SQL definition. |
paramlist |
Specify a list of arguments for dynamic substitutions at runtime. The first argument replaces all occurrences of %P(1) in the referenced SQL definition, the second argument replaces %P(2), and so forth. You can specify up to 99 arguments. Note: For PeopleCode, the
%P should not be contained in quotation marks. |
Example
In the following example, the SQL definition MY_SQL was created in Application Designer to be the following:
%P(1).EFFDT = (SELECT MAX(EFFDT) FROM ...)
In the following example, the %SQL statement is dynamically generated:
UPDATE PS_TEMP
SET ...
WHERE ...
AND %SQL(MY_SQL, PS_TEMP)
The previous example resolves to the following:
UPDATE PS_TEMP
SET ...
WHERE ...
AND PS_TEMP.EFFDT = (SELECT MAX(EFFDT) FROM ...)
Syntax
%SqlHint(SQL_cmd, index, hint_text, DB_platform [, {ENABLE | DISABLE}])
Description
Use the %SqlHint function to insert a database platform-specific SQL hint into the specified SQL statement. The hint is inserted immediately after the SQL command specified by the SQL_cmd parameter.
This meta-SQL function is ignored in any of the following circumstances:
The current database connection does not match the DB_platform parameter.
The DB_platform parameter is not specified as ORACLE. (This is a limitation of the current release.)
The nth occurrence of the SQL command specified by SQL_cmd and index does not exist in the current SQL statement.
Parameters
Field or Control |
Definition |
---|---|
SQL_cmd |
Specifies the SQL command that will use the hint as one of the following literal constants:
|
index |
Specifies which occurrence of the SQL command will use the hint as an Integer value from 1 to 99. |
hint_text |
Specifies the SQL hint as a String value enclosed in single quotes. The hint can include other meta-SQL, such as %Table. |
DB_platform |
Specifies the database platform for which the hint is valid as one of the following literal constants:
Note: Currently, ORACLE is the only supported platform. This meta-SQL function is ignored for all other platforms. |
ENABLE | DISABLE |
Specifies whether to enable or disable the hint as a literal constant. Note: ENABLE is the default value for this optional parameter. |
Example 1
Before: The following example includes an Oracle-specific SQL hint to be inserted after the first SELECT of the SQL statement:
%SqlHint(SELECT, 1, '/*+ FIRST_ROWS(10) */', ORACLE)
SELECT EMPLID
FROM PS_JOB
After: For an Oracle connection, this meta-SQL would expand to:
SELECT '/*+ FIRST_ROWS(10) */' EMPLID
FROM PS_JOB
After: On all other connections, this meta-SQL would expand to:
SELECT EMPLID
FROM PS_JOB
Example 2
Before: In the following example, %SqlHint functions will be expanded and applied after all other meta-SQL expansion has occurred. In this example, the APPEND hint will be applied to the first INSERT found in this SQL statement. The LEADING hint will be applied to the first SELECT found in this SQL statement.
%SqlHint(INSERT, 1, '/*+ APPEND*/', ORACLE, ENABLE ),%SqlHint(SELECT, 1, '/*+ LEADING(H) INDEX(L, PSFJRNL_LN) */', ORACLE, ENABLE) %InsertSelect(JRNL_LIU_TAO, JRNL_LN L, BUSINESS_UNIT_IU=H.BUSINESS_UNIT_IU, LEDGER_GROUP=H.LEDGER_GROUP, IU_SYS_TRAN_CD=H.IU_SYS_TRAN_CD, IU_TRAN_CD=H.IU_TRAN_CD, PROCESS_INSTANCE=%Bind(PROCESS_INSTANCE))
FROM %Table(JRNL_HIU_TAO) H, PS_%Bind(GL_JEDIT_WK_AET.RECNAME_JRNL_LN,NOQUOTES) L
WHERE H.PROCESS_INSTANCE=%Bind(PROCESS_INSTANCE)
AND H.BUSINESS_UNIT=L.BUSINESS_UNIT
AND H.JOURNAL_ID=L.JOURNAL_ID
AND H.JOURNAL_DATE=L.JOURNAL_DATE
AND H.UNPOST_SEQ=L.UNPOST_SEQ;
After: The SQL statement after all meta-SQL expansion and hint insertion:
INSERT /*+ APPEND */ INTO PS_JRNL_LIU_TAO5 (BUSINESS_UNIT , JOURNAL_ID , JOURNAL_DATE
/* For the purposes of clarity, many columns in this column list have been omitted from this example. */
, DEPTID , SCENARIO , BUSINESS_UNIT_IU)
SELECT /*+ LEADING(H) INDEX(L, PSFJRNL_LN) */ L.BUSINESS_UNIT
, L.JOURNAL_ID
, L.JOURNAL_DATE
/* For the purposes of clarity, many columns in this column list have been omitted from this example. */
,L.DEPTID
,L.SCENARIO
, H.BUSINESS_UNIT_IU
FROM PS_JRNL_HIU_TAO5 H
, PS_%Bind(GL_JEDIT_WK_AET.RECNAME_JRNL_LN,NOQUOTES) L
WHERE H.PROCESS_INSTANCE=%Bind(PROCESS_INSTANCE)
AND H.BUSINESS_UNIT=L.BUSINESS_UNIT
AND H.JOURNAL_ID=L.JOURNAL_ID
AND H.JOURNAL_DATE=L.JOURNAL_DATE
AND H.UNPOST_SEQ=L.UNPOST_SEQ ;
Syntax
%Substring(source_str, start, length)
Description
%Substring expands to a substring of source_str.
Parameters
Field or Control |
Definition |
---|---|
source_str |
Specify the source string. |
start |
Specify the substring's beginning position. The first character of source_str is position 1. |
length |
Specify the length of the substring. |
Syntax
%SUBREC(subrec_name, corel_name)
Description
%SUBREC is used only in dynamic view SQL, where it expands to the columns of a subrecord. You can't use this statement in SQLExec or any other SQL statement.
Note: %SUBREC must be either all uppercase or all lowercase.
Parameters
Field or Control |
Definition |
---|---|
subrec_name |
Specify the name of the subrecord. |
corel_name |
Specify the correlation name. |
Example
Suppose you have a record definition AAA_VW that is a dynamic view, with fields CHR, SUB, and NUM. The field SUB is a subrecord with fields CHR_SUB, NUM_SUB, and IMG_SUB. The view text for AAA_VW could be:
"select a.chr, %subrec(sub,a), a.num from ps_aaa a"
The Create View SQL generated by this view text would be:
"CREATE VIEW SYSADM.PS_AAA_VW (CHR, CHR_SUB, NUM_SUB, IMG_SUB, NUM) AS SELECT A.CHR, A.CHR_SUB, A.NUM_SUB, A.IMG_SUB, A.NUM FROM PS_AAA A"
Syntax
%Table(recname [, instance])
Description
The %Table construct returns the SQL table name for the record specified with recname.
For example, %Table(ABSENCE_HIST) returns PS_ABSENCE_HIST.
Note: This meta-SQL is not implemented for COBOL.
If the record is a temporary table and the current process has a temporary table instance number assigned, %Table resolves to that instance of the temporary table (that is, PS_ABSENCE_HISTInstance Number).
You can override this
value with the instance parameter. For example, if you know you want the
third instance of a temporary table, you could specify it with %Table(&MYREC, 3).
You can use the SetTempTableInstance function to set the instance
of a temporary table that is used with %Table.
This construct can be used to specify temporary tables for running parallel Application Engine processes.
Parameters
Field or Control |
Definition |
---|---|
recname |
Identify the record that the table name is drawn from. This can be a bind variable, a record object, or a record name in the form recname. You cannot specify RECORD. recname, a record name in quotation marks, or a table name. |
instance |
Specify the instance of the temporary table to be used. |
Example
The following function deletes records based on two other fields:
Function delete_draft_type(&RECNAME)
&SQL = "Delete from %Table(:1) where " | FIELD.SETID | " =
:2 and " | FIELD.DRAFT_TYPE | " = :3";
SQLExec(&SQL, @("RECORD." | &RECNAME), SETID, DRAFT_TYPE);
End-Function;
Syntax
%Test(Prefix, Test, Suffix)
Description
The %Test construct can be used with records that have no key values.
Parameters
Field or Control |
Definition |
---|---|
Prefix |
Specify a string that is conditionally added before the expansion of the test string. You cannot use meta-SQL in this parameter. |
Test |
Specify a meta-SQL string to be expanded. |
Suffix |
Specify a string that is conditionally added at the end of the test string. You can use meta-SQL in this parameter. |
Returns
If the expansion of Test produces only a blank (or empty) string, the entire %Test meta-SQL construct is replaced with an empty string. Otherwise, the %Test meta-SQL construct is replaced by the prefix, then the expansion of Test, and then the suffix.
Example
The following meta-SQL generates valid SQL even when the given record has no keys:
%SelectAll(:1) %Test(WHERE ,%KeyEqual(:1));
Syntax
%TextIn(BindVariable)
Description
%TextIn construct, when used with a bind variable, allows the insertion and updating of a text string into a LongChar field (column).
This construct is mandatory for any LongChar field insertion or update to be compatible on all database platforms on which it is supported.
Parameters
Field or Control |
Definition |
---|---|
BindVariable |
Specify a bind variable. |
Example
In the following example, :1 is a bind variable in PeopleCode:
&String1 = "This is a test."
SqlExec("INSERT INTO PS_TABLE1 (STMTID, SQLSTMT) VALUES (1, %TextIn(:1))", &String1)
Syntax
%TimeAdd(datetime, add-minutes)
Description
This construct generates the SQL that adds add-minutes (a positive or negative integer literal or expression, provided that the expression resolves to a data type that can be used in datetime arithmetic for the given RDBMS) to the provided datetime (which can be a datetime literal or expression).
Note: On some platforms, you can use time-value in place of datetime. However, this can give a SQL error on other platforms. This meta-SQL construct is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
time |
Specify a Time or DateTime value to add more time to. |
add-minutes |
Specify the number of minutes to add to time. This must be a numeric value or an expression that resolves to a numeric value. |
Example
SELECT %TimeAdd(%CurrentTimeIn, 60) FROM %SelectNoTable
Syntax
%TimeIn(tm)
Description
%TimeIn expands to platform-specific SQL for a Time value in the Where clause of a SQL Select or Update statement, or when a time value is passed in an Insert statement.
Restrictions Using COBOL
You can only use string literals when using this construct in COBOL. You cannot use it with bind parameters in COBOL. For example, the following works in COBOL:
UPDATE PS_PERSONAL_DATA SET LASTUPTM = %TIMEIN('11:59:00:000000')
The following SQL fails:
UPDATE PS_PERSONAL_DATA SET LASTUPTM = %TIMEIN(:1)
Parameters
Field or Control |
Definition |
---|---|
tm |
Specify a Time bind variable or a string literal in the form hh.mm.ss.ssssss. |
Syntax
%TimeNull
Description
Use this meta-SQL to specify a null value for a time field. Only use this meta-SQL in Insert or Update statements. Do not use this meta-SQL in a Where clause.
Note: This meta-SQL is not implemented for COBOL.
This meta-SQL resolves into a database-specific SQL substring, as shown in the following table:
Database |
Resolved Substring |
---|---|
DB2 |
NULLIF(CURRENT TIME, CURRENT TIME) |
All others |
NULL |
Parameters
None.
Syntax
%TimeOut(time_col)
Description
The %TimeOut meta-SQL variable expands to either a platform-specific SQL substring or datetime value, depending on the database platform, representing the time_col column in the Select clause of a SQL query.
Parameters
Field or Control |
Definition |
---|---|
time_col |
Specify a time column. |
Syntax
%TimePart(DTTM_Column)
Description
%TimePart returns the time portion of the specified datetime column.
Note: This meta-SQL is not implemented for COBOL.
Considerations Using %TimePart
Use %TimeOut meta-SQL when fetching from the database:
%TimeOut(%TimePart(DTTM_COLUMN)) from some_table
If a literal is used as the parameter to %TimePart, it must be wrapped in %DateTimeIn as shown in the following:
insert into some_table values(%TimePart(%DateTimeIn('2001-01-01-12.34.56.789012')))
Parameters
Field or Control |
Definition |
---|---|
DTTM_Column |
Specify the datetime column to return the time for. |
Syntax
%TrimSubstr(source_str, start, length)
Description
%TrimSubstr, like %Substring, expands to a substring of source_str, except that trailing blanks are removed from the substring.
Note: If you trim a string
of blanks, an empty string is returned on all database platforms except
Oracle, when a Null is returned. If a Null result is not acceptable,
such as when using the result as a value to insert into a non-nullable
column, you can turn the Null into a single blank using the %COALESCE
meta-SQL with %TrimSubstr, for example: %COALESCE( %TrimSubstr(
<expression>), ' ')
Parameters
Field or Control |
Definition |
---|---|
source_str |
Specify the source string. |
start |
Specify the substring's beginning position. The first character of source_str is position 1. |
length |
Specify the length of the substring. |
Syntax
%Truncate(expression, factor)
Description
%Truncate truncates an expression to a specified scale before or after the decimal point.
Considerations Using %Truncate
You may get incorrect results or runtime SQL errors if you try to use an expression for factor. The following code example produces incorrect results:
%Truncate(10.337, 2 + 1)
Parameters
Field or Control |
Definition |
---|---|
Expression |
Specify an expression involving numeric constants and database columns. |
Factor |
Specify an integer or bind variable in SQLExec PeopleCode. The range of a factor is -30 to +31. A negative number truncates to left of the decimal point. |
Example
Here is an example:
%Truncate(10.337, 2) = 10.33
%Truncate(13.37, 0) = 13
%Truncate(19.337, -1) = 10
SQLExec("SELECT %Truncate(field_c1, :1) from RECORD_T", field_c2, &Result);
In the example, field_c1 and field_c2 are two fields in the record.
Syntax
%TruncateTable(table_name)
Description
%TruncateTable deletes all the rows in a table.
Note: You must use a table name, not a record name, with this statement.
On all databases, the
use of %TruncateTable causes an implicit commit. The rows deleted
by this command, and any other pending database updates, are all committed.
To postpone the commit until subsequent database updates have been
successfully completed, use the SQL statement DELETE FROM table_name
or the statement IMPORT REPLACE WITH NULL
instead of %TruncateTable(table_name). The
advantage of using %TruncateTable is that its execution is faster
than either of the SQL statements. %TruncateTable is often used for
removing rows from a work table or a temporary table.
If you're calling %TruncateTable from an Application Engine program step, you should commit after the step that immediately precedes the step containing the %TruncateTable statement. Also, do not use %TruncateTable on a step that is executed multiple times within a loop. In general, it's best to use this construct early in your Application Engine program as an initialization task. In addition, avoid using this meta-SQL when your Application Engine program is started from the CallAppEngine function.
If a commit is not possible, Application Engine replaces the meta-SQL with a Delete From string. This ensures restart integrity when your program runs against a database where there is an implicit commit associated with Truncate Table or where rollback data is not logged.
For databases that either execute an implicit commit for %TruncateTable or require a commit before or after this meta-SQL, replace %TruncateTable with an unconditional delete in certain circumstances.
Example
If you use %TruncateTable with %Table, you must specify the full name of the table. For example:
%TruncateTable(%Table(BAS_ELIG_DBGFLD))
The following is a code example:
%TruncateTable(PS_TEMP_TABLE)
Syntax
%UpdatePairs(recname [correlation_id])
Description
The %UpdatePairs construct produces a comma-separated list of fieldname = 'fieldvalue' phrases for each changed field of the given record. Input processing is applied to the values in the following ways:
If the field is a Date, a Time, or a DateTime value, its value is automatically wrapped in %Datein, %TimeIn, or %DateTimeIn, respectively.
If the field is a string, its value is automatically wrapped in quotes.
If the field has a null value, NULL is the given value.
Note: This meta-SQL construct can only be used in PeopleCode programs, not in Application Engine SQL actions. Also, this meta-SQL construct is not implemented for COBOL.
Parameters
Field or Control |
Definition |
---|---|
recname |
Specify the name of the record to use for updating. This can be a bind variable, a record object, or a record name in the form recname. You can't specify RECORD. recname, a record name in quotation marks, or a table name. |
correlation_id |
Identify the single-letter correlation ID to relate the record specified by recname and its fields. |
Example
Suppose that the record &REC has one key: FNUM, and the FCHAR field has changed. Here is an example:
Local record &REC;
&REC = CreateRecord(RECORD.MYRECORD);
&REC.FNUM.Value = 27;
&REC.FCHAR.Value = 'Y';
SQLExec("Update TABLE set %UpdatePairs(:1) where %KeyEqual(:1)", &REC)
The example expands to:
"Update TABLE set FCHAR = 'Y' where FNUM = 27"
The following example updates all the fields on a base record (&REC) that are not also fields on the related language record (&REC_RELATED_LANG). It creates a holding record (&REC_TEMP), copies the fields to update from the base record to the holding record, and then uses the holding record for the update.
&UPDATE = CreateSQL("Update %Table(:1) set %UpdatePairs(:1) Where %KeyEqual(:2)");
&REC_TEMP = CreateRecord(@("RECORD." | &REC.Name));
&FIELD_LIST_ARRAY = CreateArray();
For &I = 1 to &REC_RELATED_LANG.FieldCount
&FIELD_LIST_ARRAY.Push(&REC_RELATED_LANG.GetField(&I).Name);
End-For;
For &I = 1 to &REC.FieldCount
If &FIELD_LIST_ARRAY.Find(&REC.GetField(&I).Name) = 0 then
&REC_TEMP.GetField(&I).Value = &REC.GetField(&I).Value;
End-If;
End-For;
&UPDATE.Execute(&REC_TEMP, &REC);
Syntax
%Upper(charstring)
Description
The %Upper construct converts the string charstring to uppercase. You can use wildcards with charstring, such as the percent sign (%).
Note: This meta-SQL construct is not implemented for COBOL.
Considerations with COBOL and Unicode
COBOL's uppercase function is not Unicode-aware, and corrupts Unicode data. To use an uppercase function with COBOL, use the function supplied with PeopleTools called PTPUPPER.
The syntax to call PTPUPPER is:
CALL 'PTPUPPER' USING SQLRT
<any PIC S9(4) COMP field that contains the fields
defined length (non-unicode)>
<the String field - max PIC X(8192).>
The following is an example from Unicode-expanded source code:
01 W-WORK.
02 W-DESCR PIC X(90) VALUE SPACES.
02 W-SIZE PIC S9(4) COMP VALUE +30.
CALL 'PTPUPPER' USING SQLRT
W-SIZE OF W-WORK
W-DESCR OF W-WORK
Parameters
Field or Control |
Definition |
---|---|
charstring |
Specify the string to convert to uppercase. |
Example
SELECT EMPLID, NAME FROM PS_EMPLOYEES WHERE %UPPER(NAME) LIKE %UPPER(sch%)
Syntax
%UuidGen()
Description
Use the %UuidGen function in a SQL Insert or Update statement to generate a universally unique identifier (UUID) as a globally unique 36-character string.
%UuidGen can only be used in an Insert or Update statement. You will get an error if you use the function in any other type of SQL.
Syntax
%UuidGenBase64()
Description
Use the %UuidGenBase64 function in a SQL Insert or Update statement to generate a universally unique identifier (UUID) as a globally unique 24-character base64 string.
%UuidGenBase64 can only be used in an Insert or Update statement. You will get an error if you use the function in any other type of SQL.