Connection Status elements

The Connection Status page displays information in a multi-pane format. This table describes elements on the Connection Status page.

Table 4-1 Connection Status Top Pane View Grid Columns

Field Name	Description
Server Name	Name of the local MP server.
Automatic Connections Count	x of y in Service x = Number of Automatic Connections that are InService or Degraded y = Total number of Automatic Connections
Configured Connections Count	x of y in Service x = Number of Configured Connections that are InService or Degraded y = Total number of Configured Connections

A report can be generated for any server on the Overall tab as described in Connection Status Report section.

When a server is selected from the top pane, associated peer servers are shown in the bottom pane as described in Table 4-2.

Table 4-2 Connection Status Bottom Pane View Grid Columns

Field Name	Description
Peer Server Name	All servers – local and remote – that have connections to this server are listed.
Peer Server IP Address	The IP address of the peer server that displays may be IPv4 or IPv6 based on the established connection.
Connection Status	Down – Connection is down. Forming – Connection attempt has been made. Aligning – Connection Alignment is in progress. LocallyBlocked – Connection is locally blocked. RemotelyBlocked – Connection is blocked at remote side. TotallyBlocked – Connection is locally as well as remotely blocked. InService – Connection is InService and available to send user traffic. Degraded – Connection is available to send user traffic but is congested.
Admin Connection State	Report – Enabled when a server is selected in the top pane. Select between a Summary report and a Detailed report.
	Buttons are enabled when a peer server is selected in the bottom pane. Enabled – The administrator has enabled this connection. This is the default value. Disabled – The administrator has disabled this connection. System does not try to establish this connection. Blocked – Connections in Blocked state do not exchange Communication Agent messages.
Connection Type	The type of connection to this server. Auto – This is an automatic connection. Configured – This is a connection to a configured Remote server.
Date Last Updated	Time when the connection status was last updated.