Diameter Traffic Throttle Point elements

Table 3-32 describes the fields on the Traffic Throttle Points View, Insert, and Edit pages. Data Input Notes apply only to the Insert and Edit pages; the View page is read-only.

Table 3-32 Traffic Throttle Point Elements

Field (* indicates a required field)	Description	Data Input Notes
* Name	The name of the Traffic Throttle Point.	Format: case-sensitive; alphanumeric and underscore Range: 1 - 32 characters; cannot start with a digit and must contain at least one alpha Default: NA
* Peer Node	The Egress Peer associated with this Diameter Application ID and Traffic Throttle Point.	Format: List Range: 1 - 32 characters; cannot start with a digit and must contain at least one alpha Default: NA
* Application ID	The Diameter Application ID associated with this Traffic Throttle Point.	Format: List Range: 1 - 32 characters; cannot start with a digit and must contain at least one alpha Default: NA
TTP Configuration Set	The Traffic Throttle Point Configuration Set that is associated with this Traffic Throttle Point.	Format: List Range: 1 - 32 characters; cannot start with a digit and must contain at least one alpha Default: NA
* Max Loss Percent Threshold	The rate loss threshold where if the current percent loss is greater than or equal to this value, requests should not route to this Traffic Throttle Point and should be diverted or discarded instead.	Format: text box Range: 1 - 100 Default: 100%
Alternate Implicit Route	Optional Route List to use for routing messages to this Peer when implicit routing is invoked and the primary route to the Peer is unavailable.	Format: List Range: 1 - 100 Default: 100%
* Max ETR	The maximum allowed Egress Transaction Rate for this TTP.	Format: text box Range: 100 - 250000 Default: 6000