Place the SDS SOAM VM into the SOAM Server Group

1. In the SDS NOAM VIP, log in to the NOAM VIP address. Open an approved Web browser (Internet Explorer 8.0, 9.0, or 10.0) and connect to the SDS NOAM VIP address. If a certificate error is received, click on the Continue to this website (not recommended) link.

   Figure 49-46 Web Security

   
   

   

   
   
2. In the SDS NOAM VIP, log in using the default user and password.

   Figure 49-47 NOAM GUI Log in

   
   

   

   
   
3. In the SDS NOAM VIP, edit the SOAM server. Expand Configuration click Server Groups.

   Figure 49-48 Server Groups

   
   

   

   
   
4. Select the SOAM server that was converted to the 1B Subscriber profile.

   Figure 49-49 Select SOAM Server

   
   

   

   
   
5. Click Edit.

   Figure 49-50 Edit

   
   

   

   
   

   Note:

   You may need to scroll to see the Edit button.
6. In the SDS NOAM VIP, prepare the server for pre-validation. Mark the SG Inclusion check box for the server.

   Figure 49-51 SG Inclusion

   
   

   

   
   
7. When the Pre-Validation passed message displays, click Apply.

   Figure 49-52 Pre-Validation passed

   
   

   

   
   
8. The Info banner changes to Data committed.

   Figure 49-53 Data committed

   
   

   

   
   
9. In the SDS NOAM VIP, view the alarm status. Expand Alarms & Events click View Active.

   Figure 49-54 Alarm Status

   
   

   

   
   
10. Verify if Event ID 10200 Remote Database re-initialization in progress is present with the SDS SOAM server host name.

    Figure 49-55 Event ID

    
    

    

    
    

    Note:

    Monitor the Event ID 10200 Remote Database re-initialization in progress alarm.

    Do not proceed to the next step until the alarm clears for the SDS SOAM server.

11. In the SDS NOAM VIP, verify status. Expand Status & Manage click Server.

    Figure 49-56 Status

    
    

    

    
    
12. Verify Server Status is Normal (Norm) for Database (DB) and Man for Processes (Proc).

    Figure 49-57 Server Status

    
    

    

    
    
13. In the SDS NOAM VIP restart the SOAM server.
14. Select the SOAM server.

    Figure 49-58 Select Server

    
    

    

    
    
15. Click Restart.

    Figure 49-59 Restart

    
    

    

    
    
16. Click OK to confirm.

    Figure 49-60 OK

    
    

    

    
    
17. A Successfully restarted application message displays in the banner.

    Figure 49-61 Successfully restarted application

    
    

    

    
    
18. In the SDS NOAM VIP, verify status. Expand Status & Manage click Server

    Figure 49-62 Server Status

    
    

    

    
    
19. Verify Appl State is Enabled and Server Status is Normal (Norm) for Alarm (Alm), Database (DB), Reporting Status, and Processes (Proc).

    Figure 49-63 Server State

    
    

    

    
    
20. Log out from the SDS NOAM VIP. Click Logout to log out of the SDS GUI.

    Figure 49-64 Log out

    
    

    

    
    
21. Execute SDS Health Check procedures as specified in Health Check Procedures.