MPs

A Diameter Agent Message Processor (DA-MP) is a computer or blade hosting the Diameter base protocol and one or more DSR Applications. Multiple DA-MPs are supported in a DSR system.

An SS7 Message Processor (SS7-MP) is a computer or blade hosting the MD-IWF SS7/TCAP Application that is used in translating MAP Request messages to Diameter Request messages.

An MP Profile defines maximum and threshold values for an MP. An MP Profile must be assigned to each DA-MP and SS7-MP in the system configuration. Select the appropriate MP Profile according to the hardware and application or applications that are running on the MP, as shown in mps.html#GUID-1BED4CC0-73A9-4500-BF09-EF416F9FAB47__V5744549.

Note:

The profiles listed in mps.html#GUID-1BED4CC0-73A9-4500-BF09-EF416F9FAB47__V5744549 and that appear on the MPs GUI pages might not include all of the profiles that are available for all Oracle Communications products. Product-specific profiles and instructions for assigning them are included in the Installation Guide for each product.

Table 3-2 MP Profile Selection

Hardware	Application(s)	MP Profile
DA-MPs
G6 half height blade	Diameter Relay	G6:Relay
G8/G9 half height blade	Diameter Relay	G8/G9:Relay
G7 full height blade	Diameter Relay	G7:Relay
Virtual DA-MP	Diameter Relay	VM:Relay Note: If a virtualized version of DSR is being used, then the MP Profile can be VM:10K_MPS.
Gen9V2 half height blade	Diameter Relay	Gen9V2:Relay
G6 half height blade	Diameter Relay + FABR or RBAR	G6:Database
G8/G9 half height blade	Diameter Relay + FABR or RBAR	G8/G9:Database
G7 full height blade	Diameter Relay + FABR or RBAR	G7:Database
Virtual DA-MP	Diameter Relay + FABR or RBAR	VM:Database Note: If a virtualized version of DSR is being used, then the MP Profile can be VM:10K_MPS.
Gen9V2 half height blade	Diameter Relay + FABR or RBAR	Gen9V2:Database
G6 half height blade	Diameter Relay + CPA or PCA	G6:Session
G8/G9 half height blade	Diameter Relay + CPA or PCA	G8/G9:Session
G7 full height blade	Diameter Relay + CPA or PCA	G7:Session
Virtual DA-MP	Diameter Relay + CPA or PCA	VM:10K_MPS
G6 half height blade	Diameter Relay + RBAR + PCA	G6:Session_Database
G8/G9 half height blade	Diameter Relay + RBAR + PCA	G8/G9:Session_Database
G7 full height blade	Diameter Relay + RBAR + PCA	G7:Session_Database
Gen9V2 half height blade	Diameter Relay + RBAR + PCA	Gen9V2:Session
SS7-MPs
G8/G9 half height blade	MAP-to-Diameter Interworking Function (MD-IWF) Application	G8/G9:MD-IWF
Virtual SS7-MP	MAP-to-Diameter Interworking Function (MD-IWF) Application	VM:MD-IWF
Virtual DA-MP	Diameter Relay + FABR or RBAR	VM:35K_MPS

MPs Profiles Elements describes the user-configurable and engineering-configured values in an MP Profile.

Note:

The Ingress Message Rate Alarm Threshold values for the PCA application are user-configurable on the NOAM Policy and Charging, and then Configuration, and then Congestion Options page; they are not shown in MPs Profiles Elements.