Realm Name
|
Name of the Realm where Diameter Peers are to be discovered.
|
Format: List
Range: NA
Default: NA
|
DNS Set
|
DNS server set used for Peer Discovery.
|
Format: List
Default: -Select-
|
Local Node
|
Local Node used to connect to all Peers discovered within
the Realm.
|
Format: List
Range: NA
Default: Initiator & Responder
|
Connection Mode
|
Specifies the connection mode used for Peer discovery.
|
Format: List
Range:
- Initiator Only
indicates that all connections to discovered Peers are Initiator Only; the
application attempts to initiate connection to these Peers.
- Initiator and
Responder indicates that all connections to discovered Peers are of the type
Initiator and Responder; the application attempts to initiate connection to the
discovered Peers as well as listen for connection attempts from these Peers.
Default: Initiator & Responder
|
Local Protocol Preference Override
|
If checked, this indicates that the local protocol
preferences specified for each Application ID take precedence over the protocol
preferences discovered for each Peer in the Realm.
|
Format: checkbox
Range: checked, unchecked
Default: Unchecked
|
Applications
|
List of applications used for
peer discovery.
|
-
CEX Parameters
- CEX parameters to be searched. You can specify up to ten
parameters. .
If no Vendor IDs are associated with the selected CEX
parameter,
Additional Supported Vendor
IDs is empty.
Note: Because each Realm can have one to ten CEX
parameters, you must use the plus (+) symbol to expand the list. Sorting by any
of the fields associated with the CEX parameter is not supported on the view
page.
|
-
CEX Parameters
- Format: List
- Range: Configured CEX parameters
- Default: -Select-
|
-
Additional Supported Vendor IDs
- Vendor IDs, in addition to the one specified in the CEX
parameter list, which can be paired with the Application ID.
|
-
Additional Supported Vendor IDs
- Format: Selection list
- Range: Vendor IDs configured for the Application ID
- Default: NA
|
-
Protocol Preferences
- If zero, the associated protocol is not used for
connections to a discovered Peer. Values 1 - 4 indicate the hierarchical local
protocol preferences (1 is most preferred, 4 is least preferred).
You can assign the same value to more than one protocol.
Note: This selection is not required if the Local
Protocol Preference Override checkbox is unchecked on the view page.
|
-
Protocol Preferences
- Format: Lists for TCP, SCTP, TLS, and DTLS)
- Range: 0 - 4
- Default: -Select-
|
-
Max Num Peers
- The maximum number of peers within the Realm that are
created for the selection Application ID.
|
-
Max Num Peers
- Format: numeric
- Range: 1 - 3
- Default: 2
|
-
Max Num Connections
- The maximum number of peers within the Realm that are
created spanning discovered Peers that support the associated Application ID.
|
-
Max Num Connections
- Format: numeric
- Range: 1 - 64
- Default: 2
|
Local IP Address
|
Specifies the local IP address to be used as the Local Node
address for all dynamic connections made to Peers in this Realm.
Note: SCTP multi-homed connections to discovered Peers
are not supported.
|
Format: List
Range:
Default:
|
IPFE Initiator DAMP
|
Specifies the DA-MP that initiates the dynamic connections.
Note: This is mandatory if the Local IP Address is a
Target Set address; otherwise it is not applicable.
|
Format: List
Range:
Default:
|
Connection Configuration Set
|
Specifies the configuration set to be used when dynamic
connections are made to Peers in this Realm.
|
Format: List
Range: NA
Default: Default
|
Capacity Configuration Set
|
Specifies the capacity configuration set to be used by all
dynamic connections made to Peers in this Realm.
|
Format: List
Range: NA
Default: Default
|
Realm Prefix
|
Specifies the Realm prefix to be used as the first portion
of the name of all configuration objects that are dynamically created by the
application as a function of Realm discovery.
|
Format: text box; case sensitive; alphanumeric and underscore
Range: 1 - 12 characters, cannot start with a digit and must
contain at least one alpha
Range: NA
Default: Default
|