Routes Insert Elements
Table 3-6 describes the elements of the Routes [Insert] form. Elements are displayed for the selected server or server group.
Table 3-6 Routes Insert Elements
Field | Description | Data Input Notes |
---|---|---|
Route Type | The type of route. |
Format: Option Range: Net, Default, Host Default: N/A A value is required. Note: The Default route option is available only if there is no default route configured on the target server. There can be no more than one IPv4 and one IPv6 default route defined. |
Device | The network device name through which traffic is routed. |
Format: List Range: Provisioned devices on the selected server Default: N/A A value is required. |
Destination |
The destination network address. Note: This field is disabled if the Route Type is default. |
Format: Valid network address Range: Dotted quad decimal (IPv4) or colon hex (IPv6) Default: N/A |
Netmask |
A valid netmask for the destination network. Note: This field is disabled if the Route Type is default. This field is disabled and set to 32 (IPv4) or 128 (IPv6) if the Route Type is host. |
Format: Valid netmask Range: Valid netmask for the network in prefix length (IPv4 or IPv6) or dotted decimal (IPv4) format Default: N/A |
Gateway IP | The IP Address of the gateway for the route. |
Format: Valid IP address Range: Dotted quad decimal (IPv4) or colon hex (IPv6) Default: N/A A value is required. |