3.1.3.1 Routes Elements
Table 3-5 describes the elements of the Routes page.
Table 3-5 Routes Elements
Tab/Field | Description |
---|---|
Server Group/Server | Server groups are presented in tabs at the top of the main work area. Selecting a specific server group reveals the individual servers of that group. Alternatively, selecting the Entire Network tab reveals all the servers defined in the system. After selecting a specific server group, the user has the option of selecting a specific server or selecting Entire Server Group to reveal the existing routes. |
Route Type | The type of route. Possible types are:
|
Destination | The destination network IP address and prefix length in the format: IP Address/Prefix Length |
Netmask | A valid netmask for the destination network |
Gateway | The IP Address of the gateway for the route |
Device Name |
The network device through which traffic is being routed. Note: This is not available on the Entire Server Group tab. |
Scope Status |
The current number of servers where the route was successfully configured out of the total servers in the server group. Note: This column is only present for server group scoped routes. |
Route Scope |
The scope of the route. Possible types are server and server group. Note: This column is only present for server sub-tabs. |
Configuration Status | The configuration status of the route. The possible states
are:
|
Is Locked? | Status of the lock state. The possible states are:
|