3.2.5.1 System Options elements
Table 3-5 describes the fields on the System Options page.
Table 3-5 System Options Elements
| Field | Description | Data Input Notes |
|---|---|---|
| ASCII Excluded Digits |
List of ASCII characters to ignore while parsing MSISDN digits from a raw AVP data field of AVP Type UTF8String. If an invalid character is entered, an error message appears. |
Format: field Default: none Range: ASCII printable characters except percentage sign (%), commercial sign (@), colon sign (:), and semi-colon (;). |
| Exclude Space |
Defines whether ASCII character space is ignored while parsing MSISDN digits from a raw AVP data field of AVP Type UTF8String If checked, ASCII character space is ignored. If not checked, ASCII character space is not ignored. |
Format: check box Default: unchecked |
| TBCD Excluded Digits |
Defines whether the associated digits is ignored while parsing digits from a raw AVP data field of AVP Type OctetString encoded as a TBCD-string If checked, digits are ignored. If not checked, digits are not ignored. |
Format: check boxes Range: checked, unchecked for each option: *(1010), #(1011), a(1100), b(1101), c(1110) Default: all unchecked |
| Allow Subsequent FABR Invocation | Enables the subsequent invocation of FABR on a different DSR node in the network. |
Format: check box Default: unchecked |
| Remove Destination-Host | If checked, FABR deletes any instance of Destination-Host AVPs in the message when performing Realm only resolution. |
Format: check box Default: unchecked |
| Realm |
Value to be placed in the Origin-Realm AVP of the Answer message generated by FABR. A Realm must be paired with a Fully Qualified Domain Name. If entering a value for Realm, then a value for Fully Qualified Domain Name must also be entered; otherwise, an error message appears. If a value is not entered, the local node Realm for the egress connection is used. |
Format: field Range: A valid Realm Default: none |
| Fully Qualified Domain Name |
Value to be placed in the Origin-Host AVP of the Answer message generated by FABR. A Fully Qualified Domain Name must be paired with a Realm. If entering a value for Fully Qualified Domain Name, then a value for Realm must also be entered; otherwise, an error message appears. If not configured, local node FQDN for the egress connection is used. |
Format: field Range: A valid FQDN - up to 255 characters; label-up to 63 characters. Default: none |
| Resource Exhaustion Result-Code |
Result-Code or Experimental-Result-Code value to be returned in an Answer message when a message is not successfully routed because of internal resource being exhausted. If Vendor-ID is configured, this result-code value is encoded as Experimental-Result-Code AVP; otherwise the result-code is encoded as Result-Code AVP. |
Format:
Range:
Default: 3004 |
| Resource Exhaustion Error Message | Error-Message AVP value to be returned in an Answer message when a message is not successfully routed because of internal resource being exhausted. |
Range: 0–64 characters Default: FABR Resource Exhausted |
| Resource Exhaustion Vendor-ID | Vendor-ID AVP value to be returned in an Answer message when a message is not successfully routed because of internal resource being exhausted. |
Format: field Range: 1–4294967295 |
| Application Unavailable Action |
Defines action to be taken when FABR is not available to process messages. If the
|
Format: options Range:
Default: Continue Routing |
| Application Unavailable Route List |
Defines where the requests are routed when FABR is not available. Peer Routing Rules are bypassed. A route list must be entered if
|
Format: list Range: Available Route List entries |
| Application Unavailable Result-Code |
Result-Code or Experimental-Result-Code value to be returned in an Answer message when a message is not successfully routed because FABR is not available. If Vendor-ID is configured, this result-code value is encoded as Experimental-Result-Code AVP; otherwise the result-code is encoded as Result-Code AVP. A code must be entered if either the
|
Format:
Range:
Default: 3002 |
| Application Unavailable Error Message |
Error-Message AVP value to be returned in an Answer message when a message is not successfully routed because FABR is not available. A message can be entered, if needed, when either the
|
Range: 0–64 characters Default: FABR Unavailable |
| Application Unavailable Vendor-ID |
Vendor-ID AVP value to be returned in an Answer message when a message is not successfully routed because FABR is not available. A vendor-ID must be entered if the
|
Format: field Range: 1–4294967295 |
| Bundling Enabled | If enabled, allows FABR to bundle DP query Events to form a DP Bundled query Event to send to DP server. | Format: check box |
| Maximum Bundle Size | Maximum number of individual DP query Events that can be bundled. |
Format: field Range: 2-20 Default: 5 |
| Prefix Search Enabled | If enabled, IMSI/MSISDN prefix based lookup is performed if the full address lookup did not find a match. |
Format: check box Default: unchecked |
| Blacklist Search Enabled | If enabled, IMSI/MSISDN blacklist lookup is performed prior to the full address lookup. |
Format: check box Default: unchecked |
| FallBack Search Enable | If enabled, Domain-Identifier lookup is performed when the external identifier lookup did not have an exact match. |
Format: check box Default: unchecked |
| Fabr Database Type | This user-configurable parameter takes options as SDS or UDR (Default: SDS). FABR queries are targeted based on field Fabr Database Type. Configuration can be changed to choose between SDS or UDR database type. DB change comes into effect after FABR application is disabled/enabled. |
Format: field Range: SDS, UDR Default: SDS |