3.1.3 Generating a Measurements Report

There are number of factors that derive the time taken for exporting the measurements like:
  • Measurement groups per export task
  • Measurements per Measurement group, whether measurement is arrayed or non-arrayed
  • Measurement Pegs
  • Number of servers in a topology
  • Availability of system resources like CPU and Memory

Refer to Table 3-2 to assess the number of measurement reports generated for each measurement group or scheduled in an export task. For example, an Address Resolution Exception measurement group has single and arrayed measurement types so two measurement reports are generated: one for sing and another for arrayed measurements.

Table 3-2 Number of Measurement Reports for Each Measurement Group

Report Group Sub-Group Type Number of Measurements
Address Resolution Exception NA Single 5
NA Arrayed 15
Address Resolution Performance NA Single 4
NA Arrayed 21
Application Routing Rules MeasARTId Arrayed 1
MeasApplRoutingRuleId Arrayed 4
Association Exception NA Arrayed 4
Association Usage NA Arrayed 1
CAPM MeasCapmDefId Arrayed 5
MeasCapmMeasId Arrayed 1
MeasConnectionId Arrayed 4
CPA Exception NA Single 11
NA Arrayed 2
CPA Performance NA Single 14
CPA Session DB NA Single 11
NA Arrayed 1
ComAgent Exception ComAgentHAServiceExceptionArrayed Arrayed 6
ComAgentHAServiceExceptionSingle Single 1
ComAgentMeasExceptionArrayed Arrayed 1
ComAgentMeasExceptionSingle Single 23
ComAgentPeerGroupExceptionArrayed Arrayed 2
ComAgentPeerGroupExceptionSingle Single 1
ComAgentPolicerFetchExceptionArrayed Arrayed 1
ComAgentRoutedServiceExceptionArrayed Arrayed 17
ComAgent Performance ComAgentHAServicePerformanceArrayed Arrayed 3
ComAgentMeasPerformanceArrayed Arrayed 2
ComAgentMeasPerformanceSingle Single 15
ComAgentPeerGroupPerformanceArrayed Arrayed 2
ComAgentRoutedServicePerformanceArrayed Arrayed 12
Connection Congestion NA Arrayed 2
Connection Exception NA Arrayed 2
Connection Performance Egress Arrayed 24
Egress Congestion Control Arrayed 10
Ingress Arrayed 7
Ingress Congestion Control Arrayed 21
Message Priority Arrayed 18
Connection Service NA Arrayed 7
Connection Transport NA Arrayed 13
DA-MP Exception NA Single 2
DA-MP Performance NA Single 211
NA Arrayed 4
DA-MP Service NA Single 2
DAS NA Single 14
  Arrayed 1
DCA Framework Exception DcaDalId Arrayed 5
DCA Framework Performance DcaDalId Arrayed 21
DSR Application Exception NA Single 4
NA Arrayed 3
DSR Application Performance NA Single 14
NA Arrayed 5
Diameter EIR Exception NA Single 23
Diameter EIR Performance NA Single 5
NA Arrayed 4
Diameter EIR Usage NA Single 31
Diameter Egress Transaction NA Single 2
NA Arrayed 8
Diameter Exception NA Single 3
NA Arrayed 6
Diameter Ingress Transaction Exception NA Single 3
NA Arrayed 10
Diameter Ingress Transaction Performance NA Arrayed 8
Diameter Performance NA Single 6
MeasConnectionId Arrayed 6
Diameter Rerouting NA Single 2
NA Arrayed 6
Egress Throttle Group Performance NA Arrayed 168
Egress Throttle List Performance NA Arrayed 167
Full Address Resolution Exception NA Single 5
NA Arrayed 15
Full Address Resolution Performance NA Single 10
NA Arrayed 14
IDIH NA Single 7
IPFE Exception IpfeTotal Single 2
IpfeTsa Arrayed 6
IPFE Performance IpfeMpServer Arrayed 6
IpfeTotal Single 5
IpfeTsa Arrayed 6
License Measurements NA Single 15
NA Arrayed 14
Link Exception NA Arrayed 4
Link Performance NA Arrayed 4
Link Set Performance NA Arrayed 4
Link Set Usage NA Arrayed 1
Link Usage NA Arrayed 4
LoadGen Performance NA Single 6
MP Performance NA Single 11
Message Priority NA Single 16
OAM.ALARM NA Single 4
OAM.SYSTEM NA Single 14
NA Arrayed 2
OC-DRA Congestion Exception NA Arrayed 1
OC-DRA Diameter Exception NA Single 12
NA Arrayed 13
OC-DRA Diameter Usage NA Single 2
NA Arrayed 4
HistogramMeasBuckets Arrayed 2
P-DRA Congestion Exception NA Single 6
P-DRA Diameter Exception NA Single 23
NA Arrayed 1
P-DRA Diameter Usage NA Single 22
HistogramMeasBuckets Arrayed 11
MeasApn Arrayed 1
MeasBuckets Arrayed 1
MeasPcrfPool Arrayed 1
MeasSubPoolRule Arrayed 1
P-DRA Site Diameter Usage MeasSBRuleIncCnt Arrayed 1
MeasSBRuleRmvLmt Arrayed 1
PCA NGN-PS Exception NA Single 3
PCA NGN-PS Performance NA Single 1
Peer Node Performance NA Arrayed 5
Peer Routing Rules MeasPRTId Arrayed 1
MeasPeerRoutingRuleId Arrayed 4
RD-IWF Performance NA Single 7
Route Group Exception NA Arrayed 2
Route Group Performance NA Arrayed 21
Route List NA Arrayed 4
Routing Usage NA Arrayed 5
SBR Audit NA Single 31
SBR Binding Exception NA Single 11
NA Arrayed 1
SBR Binding Performance NA Single 18
NA Arrayed 1
MeasAltKeys Arrayed 1
MeasBuckets Arrayed 2
MeasSBRemoval Arrayed 1
SBR Exception NA Single 4
NA Arrayed 6
SBR Performance NA Single 15
NA Arrayed 4
SBR Session Exception NA Single 11
MeasPendingRarDel Arrayed 1
SBR Session Performance NA Single 18
NA Arrayed 2
MeasApn Arrayed 2
MeasBuckets Arrayed 3
MeasInvokeSisRarType Arrayed 1
MeasInvokeSisResult Arrayed 1
MeasSessionsRemovedSis Arrayed 1
Server Exception NA Single 2
Server M3UA Exception NA Single 6
Server M3UA Performance NA Single 8
Server M3UA Usage NA Single 7
Server MTP3 Exception NA Single 9
NA Arrayed 1
Server MTP3 Performance NA Single 4
NA Arrayed 2
Server Resource Usage NA Single 8
Server SCCP Exception NA Single 28
NA Arrayed 1
Server SCCP Performance NA Single 18
NA Arrayed 4
Server TCAP Exception NA Single 19
NA Arrayed 1
Server TCAP Performance NA Single 8
NA Arrayed 2
Task Performance NA Arrayed 33
SS7 Exception measurements NA NA NA
SS7 Performance measurements NA NA NA
Topology Hiding Performance NA Single 10
NA Arrayed 10
Traffic Throttle Group Performance NA Arrayed 23
Traffic Throttle Point Performance NA Arrayed 139
Transport Exception NA Arrayed 10
Transport Performance NA Arrayed 12
Transport Usage NA Arrayed 2
Traffic Throttle Group Performance measurements NA NA NA
Traffic Throttle Point Performance Measurements NA NA NA
USBR Performance NA Single 1
NA Arrayed 10
vSTP Association Exception NA Arrayed 13
vSTP Association Usages NA Arrayed 3
vSTP IDPR Performance measurements NA Single 36
vSTP CDPA TT NA Arrayed 10
vSTP CGPA TT NA Arrayed 10
vSTP Connection NA Arrayed 9
vSTP Connection Exception NA Single 1
vSTP Connection Performance NA Arrayed 10
vSTP EIR Exception NA Single 7
vSTP EIR Performance NA Single 27
NA Arrayed 1
NA    
vSTP GFLEX Exception NA Single 2
vSTP GFLEX Performance NA Single 1
vSTP ISUP Exception NA Single 9
vSTP ISUP Performance NA Sigle 5
vSTP MP Performance NA Single 6
vSTP LICENSING NA Single 4
NA Arrayed 2
vSTP LSS Exception NA Single 6
vSTP LSS Performance NA Single 4
NA Arrayed 1
vSTP Link Exception NA Arrayed 12
vSTP Link Performance NA Arrayed 11
vSTP Link Usage NA Arrayed 12
vSTP Linkset Exception NA Arrayed 1
vSTP Linkset Performance NA Arrayed 7
vSTP Linkset Usage NA Arrayed 1
vSTP M2PA Exception VSTPM2PAExceptionArrayed Arrayed 1
VSTPM2PAExceptionSingle Single 2
VSTPM2PAExceptionVstpLinkArrayed Arrayed 14
vSTP M2PA Performance NA Single 9
NA Arrayed 4
vSTP M3UA Exception NA Single 9
vSTP M3UA Performance NA Single 4
vSTP M3UA Usage NA Single 27
vSTP MNP Exception NA Single 11
vSTP MNP Performance NA Single 19
NA Arrayed 1
vSTP MTP2 Performance NA Single 5
NA Arrayed 1
vSTP MTP2 Exception NA Arrayed by Link ID 12
vSTP MTP3 Exception NA Single 13
NA Arrayed 5
vSTP MTP3 Performance NA Single 12
NA Arrayed 7
vSTP SCCP Exception NA Single 12
Arrayed 4
vSTP SCCP Performance NA Single 36
NA Arrayed 16
vSTP SCCP Usages NA Single 1
vSTP Server Exception NA Single 5
vSTP Server Usage NA Single 4
vSTP MNP Exception NA Single 2
vSTP MNP Performance NA Single 3
vSTP SFAPP Performance NA Single 22
Arrayed 5
vSTP SFAPP Exception NA Single 9
vSTP SMS Proxy Performance NA Arrayed 7
Single 27
vSTP SMS Proxy Exception NA Arrayed 11
NA Single 22
vSTP GFLEX Performance NA Arrayed 1
NA Single NA

Perform the following procedure to generate and view measurements report:

  1. Click Measurements, and then Report.
  2. Select the Measurement Report.
  3. Click Interval.
  4. Select the Scope.
    For details about this field, or any field on the Measurements, and then Report page, see Measurement Elements.
  5. Select any filters you may want on the report (Optional).
  6. Click Time Range.
  7. Select Beginning or Ending as the Time Range interval reference point.
  8. Select the Beginning or Ending date.
  9. Click Go.

    Note:

    Data for the selected scope is displayed in the primary report page. Data for any available sub-scopes are displayed in tabs. For example, if the selected scope is Entire Network, report data for the entire network appears in the primary report page. The individual network entities within the entire network are considered sub-scopes.
  10. To view report data for a specific sub-scope, click on the tab for that sub-scope.