3.2.7.1 Enhanced Address Resolution Configuration Fields

The following table describes the fields in the Enhanced Address Resolutions section:

Table 3-7 Configuration Fields

Fields Description Data Input Notes
Rule Name Unique name of the Rule.

Format: Alphanumerical

Range: A 32-character string. Valid characters are alphanumeric and underscore. Must contain at least one alpha and must not start with a digit.] [A value is required.]

Default: NA
Priority Priority of the Rule.

Format: Numerical

Range: 1-99 [A value is required.]

Note:

Low value means higher priority.

Default: NA
Application ID The Application ID in the Diameter message.

Format: Alphanumerical

Range: List of Application IDs configured for RBAR [A value is required.]

Default: NA
Command Code Value The Command Code is one of the parameters contained in a Diameter Message.

Format: List or numeric

Range: Select from predefined Command Codes or enter a numeric value.

Default: NA
Routing Entity Type A routing entity can be a standalone routing entity or a routing entity that is part of a subscriber (group of related routing entities and Account ID values).

Format: Text

Range: IMSI, IMPI, IMPU] [A value is required.]

Default: NA
Primary AVP Primary AVP to be used for extracting the Routing Entity address.

Format: Text

Range: Entity types IMSI, IMPI:
  • Public Identity
  • Subscription-Id(1)
  • Subscription-Id(2)
  • Subscription-Id(3)
  • Subscription-Id(4)
  • ServiceInfo.Subscription-Id(1)
  • ServiceInfo.Subscription-Id(2)
  • ServiceInfo.Subscription-Id(3)
  • ServiceInfo.Subscription-Id(4)
  • UserIdentifier.UserName
  • UserIdentity.Public-Identity
  • UserName

Default: NA

Entity type IMPU:

  • MSISDN
  • Public Identity
  • ServiceInfo.Subscription-Id(0)
  • ServiceInfo.Subscription-Id(2)
  • ServiceInfo.Subscription-Id(3)
  • ServiceInfo.Subscription-Id(4)
  • Subscription-Id(0)
  • Subscription-Id(2)
  • Subscription-Id(3)
  • Subscription-Id(4)
  • UserIdentifier.MSISDN
  • UserIdentity.MSISDN
  • UserIdentity.Public-Identity
  • UserName

    [A value is required.]

Default: NA
Secondary AVP Secondary AVP to be used for extracting the Routing Entity Address.

Format: Text

Range: Similar Range as Primary AVP.

Default: NA
Conditions Conditions associated with the Enhanced Address Resolution. Each condition has three parts: a parameter, an operator, and a value. In order for a Diameter message to be matched by the Enhanced Address Resolution, it must match with the criteria of each condition specified below:
  • Destination and Origin Realm: Realm is a case insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes ('-'), and underscore ('_'). A label must start with a letter, digit, or underscore and must end with a letter or digit. Underscores may be used only as the first character.
  • Destination-Host and Origin-Host: Host is a case insensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, dashes ('-'), and underscore ('_'). A label must start with a letter, digit, or underscore and must end with a letter or digit. Underscores may be used only as the first character.
  • Access Point Name: APN is a case sensitive string consisting of a list of labels separated by dots, where a label may contain letters, digits, and dashes ('-'). A label must start with a letter or digit and must end with a letter or digit.

Destination and Origin Realm:

Format: Text

Range: A label must be at most 63 characters long and a Realm must be at most 255 characters long].

Default: NA

Destination-Host and Origin-Host:

Format: Text

Range: A label must be at most 63 characters long and a Host must be at most 255 characters long.]

Default: NA

Access Point Name:

Format: Text

Range: A label must be at most 63 characters long and an APN must be at most 100 characters long] [A value is required.]

Default: NA
Address Table Name Address table for the routing entity type. If Address table name is not selected for the primary routing entity, an error message displays. Format: list

Range: Available configured address table names.

Default: NA