3.2.7.2 Inserting an Enhanced Address Resolution

Perform the following procedure to add Enhanced Address Resolution:

Note:

Ensure there is at least one Address Table Name configured in the system.
  1. From the RBAR Main Menu, click RBAR, Configuration, Address Resolutions, and then Enhanced Address Resolutions.
  2. Click Insert from the bottom menu.
  3. Enter a unique Rule Name.
  4. Select a priority.

    Note:

    Low value means higher priority.
  5. Select an Application ID from the dropdown menu.
  6. Select a Command Code from the dropdown menu.

    Note:

    The Command Codes presented in the dropdown menu are created using Diameter Command Codes.
  7. Select a Routing Entity.
  8. Select the Primary AVP from the dropdown menu.
  9. If required, select the Secondary AVP from the dropdown menu.
  10. Apply the condition. For more information about conditions, see Enhanced Address Resolution Configuration Fields section.
  11. Select the Address Table Name from the dropdown menu.
  12. Click OK or Apply.