5.1.62 Gserv Data

Gserv Data will be an optional feature on top of G-Port which will allow the behavior of G-Port's SRI processing to be altered for SRIs received from a prepaid SCP as opposed to those received from an MSC. All configuration of GServ Data is done at the SOAM.

Select the VSTP, Configuration, and Gserv page. The page displays the fields on the Gserv Data. View and Insert pages.

Table 5-61 Gserv Data fields

Fields Description Range
Translation Type Translation type of this G Serv. It can be any integer in the range 0 to 255. Range: 0-255
OPC Ansi originating point code with subfields network indicator-network cluster-network cluster member (ni-nc-ncm). ITU international originating point code with subfields zone-area-id. The prefix subfield indicates a spare point code (prefix-zone-area-id). ITU originating point code in the format of a 5-digit number (nnnnn); or 2, 3, or 4 numbers (members). The prefix subfield indicates a spare point code (prefix-nnnnn, prefix-nnnnn-gc, prefix-m1-m2-m3-m4, prefix-m1-m2-m3-m4-gc). 24-bit ITU national originating point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp). Range: Maximum length allowed is 11
GTA GTA can be any valid string. Range: Maximum length allowed is 11
Domain This defines the type of SS7 domain. Range: None, ANSI, ITUI, ITUN, ITUN24, ITUI_S, ITUN_S

Adding a GServ Data

Perform the following steps to configure GServ Data:

  1. Click Insert.
  2. Enter the applicable values.
  3. Click OK, Apply, or Cancel.

Editing GServ Data

Perform this procedure to change the field values for the selected GServ Data:

  1. Select the GServ Data row to be edited.
  2. Click Edit.
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel.

    Note:

    The GServ Data field cannot be changed.

Deleting GServ Data

Perform the following procedure to delete GServ Data:

  1. Select the GServ Data to be deleted.
  2. Click Delete.
  3. Click OK or Cancel.