Domain: Administration: General Settings
Configuration Options Advanced Configuration Options
A domain is a collection of WebLogic Server instances that is managed by a single Administration Server. Use this page to configure administrative options that apply to all servers in the current domain.
Each WebLogic Server domain must have an Administration Server, which distributes configuration changes to other servers in the domain. In a typical production environment, you add one or more Managed Servers to the domain to host business applications and use the Administration Server only to configure and monitor the Managed Servers.
Name Description Name
The name of this WebLogic Server domain.
Enable Administration Port
Specifies whether the domain-wide administration port should be enabled for this WebLogic Server domain. Because the administration port uses SSL, enabling the administration port requires that SSL must be configured for all servers in the domain.
The domain-wide administration port enables you to start a WebLogic Server instance in
STANDBYstate. It also allows you to separate administration traffic from application traffic in your domain. Because all servers in the domain must enable or disable the administration port at once, you configure the default administration port settings at the domain level.
If you enable the administration port:
The administration port accepts only connections that specify administrator credentials.
Connections that specify administrator credentials can use only the administration port.
The command that starts managed servers must specify a secure protocol and the administration port:
The common secure administration port for this WebLogic Server domain. (Requires you to enable the administration port.)
Specifies whether all servers in this domain run in production mode.
Enable Exalogic Optimizations
Specifies whether optimizations for Oracle Exalogic should be enabled. Optimizations include improved thread management and request processing, and reduced lock contention. This attribute should be enabled only when configuring a WebLogic domain for Oracle Exalogic.
Enable Cluster Constraints
Specifies that deployments targeted to a cluster succeed only if all servers in the cluster are running.
By default, cluster constraints are disabled and deployment is attempted only on the servers that are reachable at the time of deployment from the Administration Server. Any servers that have been shut down or are temporarily partitioned from the Administration Server will retrieve the deployment during server startup or shortly after the network partition is resolved.
Enable On-Demand Deployment of Internal Applications
Specifies whether internal applications such as the console, uddi, wlstestclient, and uddiexplorer are deployed on demand (first access) instead of during server startup.
Enable Oracle Guardian Agent
Specifies whether the Guardian Agent is deployed when starting servers in the current domain.
Advanced Configuration Options
Name Description Enable Web Service Test Page
Specifies whether the WebLogic Server automatically deploys Web Service Test Page in the current domain.
The default protocol for communicating through the administration port or administration channels. (Requires you to enable the administration port or to create an administration channel.)
If requests through the administration port or an administration channel do not specify a protocol, WebLogic Server uses the protocol specified here.
Valid admin protocols are:
Configuration Audit Type
Returns the criteria used for auditing configuration events (configuration changes and other operations):
Configuration events will neither be written to the server log or directed to the Security Audit Framework.
Configuration events will be written to the server log.
Configuration events will be directed to the Security Audit Framework.
Configuration events will be written to the server log and directed to the Security Audit Framework.
Configuration Archive Enabled
If true, then backups of the configuration will be made during server boot.
Archive Configuration Count
The number of archival versions of
config.xmlsaved by the Administration Server each time the domain configuration is modified.
Compatibility MBean Server Enabled
Enables JMX clients to use the deprecated
Prior to 9.0, WebLogic Server supported a typed API layer over its JMX layer. Your JMX application classes could import type-safe interfaces for WebLogic Server MBeans, retrieve a reference to the MBeans through the
weblogic.management.MBeanHomeinterface, and invoke the MBean methods directly.
Server Log Format Compatibility Enabled
Configures whether log messages will be logged in legacy format without supplemental attributes.
Management EJB Enabled
Enables access to the Management EJB (MEJB), which is part of the Java EE Management APIs (JSR-77).
The Management API specification provides a standardized management data model for common resources on Java EE Web application servers.
The MEJB provides access to Java EE Managed Objects (JMOs), which describe the common Java EE resources. If you set this attribute to
false, WebLogic Server does not register the MEJB in the JNDI tree, and effectively disables the Java EE Management APIs for the domain.
Platform MBean Server Enabled
Specifies whether each server instance initializes the JDK's platform MBean server. Enabling it, along with
isPlatformMBeanServerUsed, causes WebLogic Server to use the platform MBean server as its Runtime MBean Server.
As of JDK 1.5, JVMs provide a platform MBean server that local processes can instantiate. There can be only one instance of the platform MBean server for each JVM. When a process instantiates this MBean server, the JVM creates several platform MXBeans that provide monitoring data for the JVM itself.
If you set this attribute to
true, each WebLogic Server instance invokes the method
java.lang.management.ManagementFactory.getPlatformMBeanServer()and thus causes the initialization of the JVM's MXBeans.
Platform MBean Server Used
Specifies whether WebLogic Server will use the platform MBean server for its Runtime MBean Server. Previously, WebLogic Server used the platform MBean server by default if it was enabled. This attribute provides a separation between enabling the platform MBean server and using it for WebLogic Server MBeans.
The default value for this attribute is based on the
DomainVersionattribute of the DomainMBean. If the domain version is prior to 10.3.3.0, then the default value of this attribute is
falseand the platform MBean server is not used. If the domain version is 10.3.3.0 or higher, then the default value of this attribute is
trueand the platform MBean server is used.
In this case, the server's Runtime MBean Server uses the
java.lang.management.ManagementFactory.getPlatformMBeanServer()method as its MBean Server. This makes it possible to access the WebLogic Server MBeans and the JVM platform MXBeans from a single MBean server. In addition, if you enable the Runtime MBean Server to be the Platform MBean Server, local processes in the JVM can directly access this MBean server through the
Enable Remote Deployer EJB
Specifies whether the Remote Deployer EJB is automatically deployed in the current domain. The Remote Deployer EJB is only used by the weblogic.Deployer tool in the WLS 9.0 and 9.1 releases when the -remote option is specified.
If the Remote Deployer EJB is not deployed, you will not be able to use the -remote option in weblogic.Deployer running in a 9.0 or 9.1 installation. You can still use the -remote option from weblogic.Deployer in 9.2 or later releases.
Enable RESTful Management Services
Enables the monitoring of this WebLogic Server domain through the RESTful Management Services Web application.
Diagnostic Context Compatibility Mode
Specifies whether WLDF sends a pre-12.2.1-style diagnostic context along with the current-style diagnostic context.
If outbound communication to pre-12.2.1 servers is possible, this setting should always be enabled to ensure that those servers receive a diagnostic context that they can process. Disabling this setting in those scenarios can result in correlation information being lost across tiers, and in information reported by WLDF and DMS to become of sync in some situations.
If there is no outbound communication to pre-12.2.1 servers possible, it is suggested to disable this mode as only the current-style diagnostic context is needed to be propagated outbound (propagating the old style will not cause a failure, but is unnecessary overhead in that situation).
This setting affects outbound only, inbound pre-12.2.1 style diagnostic contexts are always understood and handled.
Enable EE Compliant Class loading for Embedded Adapters
Specifies the class loading behavior for embedded adapters. If you enable this option, embedded adapters deployed to all partitions in the domain will use Java EE compliant class loading. The embedded adapter's classes will be accessible from other modules in the same application.
Enable Implicit Bean Discovery
Enable or disable implicit bean discovery for all applications deployed to the domain. This is used for CDI 1.0 application compatibility.
Lifecycle Management Services Availability
The deployment model for LifecycleManager services in this domain.
Lifecycle Management Notifications Enabled
Determine if LifecycleManager should listen for configuration changes on this server.
Lifecycle Management Remote Domain Name
The user-specified name of this MBean instance.
This name is included as one of the key properties in the MBean's
Lifecycle Management Remote URL
Returns the URL for the root REST resource for the LifecycleManager instance. For example, http://localhost:7001/lifecycle/188.8.131.52/
Lifecycle Management Remote Username
The user name that will be passed when opening a connection to a LifecycleManager instance (specified by the URL value for this endpoint). If not set, then no user name will be specified when establishing an connection.
Lifecycle Management Remote Password
Get the password in clear text. (disallowed by default - use getPasswordEncrypted)
Invocation Timeout Seconds
The number of seconds that internal WebLogic Server processes wait to connect to an MBean server, invoke an MBean server method, and return the results of the invocation. If the MBean server method does not complete (return) within the timeout period, WebLogic Server abandons its invocation attempt.
Some internal management processes within WebLogic Server require a server instance to connect to MBean servers in other WebLogic Server instances and invoke an MBean server method. The timeout period prevents the internal process from locking up if an MBean server cannot successfully return a method invocation.
A value of
0(zero) prevents the method invocation from timing out. With such a value, the internal process will wait indefinitely until the MBean server's method returns.
The name of the site this domain is associated with.