5100 - Traffic Overload
- Alarm Group:
- IPFE
- Description:
-
Total IPFE signaling traffic rate is approaching or exceeding its engineered capacity. IPFE defined a engineering capacity to monitoring the ingress signaling traffic rate. This alarm is raised when the total IPFE signaling traffic rate is approaching or exceeding its engineered capacity. This alarm is different to the alarm 5013, No packages drop at this point.
The severity thresholds are:- Minor: set at 245 MB/second, clear at 220 MB/second
- Major: set at 327 MB/second, clear at 302 MB/second
- Critical: set at 409 MB/second, clear at 384 MB/second
- Severity:
- Minor, Major, Critical
- Instance:
- N/A
Note:
If the signaling traffic declines below the clear threshold, the alarm clears. - HA Score:
- Normal
- Auto Clear Seconds:
- N/A
- OID:
- ipfeIpfeTrafficOverloadNotify
- Cause:
-
The severity thresholds are:
- Minor: set at 245 MB/second, clear at 220 MB/second
- Major: set at 327 MB/second, clear at 302 MB/second
- Critical: set at 409 MB/second, clear at 384 MB/second
- Diagnostic Information:
- Refer to the KPI to check the IPFE data rate:
Recovery:
- The application is in excess of its design parameters, and may exhibit traffic loss if an additional failure occurs. Consider expanding system to accommodate additional capacity.
- It is recommended to contact My Oracle Support if further assistance is needed.