Receive and Inspect the Shipment
Carefully inspect the Roving Edge Device shipment before you unpack the shipment.
Report any damage or concerns to Oracle using a Service Request ticket. See Getting Help and Contacting Support and My Oracle Support.
Obtain Shipment Details
Perform these steps to gather information you can use to inspect the shipment and ensure a tamper free device.
-
Sign in to your Oracle Cloud Infrastructure (OCI) tenancy.
-
From the console navigation menu, click Hybrid, then click Roving Edge Infrastructure.
- Select the compartment for this device.
-
Click Manage Nodes.
-
Click the node name to display the details page, and make note of these details:
- Device request is updated to a Delivered status
- The date and time it was received
- The serial number
Inspect the Shipment
- Visually inspect the device shipping container for any damage, tampering, or missing ties before opening it.
- Compare the serial number that appears on all the security ties with the serial number listed for the device in your tenancy.
- Unpack and visually inspect the device for any tampering or damage.
-
Ensure that you've received all the shipping kit contents, as shown in the following illustration.
Note
The device ships with either a ruggedized case or a rackmounting kit based on what was specified when the device node was created. See Creating a Roving Edge Infrastructure Device Node.
| No. | Item |
|---|---|
| 1 |
Roving Edge Device |
| 2 |
One of the following:
|
| 3 |
USB-to-DB-9 serial cable For devices with ruggedized cases, the cable is in a pouch inside the rear of the case. |
| 4 |
AC power cord For devices with ruggedized cases, the power cord is in a pouch inside the rear of the case. |
Roving Edge Device Rear Panel
Use one of the following illustrations to familiarize yourself with the Roving Edge Device.
If your device is in a ruggedized case, you can view the rear panel after you removed the case end-caps, described in Remove the Ruggedized Case End-Caps.
Roving Edge 2 Rear Panel
| No. | Description |
|---|---|
| 1 | Reserved Ethernet port 3. Don't use. |
| 2 |
Ethernet ports 2 (center left) and 1 (center right). Can optionally be used for network bonding. |
| 3 |
Default Ethernet port 0. Connect to your network. Note: To meet MIL-STD-461 Rev G RE102 requirements, all Ethernet network cables attached to the Roving Edge Device must be CAT8 rated. |
| 4 | Power receptacle |
| 5 |
System status LED
|
| 6 | Reset button |
| 7 |
Power switch and LED
|
| 8 | DB-9 serial console port |
Roving Edge 1 Rear Panel
| No. | Description |
|---|---|
| 1 | Power override switch. |
| 2 |
Two 100GbE QSFP28 Ethernet ports |
| 3 | Power receptacle |
| 4 | Power switch |
| 5 |
Two 10GB RJ45 Ethernet ports Use port labeled 4 for connectivity to your network. |
| 6 | DB-9 serial console port |
To meet MIL-STD-461 Rev G RE102 requirements, all Ethernet network cables attached to the Roving Edge Device must be CAT8 rated.
- If your device is inside a ruggedized case, see Remove the Ruggedized Case End-Caps.
- If the device isn't in a ruggedized case, install your device in a rack. See Mount the Device in a Rack.