@Generated(value="OracleSDKGenerator", comments="API Version: 20160918") public final class AddSecurityRuleDetails extends Object
A rule for allowing inbound (INGRESS) or outbound (EGRESS) IP packets.
Note: Objects should always be created or deserialized using the AddSecurityRuleDetails.Builder
. This model distinguishes fields that are null
because they are unset from fields that are explicitly set to null
. This is done in the setter methods of the AddSecurityRuleDetails.Builder
, which maintain a set of all explicitly set fields called __explicitlySet__
. The hashCode()
and equals(Object)
methods are implemented to take __explicitlySet__
into account. The constructor, on the other hand, does not set __explicitlySet__
(since the constructor cannot distinguish explicit null
from unset null
).
Modifier and Type | Class and Description |
---|---|
static class |
AddSecurityRuleDetails.Builder |
static class |
AddSecurityRuleDetails.DestinationType
Type of destination for the rule.
|
static class |
AddSecurityRuleDetails.Direction
Direction of the security rule.
|
static class |
AddSecurityRuleDetails.SourceType
Type of source for the rule.
|
Constructor and Description |
---|
AddSecurityRuleDetails(String description,
String destination,
AddSecurityRuleDetails.DestinationType destinationType,
AddSecurityRuleDetails.Direction direction,
IcmpOptions icmpOptions,
Boolean isStateless,
String protocol,
String source,
AddSecurityRuleDetails.SourceType sourceType,
TcpOptions tcpOptions,
UdpOptions udpOptions)
Deprecated.
|
Modifier and Type | Method and Description |
---|---|
static AddSecurityRuleDetails.Builder |
builder()
Create a new builder.
|
boolean |
equals(Object o) |
Set<String> |
get__explicitlySet__() |
String |
getDescription()
An optional description of your choice for the rule.
|
String |
getDestination()
Conceptually, this is the range of IP addresses that a packet originating from the instance can go to.
|
AddSecurityRuleDetails.DestinationType |
getDestinationType()
Type of destination for the rule.
|
AddSecurityRuleDetails.Direction |
getDirection()
Direction of the security rule.
|
IcmpOptions |
getIcmpOptions()
Optional and valid only for ICMP and ICMPv6.
|
Boolean |
getIsStateless()
A stateless rule allows traffic in one direction.
|
String |
getProtocol()
The transport protocol.
|
String |
getSource()
Conceptually, this is the range of IP addresses that a packet coming into the instance can come from.
|
AddSecurityRuleDetails.SourceType |
getSourceType()
Type of source for the rule.
|
TcpOptions |
getTcpOptions()
Optional and valid only for TCP.
|
UdpOptions |
getUdpOptions()
Optional and valid only for UDP.
|
int |
hashCode() |
String |
toString() |
@ConstructorProperties(value={"description","destination","destinationType","direction","icmpOptions","isStateless","protocol","source","sourceType","tcpOptions","udpOptions"}) @Deprecated public AddSecurityRuleDetails(String description, String destination, AddSecurityRuleDetails.DestinationType destinationType, AddSecurityRuleDetails.Direction direction, IcmpOptions icmpOptions, Boolean isStateless, String protocol, String source, AddSecurityRuleDetails.SourceType sourceType, TcpOptions tcpOptions, UdpOptions udpOptions)
public static AddSecurityRuleDetails.Builder builder()
Create a new builder.
public String getDescription()
An optional description of your choice for the rule. Avoid entering confidential information.
public String getDestination()
Conceptually, this is the range of IP addresses that a packet originating from the instance can go to.
Allowed values:
An IP address range in CIDR notation. For example: 192.168.1.0/24
or 2001:0db8:0123:45::/56
Note that IPv6 addressing is currently supported only in the Government Cloud.
The cidrBlock
value for a Service
, if you’re setting up a security rule for traffic destined for a particular Service
through a service gateway. For example: oci-phx-objectstorage
.
The OCID of a NetworkSecurityGroup
in the same VCN. The value can be the NSG that the rule belongs to if the rule’s intent is to control traffic between VNICs in the same NSG.
public AddSecurityRuleDetails.DestinationType getDestinationType()
Type of destination for the rule. Required if direction
= EGRESS
.
Allowed values:
CIDR_BLOCK
: If the rule’s destination
is an IP address range in CIDR notation.
SERVICE_CIDR_BLOCK
: If the rule’s destination
is the cidrBlock
value for a Service
(the rule is for traffic destined for a particular Service
through a service gateway).
NETWORK_SECURITY_GROUP
: If the rule’s destination
is the OCID of a NetworkSecurityGroup
.
public AddSecurityRuleDetails.Direction getDirection()
Direction of the security rule. Set to EGRESS
for rules to allow outbound IP packets, or INGRESS
for rules to allow inbound IP packets.
public IcmpOptions getIcmpOptions()
Optional and valid only for ICMP and ICMPv6. Use to specify a particular ICMP type and code as defined in: - ICMP Parameters - ICMPv6 Parameters
If you specify ICMP or ICMPv6 as the protocol but omit this object, then all ICMP types and codes are allowed. If you do provide this object, the type is required and the code is optional. To enable MTU negotiation for ingress internet traffic via IPv4, make sure to allow type 3 ("Destination Unreachable") code 4 ("Fragmentation Needed and Don’t Fragment was Set"). If you need to specify multiple codes for a single type, create a separate security list rule for each.
public Boolean getIsStateless()
A stateless rule allows traffic in one direction. Remember to add a corresponding stateless rule in the other direction if you need to support bidirectional traffic. For example, if egress traffic allows TCP destination port 80, there should be an ingress rule to allow TCP source port 80. Defaults to false, which means the rule is stateful and a corresponding rule is not necessary for bidirectional traffic.
public String getProtocol()
The transport protocol. Specify either all
or an IPv4 protocol number as defined in Protocol Numbers. Options are supported only for ICMP ("1"), TCP ("6"), UDP ("17"), and ICMPv6 ("58").
public String getSource()
Conceptually, this is the range of IP addresses that a packet coming into the instance can come from.
Allowed values:
An IP address range in CIDR notation. For example: 192.168.1.0/24
or 2001:0db8:0123:45::/56
Note that IPv6 addressing is currently supported only in the Government Cloud.
The cidrBlock
value for a Service
, if you’re setting up a security rule for traffic coming from a particular Service
through a service gateway. For example: oci-phx-objectstorage
.
The OCID of a NetworkSecurityGroup
in the same VCN. The value can be the NSG that the rule belongs to if the rule’s intent is to control traffic between VNICs in the same NSG.
public AddSecurityRuleDetails.SourceType getSourceType()
Type of source for the rule. Required if direction
= INGRESS
.
CIDR_BLOCK
: If the rule’s source
is an IP address range in CIDR notation.
SERVICE_CIDR_BLOCK
: If the rule’s source
is the cidrBlock
value for a Service
(the rule is for traffic coming from a particular Service
through a service gateway).
NETWORK_SECURITY_GROUP
: If the rule’s source
is the OCID of a NetworkSecurityGroup
.
public TcpOptions getTcpOptions()
Optional and valid only for TCP. Use to specify particular destination ports for TCP rules. If you specify TCP as the protocol but omit this object, then all destination ports are allowed.
public UdpOptions getUdpOptions()
Optional and valid only for UDP. Use to specify particular destination ports for UDP rules. If you specify UDP as the protocol but omit this object, then all destination ports are allowed.
Copyright © 2016–2020. All rights reserved.