The domain name system (DNS) addresses that the Compute Cloud@Customer infrastructure uses for the data center network.
Information about the management nodes that are provisioned in the Compute Cloud@Customer infrastructure.
The hostname corresponding to the virtual IP (VIP) address of the management nodes.
The IP address used as the virtual IP (VIP) address of the management nodes.
Addresses of the network spine switches.
The spine switch public virtual IP (VIP). Traffic routed to the Compute Cloud@Customer infrastructure and and virtual cloud networks (VCNs) should have this address as next hop.
Domain name to be used as the base domain for the internal network and by public facing services.
Uplink gateway in the datacenter network that the Compute Cloud@Customer connects to.
Netmask of the subnet that the Compute Cloud@Customer infrastructure is connected to.
Number of uplink ports per spine switch. Connectivity is identical on both spine switches. For example, if input is two 100 gigabyte ports; then port-1 and port-2 on both spines will be configured. Note: Numbers greater than Number.MAX_SAFE_INTEGER will result in rounding issues.
The port forward error correction (FEC) setting for the uplink port on the Compute Cloud@Customer infrastructure.
Uplink port speed defined in gigabytes per second. All uplink ports must have identical speed. Note: Numbers greater than Number.MAX_SAFE_INTEGER will result in rounding issues.
The virtual local area network (VLAN) maximum transmission unit (MTU) size for the uplink ports. Note: Numbers greater than Number.MAX_SAFE_INTEGER will result in rounding issues.
Configuration information for the Compute Cloud@Customer infrastructure. This network configuration information cannot be updated and is retrieved from the data center. The information will only be available after the connectionState is transitioned to CONNECTED.