Get the endpoint that is being used to call (ex, https://www.example.com).
Sets the endpoint to call (ex, https://www.example.com).
The endpoint of the service.
Sets the region to call (ex, Region.US_PHOENIX_1). Note, this will call {@link #endpoint(String) endpoint} after resolving the endpoint.
The region of the service.
Sets the regionId to call (ex, 'us-phoenix-1').
Note, this will first try to map the region ID to a known Region and call {@link #region(Region) region}. If no known Region could be determined, it will create an endpoint assuming its in default Realm OC1 and then call {@link #endpoint(String) endpoint}.
The public region ID.
Determines whether realm specific endpoint should be used or not. Set realmSpecificEndpointTemplateEnabled to "true" if the user wants to enable use of realm specific endpoint template, otherwise set it to "false"
flag to enable the use of realm specific endpoint template
Mark the Term Version identified by the id as active This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ActivateTermVersionResponse
Cancels the work request with the given ID. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CancelWorkRequestResponse
Cascade delete the listing and its subresources. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CascadingDeleteListingResponse
Cascade delete listing revision and its subresources. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CascadingDeleteListingRevisionResponse
Moves the specified artifact to the specified compartment within the same tenancy. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeArtifactCompartmentResponse
Moves a listing from one compartment to another This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeListingCompartmentResponse
Updates the Listing Revision to New status This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeListingRevisionToNewStatusResponse
Moves a term from one compartment to another This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeTermCompartmentResponse
Clone the published/withdrawn Listing Revision identified by the identifier. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CloneListingRevisionResponse
Close the client once it is no longer needed
Creates a new artifact in your compartment. You must specify your compartment ID in the request object.
You must also specify a *name* for the artifact(although it can be an empty string). It does not have to be unique, and you can change it anytime with {@link #updateArtifact(UpdateArtifactRequest) updateArtifact}..
You must also specify a *artifactType* for the artifact. Allowed values are CONTAINER_IMAGE and HELM_CHART
You must also provide the container or helm chart registry details for the corresponding images. Oracle container registry details (Registry/Concepts/registryoverview.htm).
After you send your request, the new object's `status` will temporarily be IN_PROGRESS and `lifecycleState` will be CREATING. Before using the object, first make sure its `lifecycleState` has changed to ACTIVE and the status has changed to \u2018AVAILABLE\u2019 for the new Artifact.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateArtifactResponse
Creates a new listing in your compartment. You must specify your compartment ID in the request object.
You must also specify a *name* for the listing and cannot be updated later.
You must also specify a *packageType* for the listing. Allowed values are CONTAINER_IMAGE and HELM_CHART
After you send your request, the new object's `lifecycleState` will be CREATING. Before using the object, first make sure its `lifecycleState` has changed to ACTIVE.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateListingResponse
Creates a new Listing Revision.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateListingRevisionResponse
Creates a new listing revision attachment.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateListingRevisionAttachmentResponse
Creates a new Listing Revision Note.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateListingRevisionNoteResponse
Creates a new Listing Revision Package.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateListingRevisionPackageResponse
Creates a new Term.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateTermResponse
Creates a new Term Version. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateTermVersionResponse
Creates a new MarketplacePublisherWaiter for resources for this service.
The waiter configuration for termination and delay strategy
The service waiters.
Deletes the specified artifact. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteArtifactResponse
Deletes a listing by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteListingResponse
Deletes a listing by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteListingRevisionResponse
Deletes a listing revision attachment by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteListingRevisionAttachmentResponse
Deletes a listing revision note by the identifier. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteListingRevisionNoteResponse
Deletes a listing revision package by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteListingRevisionPackageResponse
Deletes a Term by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteTermResponse
Deletes a Term by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteTermVersionResponse
Gets the specified artifact's information. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetArtifactResponse
Gets the specified category's information. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetCategoryResponse
Gets the details for a listing.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetListingResponse
Gets the details for a listing revision.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetListingRevisionResponse
Get the details of the specified listing revision attachment.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetListingRevisionAttachmentResponse
Get note details by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetListingRevisionNoteResponse
Get the details of the specified version of a package.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetListingRevisionPackageResponse
Gets the specified market's information. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetMarketResponse
Gets a Product by code identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetProductResponse
Gets a Publisher by identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetPublisherResponse
Gets a Term by identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetTermResponse
Gets a Term Version by the identifier This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetTermVersionResponse
Gets the waiters available for resources for this service.
The service waiters.
Gets details of the work request with the given ID. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetWorkRequestResponse
Lists the artifacts in your compartment. You must specify your compartment's OCID as the value for the compartment ID. For information about OCIDs, see Resource Identifiers (Content/General/Concepts/identifiers.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListArtifactsResponse
Lists the categories in your compartment. You must specify your compartment's OCID as the value for the compartment ID. For information about OCIDs, see Resource Identifiers (Content/General/Concepts/identifiers.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListCategoriesResponse
Gets the list of attachments for a listing revision in a compartment
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListListingRevisionAttachmentsResponse
Gets the list of notes for a listing revision.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListListingRevisionNotesResponse
Gets the list of packages for a listing revision.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListListingRevisionPackagesResponse
Lists the list of listing revisions for a specific listing ID, compartment ID or listing revision status.
You can specify your compartment's OCID as the value for the compartment ID. For information about OCIDs, see Resource Identifiers (Content/General/Concepts/identifiers.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListListingRevisionsResponse
Lists the listings in your compartment. You must specify your compartment's OCID as the value for the compartment ID. For information about OCIDs, see Resource Identifiers (Content/General/Concepts/identifiers.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListListingsResponse
Lists the markets in your compartment. You must specify your compartment's OCID as the value for the compartment ID. For information about OCIDs, see Resource Identifiers (Content/General/Concepts/identifiers.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListMarketsResponse
Lists the products in your compartment. You must specify your compartment's OCID as the value for the compartment ID. For information about OCIDs, see Resource Identifiers (Content/General/Concepts/identifiers.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListProductsResponse
Returns a list of publishers. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListPublishersResponse
Returns a list of the publisher term versions. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListTermVersionsResponse
Returns a list of the publisher terms. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListTermsResponse
Returns a (paginated) list of errors for the work request with the given ID.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListWorkRequestErrorsResponse
Returns a (paginated) list of logs for the work request with the given ID.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListWorkRequestLogsResponse
Lists the work requests in a compartment.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListWorkRequestsResponse
Mark the Listing Revision Package identified by the id and package version as default This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
MarkListingRevisionPackageAsDefaultResponse
Publish the Listing revision identified by Identifier. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
PublishListingRevisionResponse
Updates the Listing Revision to PublishAsPrivate This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
PublishListingRevisionAsPrivateResponse
Updates the Listing Revision Package to publish status This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
PublishListingRevisionPackageResponse
Shutdown the circuit breaker used by the client when it is no longer needed
Update the Listing Revision identified by the id for review This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
SubmitListingRevisionForReviewResponse
Updates the Listing Revision Package to Unpublish status This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UnPublishListingRevisionPackageResponse
Updates the specified artifact identified by the id. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateArtifactResponse
Updates the specified Listing identified by the id. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateListingResponse
Updates the Listing Revision This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateListingRevisionResponse
Updates the Listing Revision Attachment This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateListingRevisionAttachmentResponse
Update a file to listing revision attachment This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateListingRevisionAttachmentContentResponse
Updates the Listing Revision This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateListingRevisionIconContentResponse
Updates the Listing Revision Package. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateListingRevisionPackageResponse
Updates the Term This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateTermResponse
Updates the Term Version This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateTermVersionResponse
Updates the Term Version attachment This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateTermVersionContentResponse
Validate and publish artifact. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ValidateAndPublishArtifactResponse
Update the Listing Revision identified by the id as Withdraw/UnPublished. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
WithdrawListingRevisionResponse
This service client uses {@link common.CircuitBreaker.DefaultConfiguration} for all the operations by default if no circuit breaker configuration is defined by the user.