Get the endpoint that is being used to call (ex, https://www.example.com).
Sets the endpoint to call (ex, https://www.example.com).
The endpoint of the service.
Sets the region to call (ex, Region.US_PHOENIX_1). Note, this will call {@link #endpoint(String) endpoint} after resolving the endpoint.
The region of the service.
Sets the regionId to call (ex, 'us-phoenix-1').
Note, this will first try to map the region ID to a known Region and call {@link #region(Region) region}. If no known Region could be determined, it will create an endpoint assuming its in default Realm OC1 and then call {@link #endpoint(String) endpoint}.
The public region ID.
Determines whether realm specific endpoint should be used or not. Set realmSpecificEndpointTemplateEnabled to "true" if the user wants to enable use of realm specific endpoint template, otherwise set it to "false"
flag to enable the use of realm specific endpoint template
Adds packages to a software source. This operation can only be done for custom and versioned custom software sources that are not created using filters. For a versioned custom software source, you can only add packages when the source is created. Once content is added to a versioned custom software source, it is immutable.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
AddPackagesToSoftwareSourceResponse
Updates the availability for a list of specified software sources.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeAvailabilityOfSoftwareSourcesResponse
Moves the specified software sources to a different compartment within the same tenancy. For information about moving resources between compartments, see Moving Resources to a Different Compartment.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeSoftwareSourceCompartmentResponse
Close the client once it is no longer needed
Registers the necessary entitlement credentials for OS vendor software sources for a tenancy.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateEntitlementResponse
Creates a new versioned or custom software source.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateSoftwareSourceResponse
Creates a new SoftwareSourceWaiter for resources for this service.
The waiter configuration for termination and delay strategy
The service waiters.
Deletes the specified software source. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteSoftwareSourceResponse
Returns information about the specified erratum based on its advisory name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetErratumResponse
Returns information about the specified module stream in a software source.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetModuleStreamResponse
Returns information about the specified module stream profile in a software source.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetModuleStreamProfileResponse
Returns information about the specified package group from a software source.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetPackageGroupResponse
Returns information about the specified software package.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetSoftwarePackageResponse
Returns information about the specified software package based on its fully qualified name. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetSoftwarePackageByNameResponse
Returns information about the specified software source. This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetSoftwareSourceResponse
Gets the waiters available for resources for this service.
The service waiters.
Lists software packages available through the OS Management Hub service. Filter the list against a variety of criteria including but not limited to its name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListAllSoftwarePackagesResponse
Lists entitlements in the specified tenancy OCID. Filter the list against a variety of criteria including but not limited to its Customer Support Identifier (CSI), and vendor name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListEntitlementsResponse
Lists all of the currently available errata. Filter the list against a variety of criteria including but not limited to its name, classification type, advisory severity, and OS family.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListErrataResponse
Lists module stream profiles from the specified software source OCID. Filter the list against a variety of criteria including but not limited to its module name, stream name, and profile name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListModuleStreamProfilesResponse
Lists module streams from the specified software source OCID. Filter the list against a variety of criteria including but not limited to its module name and (stream) name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListModuleStreamsResponse
Lists package groups that are associated with the specified software source OCID. Filter the list against a variety of criteria including but not limited to its name, and package group type.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListPackageGroupsResponse
Lists the software sources in the tenancy that contain the software package. Filter the list against a variety of criteria including but not limited to its name, type, architecture, and OS family.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListSoftwarePackageSoftwareSourcesResponse
Lists software packages in the specified software source. Filter the list against a variety of criteria including but not limited to its name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListSoftwarePackagesResponse
Lists available software source vendors. Filter the list against a variety of criteria including but not limited to its name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListSoftwareSourceVendorsResponse
Lists software sources that match the specified tenancy or software source OCID. Filter the list against a variety of criteria including but not limited to its name, status, architecture, and OS family.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListSoftwareSourcesResponse
Returns a list of module streams from the specified software sources. Filter the list against a variety of criteria including the module name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
SearchSoftwareSourceModuleStreamsResponse
Lists modules from a list of software sources. Filter the list against a variety of criteria including the module name.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
SearchSoftwareSourceModulesResponse
Searches the package groups from the specified list of software sources. Filter the list against a variety of criteria including but not limited to its name, and group type.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
SearchSoftwareSourcePackageGroupsResponse
Shutdown the circuit breaker used by the client when it is no longer needed
Updates the specified software source's details, including but not limited to name, description, and tags.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateSoftwareSourceResponse
This service client uses {@link common.CircuitBreaker.DefaultConfiguration} for all the operations by default if no circuit breaker configuration is defined by the user.