16 Managing LOBs: Database Administration

You must perform various administrative tasks to set up, maintain, and use a database that contains LOBs.


16.1 Database Utilities for Loading Data into LOBs

Certain utilities are recommended for bulk loading data into LOB columns as part of database setup or maintenance tasks.

The following utilities are recommended for bulk loading data into LOB columns as part of database setup or maintenance tasks:

  • SQL*Loader

  • Oracle Data Pump


    Application Developers: If you are loading data into a LOB in your application, then using the LOB APIs is recommended. See Using LOB APIs .

16.1.1 About Using SQL*Loader to Load LOBs

There are two general techniques for using SQL*Loader to load data into LOBs

You can use SQL*Loader to load data into LOBs in these ways:

  • Loading data from a primary data file

  • Loading from a secondary data file using LOB files

Consider the following issues when loading LOBs with SQL*Loader:

  • For SQL*Loader conventional path loads, failure to load a particular LOB does not result in the rejection of the record containing that LOB; instead, the record ends up containing an empty LOB.

    For SQL*Loader direct-path loads, the LOB could be empty or truncated. LOBs are sent in pieces to the server for loading. If there is an error, then the LOB piece with the error is discarded and the rest of that LOB is not loaded. In other words, if the entire LOB with the error is contained in the first piece, then that LOB column is either empty or truncated.

  • When loading from LOB files, specify the maximum length of the field corresponding to a LOB-type column. If the maximum length is specified, then it is taken as a hint to help optimize memory usage. It is important that the maximum length specification does not underestimate the true maximum length.

  • When using SQL*Loader direct-path load, loading LOBs can take up substantial memory. If the message "SQL*Loader 700 (out of memory)" appears when loading LOBs, then internal code is probably batching up more rows in each load call than can be supported by your operating system and process memory. A work-around is to use the ROWS option to read a smaller number of rows in each data save.

  • You can also use the Direct Path API to load LOBs.

  • Using LOB files is recommended when loading columns containing XML data in CLOBs or XMLType columns. Consider the following validation criteria for XML documents in determining whether to use direct-path load or conventional path load with SQL*Loader:

    • If the XML document must be validated upon loading, then use conventional path load.

    • If it is not necessary to ensure that the XML document is valid, or if you can safely assume that the XML document is valid, then you can perform a direct-path load. Direct-path load performs better because you avoid the overhead of XML validation.

    A conventional path load executes SQL INSERT statements to populate tables in an Oracle database.

    A direct-path load eliminates much of the Oracle database overhead by formatting Oracle data blocks and writing the data blocks directly to the database files. Additionally, it does not compete with other users for database resources, so it can usually load data at near disk speed. Considerations inherent to direct path loads, such as restrictions, security, and backup implications, are discussed in Oracle Database Utilities.

  • Tables to be loaded must already exist in the database. SQL*Loader never creates tables. It loads existing tables that either contain data or are empty.

  • The following privileges are required for a load:

    • You must have INSERT privileges on the table to be loaded.

    • You must have DELETE privileges on the table to be loaded, when using the REPLACE or TRUNCATE option to empty out the old data before loading the new data in its place.

      See Also:

16.1.2 About Using SQL*Loader to Populate a BFILE Column

You can load data from files in the file system into a BFILE column.

You can load data from files in the file system into a BFILE column.

Note that the BFILE data type stores unstructured binary data in operating system files outside the database. A BFILE column or attribute stores a file locator that points to a server-side external file containing the data.


A particular file to be loaded as a BFILE does not have to actually exist at the time of loading.

SQL*Loader assumes that the necessary DIRECTORY objects have been created.

See Also:

See "Directory Objects" and the sections following it for more information on creating directory objects

A control file field corresponding to a BFILE column consists of the column name followed by the BFILE directive.

The BFILE directive takes as arguments a DIRECTORY object name followed by a BFILE name. Both of these can be provided as string constants, or they can be dynamically sourced through some other field.

See Also:

Oracle Database Utilities for details on SQL*Loader syntax

The following two examples illustrate the loading of BFILEs.


You may be required to set up the following data structures for certain examples to work (you are prompted for the password):

CONNECT system
Enter password:
Enter password:
CREATE OR REPLACE DIRECTORY adgraphic_photo as '/tmp';
CREATE OR REPLACE DIRECTORY adgraphic_dir as '/tmp';

In the following example based on the "Table for LOB Examples: The PM Schema print_media Table", only the file name is specified dynamically.

Control file:

INFILE sample9.dat
INTO TABLE Print_media
(product_id  INTEGER EXTERNAL(6),
 FileName    FILLER CHAR(30),
 ad_graphic  BFILE(CONSTANT "modem_graphic_2268_21001", FileName))

Data file:

007, modem_2268.jpg,
008, monitor_3060.jpg,
009, keyboard_2056.jpg,


product_ID defaults to (255) if a size is not specified. It is mapped to the file names in the data file. ADGRAPHIC_PHOTO is the directory where all files are stored. ADGRAPHIC_DIR is a DIRECTORY object created previously.

In the following example, the BFILE and the DIRECTORY objects are specified dynamically.

Control file:

INFILE sample10.dat
INTO TABLE Print_media
 product_id INTEGER EXTERNAL(6),
 ad_graphic BFILE (DirName, FileName),
 FileName  FILLER CHAR(30),
 DirName   FILLER CHAR(30)

Data file:



DirName FILLER CHAR (30) is mapped to the data file field containing the directory name corresponding to the file being loaded.

16.1.3 About Using Oracle Data Pump to Transfer LOB Data

You can use Oracle Data Pump to transfer LOB data from one database to another.

Oracle Data Pump can transfer LOB data from one database to another.

Beginning with Oracle Database 12c, Data Pump has an option to create all LOB columns as SecureFiles LOBs.

See Also:

"SecureFiles LOB Storage" for an introduction to SecureFiles LOBs

When Data Pump recreates tables, however, it recreates them as they existed in the source database, by default. Therefore, if a LOB column was a BasicFiles LOB in the source database, Data Pump attempts to recreate it as a BasicFiles LOB in the imported database. You can force creation of LOBs as SecureFiles LOBs in the tables being recreated using a TRANSFORM parameter for the command line or a LOB_STORAGE parameter for the DBMS_DATAPUMP and DBMS_METADATA packages.


The transform name is not valid in transportable import.

See Also:

16.2 Temporary LOB Management

The database keeps track of temporary LOBs in each session, and the application can determine which user owns the temporary LOB by using the session ID.

The database provides a v$ view called v$temporary_lobs. As a database administrator, you can use this view to monitor and guide any emergency cleanup of temporary space used by temporary LOBs.

Temporary LOB data is stored in temporary tablespaces. As a database administrator, you control data storage resources for temporary LOB data by controlling user access to temporary tablespaces and by the creation of different temporary tablespaces.

See Also:

Oracle Database Administrator's Guide for details on managing temporary tablespaces

16.3 BFILEs Management

You need to perform various administrative tasks to manage databases that contain BFILEs.


16.3.1 Rules for Using Directory Objects and BFILEs

You can create a directory object or BFILE objects if these conditions are met.

When you create a directory object or BFILE objects, ensure that the following conditions are met:

  • The operating system file must not be a symbolic or hard link.

  • The operating system directory path named in the Oracle DIRECTORY object must be an existing operating system directory path.

  • The operating system directory path named in the Oracle DIRECTORY object should not contain any symbolic links in its components.

16.3.2 Setting Maximum Number of Open BFILEs

A limited number of BFILEs can be open simultaneously in each session.

The initialization parameter, SESSION_MAX_OPEN_FILES, defines an upper limit on the number of simultaneously open files in a session.

The default value for this parameter is 10. Using this default, you can open a maximum of 10 files at the same time in each session. To alter this limit, the database administrator must change the parameter value in the init.ora file. For example:


If the number of unclosed files reaches the SESSION_MAX_OPEN_FILES value, then you cannot open additional files in the session. To close all open files, use the DBMS_LOB.FILECLOSEALL call.

16.4 Changing Tablespace Storage for a LOB

Database administrators use certain techniques to change the default storage for a LOB.

As the database administrator, you can use the following techniques to change the default storage for a LOB after the table has been created:

  • Using ALTER TABLE... MODIFY: You can change LOB tablespace storage as follows:

  LOB (lob1)
    STORAGE  (
    NEXT         4M
    MAXEXTENTS   100


The ALTER TABLE syntax for modifying an existing LOB column uses the MODIFY LOB clause, not the LOB...STORE AS clause. The LOB...STORE AS clause is only for newly added LOB columns.

There are two kinds of LOB storage clauses: LOB_storage_clause and modify_LOB_storage_clause. In the ALTER TABLE MODIFY LOB statement, you can only specify the modify_LOB_storage_clause.

  • Using ALTER TABLE... MOVE: You can also use the MOVE clause of the ALTER TABLE statement to change LOB tablespace storage. For example:

    LOB (lob1, lob2)
    STORE AS (
          TABLESPACE tbs2