6 Type Support

This chapter documents data types supported by the Oracle SQLJ implementation, listing supported SQL types and the Java types that correspond to them. This is followed by details about support for streams and Oracle type extensions. SQLJ support of Java types refers to types that can be used in host expressions.

This chapter covers the following topics:

Supported Types for Host Expressions

This section summarizes the types supported by the Oracle SQLJ implementation, including information about new support for Java Database Connectivity (JDBC) 2.0 types.

See Also:

Oracle Database JDBC Developer's Guide for a complete list of legal Java mappings for each Oracle SQL type

Note:

SQLJ performs implicit conversions between SQL and Java types. Although this is generally useful and helpful, it can produce unexpected results. Do not rely on translation-time type-checking alone to ensure the correctness of your code.

This section covers the following topics:

Summary of Supported Types

Table 6-1 lists the Java types that you can use in host expressions when employing Oracle JDBC drivers. This table also documents the correlation between Java types, SQL types whose type codes are defined in the oracle.jdbc.OracleTypes class, and data types in Oracle Database 12c Release 2 (12.2).

Note:

The OracleTypes class simply defines a type code, which is an integer constant, for each Oracle data type. For standard JDBC types, the OracleTypes value is identical to the standard java.sql.Types value.

SQL data output to a Java variable is converted to the corresponding Java type. A Java variable input to SQL is converted to the corresponding Oracle data type.

Table 6-1 Type Mappings for Supported Host Expression Types

Java Type OracleTypes Definition Oracle SQL Data Type

STANDARD JDBC 1.x TYPES

 

 

boolean

BIT

NUMBER

byte

TINYINT

NUMBER

short

SMALLINT

NUMBER

int

INTEGER

NUMBER

long

BIGINT

NUMBER

float

REAL

NUMBER

double

FLOAT, DOUBLE

NUMBER

java.lang.String

CHAR VARCHAR LONGVARCHAR

CHAR VARCHAR2 LONG

byte[]

BINARY VARBINARY LONGVARBINARY

RAW RAW LONGRAW

java.sql.Date

DATE

DATE

java.sql.Time

TIME

DATE

java.sql.Timestamp

TIMESTAMP TIMESTAMP

DATE TIMESTAMP

java.math.BigDecimal

NUMERIC DECIMAL

NUMBER NUMBER

STANDARD JDBC 2.0 TYPES

 

 

java.sql.Blob

BLOB

BLOB

java.sql.Clob

CLOB

CLOB

java.sql.Struct

STRUCT

Object types

java.sql.Ref

REF

Reference types

java.sql.Array

ARRAY

Collection types

Custom object classes implementing java.sql.SQLData

STRUCT

Object types

JAVA WRAPPER CLASSES

 

 

java.lang.Boolean

BIT

NUMBER

java.lang.Byte

TINYINT

NUMBER

java.lang.Short

SMALLINT

NUMBER

java.lang.Integer

INTEGER

NUMBER

java.lang.Long

BIGINT

NUMBER

java.lang.Float

REAL

NUMBER

java.lang.Double

FLOAT, DOUBLE

NUMBER

SQLJ STREAM CLASSES

 

 

sqlj.runtime.BinaryStream

LONGVARBINARY

LONG RAW

sqlj.runtime.CharacterStream

LONGVARCHAR

LONG

sqlj.runtime.AsciiStream (Deprecated; use CharacterStream.)

LONGVARCHAR

LONG

sqlj.runtime.UnicodeStream (Deprecated; use CharacterStream.)

LONGVARCHAR

LONG

ORACLE EXTENSIONS

 

 

oracle.sql.NUMBER

NUMBER

NUMBER

oracle.sql.CHAR

CHAR

CHAR

oracle.sql.RAW

RAW

RAW

oracle.sql.DATE

DATE

DATE

oracle.sql.TIMESTAMP

TIMESTAMP

TIMESTAMP

oracle.sql.TIMESTAMPTZ

TIMESTAMPTZ

TIMESTAMP-WITH- TIMEZONE

oracle.sql.TIMESTAMPLTZ

TIMESTAMPLTZ

TIMESTAMP-WITH- LOCAL-TIMEZONE

oracle.sql.ROWID

ROWID

ROWID

oracle.sql.BLOB

BLOB

BLOB

oracle.sql.CLOB

CLOB

CLOB

oracle.sql.BFILE

BFILE

BFILE

oracle.sql.STRUCT

STRUCT

Object types

oracle.sql.REF

REF

Reference types

oracle.sql.ARRAY

ARRAY

Collection types

oracle.sql.OPAQUE

OPAQUE

OPAQUE types

Custom object classes implementing oracle.sql.ORAData

STRUCT

Object types

Custom reference classes implementing oracle.sql.ORAData

REF

Reference types

Custom collection classes implementing oracle.sql.ORAData

ARRAY

Collection types

Custom classes implementing oracle.sql.ORAData for OPAQUE types (for example, oracle.xdb.XMLType)

OPAQUE

OPAQUE types

Other custom Java classes implementing oracle.sql.ORAData (to wrap any oracle.sql type)

Any

Any

SQLJ object Java types (can implement either SQLData or ORAData)

JAVA_STRUCT

SQLJ object SQL types (JAVA_STRUCT behind the scenes; automatic conversion to an appropriate Java class)

JAVA TYPES FOR PL/SQL TYPES

 

 

Scalar indexed-by table represented by a Java numeric array or an array of String, oracle.sql.CHAR, or oracle.sql.NUMBER

NA

NA

Note: There is a PLSQL_INDEX_TABLE type, but it does not appear to be used externally.

GLOBALIZATION SUPPORT

 

 

oracle.sql.NCHAR

CHAR

CHAR

oracle.sql.NString

CHAR VARCHAR LONGVARCHAR

CHAR VARCHAR2 LONG

oracle.sql.NCLOB

CLOB

CLOB

oracle.sqlj.runtime.NcharCharacterStream

LONGVARCHAR

LONG

oracle.sqlj.runtime. NcharAsciiStream (Deprecated; use NcharCharacterStream.)

LONGVARCHAR

LONG

oracle.sqlj.runtime. NcharUnicodeStream (Deprecated; use NcharCharacterStream.)

LONGVARCHAR

LONG

QUERY RESULT OBJECTS

 

 

java.sql.ResultSet

CURSOR

CURSOR

SQLJ iterator objects

CURSOR

CURSOR

See Also:

Oracle Database JDBC Developer's Guide for more information about Oracle type support.

The following points relate to type support for standard features:

  • JDBC and SQLJ do not support Java char and Character types. Instead, use the Java String type to represent character data.

  • Do not confuse the supported java.sql.Date type with java.util.Date, which is not directly supported. The java.sql.Date class is a wrapper for java.util.Date that enables JDBC to identify the data as a SQL DATE and adds formatting and parsing operations to support JDBC escape syntax for date values.

  • Remember that all numeric types in Oracle Database 12c Release 2 (12.2) are stored as NUMBER. Although you can specify additional precision when you declare a NUMBER during table creation, this precision may be lost when retrieving the data through Oracle JDBC drivers, depending on the Java type that you use to receive the data. An oracle.sql.NUMBER instance would preserve full information.

  • The Java wrapper classes, such as Integer and Float, are useful in cases where NULL may be returned by the SQL statement. Primitive types, such as int and float, cannot contain null values.

    See Also:

    "NULL-Handling"

  • The SQLJ stream classes are required in using streams as host variables.

    See Also:

    "Support for Streams"

  • Weak types cannot be used for OUT or INOUT parameters. This applies to the Struct, Ref, and Array standard JDBC 2.0 types, as well as to corresponding Oracle extended types.

  • A new set of interfaces, in the oracle.jdbc package, was first added in the Oracle9i JDBC implementation in place of classes of the oracle.jdbc.driver package. These interfaces provide a more generic way for users to access Oracle-specific features using Oracle JDBC drivers. Specifically, when creating programs for the middle tier, you should use the oracle.jdbc application programming interface (API). However, SQLJ programmers will not typically use these interfaces directly. They are used transparently by the SQLJ run time or in Oracle-specific generated code.

  • For information about SQLJ support for result set and iterator host variables, refer to "Using Iterators and Result Sets as Host Variables"Using Iterators and Result Sets as Stored Function Returns.

The following points relate to Oracle extensions:

  • The Oracle SQLJ implementation requires any class that implements oracle.sql.ORAData to set the static _SQL_TYPECODE parameter according to values defined in the OracleTypes class. In some cases, an additional parameter must be set as well, such as _SQL_NAME for objects and _SQL_BASETYPE for object references.

  • The oracle.sql classes are wrappers for SQL data for each of the Oracle data types. The ARRAY, STRUCT, REF, BLOB, and CLOB classes correspond to standard JDBC 2.0 interfaces.

    See Also:

    Oracle Database JDBC Developer's Guide for information about these classes and Oracle extensions

  • Custom Java classes can map to Oracle objects, which implement ORAData or SQLData, references, which implement ORAData only, collections, which implement ORAData only, OPAQUE types, which implement ORAData only, or other SQL types for customized handling, which implement ORAData only.

  • The Oracle SQLJ implementation has functionality for automatic blank padding when comparing a string to a CHAR column value for a WHERE clause. Otherwise the string would have to be padded to match the number of characters in the database column. This is available as a SQLJ translator option for Oracle-specific code generation, or as an Oracle customizer option for ISO standard code generation.

  • Weak types cannot be used for OUT or INOUT parameters. This applies to the STRUCT, REF, and ARRAY Oracle extended types and corresponding standard JDBC 2.0 types, as well as to Oracle OPAQUE types.

  • Using any of the Oracle extensions requires the following:

    • Oracle JDBC driver

    • Oracle-specific code generation or Oracle customization during translation

    • Oracle SQLJ run time when your application runs

Supported Types and Requirements for JDBC 2.0

As indicated in Table 6-1, the Oracle JDBC and SQLJ implementations support JDBC 2.0 types in the standard java.sql package. This section lists JDBC 2.0 supported types and related Oracle extensions.

Table 6-2 lists the JDBC 2.0 types supported by the Oracle SQLJ implementation. You can use them wherever you can use the corresponding Oracle extensions, summarized in the table.

The Oracle extensions have been available in prior releases and are still available as well. These oracle.sql.* classes provide functionality to wrap raw SQL data.

Table 6-2 Correlation between Oracle Extensions and JDBC 2.0 Types

JDBC 2.0 Type Oracle Extension

java.sql.Blob

oracle.sql.BLOB

java.sql.Clob

oracle.sql.CLOB

java.sql.Struct

oracle.sql.STRUCT

java.sql.Ref

oracle.sql.REF

java.sql.Array

oracle.sql.ARRAY

java.sql.SQLData

NA

NA

oracle.sql.ORAData (_SQL_TYPECODE = OracleTypes.STRUCT)

ORAData functionality is an Oracle-specific alternative to standard SQLData functionality for Java support of user-defined types.

The following JDBC 2.0 types are currently not supported in the Oracle JDBC and SQLJ implementations:

  • JAVA_OBJECT: Represents an instance of a Java type in a SQL column.

  • DISTINCT: A distinct SQL type represented in or retrievable from a basic SQL type. For example, SHOESIZE --> NUMBER.

Note:

Beginning with Oracle Database 11g, the Oracle SQLJ implementation supports the ISO SQLJ feature of allowing array types for iterator columns. You can declare an iterator that uses java.sql.Array or oracle.sql.ARRAY columns. For example, suppose the following database table is defined:

CREATE OR REPLACE TYPE arr_type IS VARRAY(20) OF NUMBER;
CREATE TABLE arr_type (arr_col1 arr_type, arr_col2
                       arr_type);

You could define a corresponding iterator type as follows:

#sql static iterator MyIter (oracle.sql.ARRAY arr_col1,
                             java.sql.Array arr_col2);

Using PL/SQL BOOLEAN, RECORD Types, and TABLE Types

The Oracle SQLJ and JDBC implementations do not support calling arguments or return values of the PL/SQL BOOLEAN type or RECORD types.

Support for TABLE Types

Oracle JDBC drivers support scalar PL/SQL indexed-by tables.

The Oracle SQLJ implementation simplifies the process of writing and retrieving data in scalar indexed-by tables. The following array types are supported:

  • Numeric types: int[], long[], float[], double[], short[], java.math.BigDecimal[], oracle.sql.NUMBER[]

  • Character types: java.lang.String[], oracle.sql.CHAR[]

The following is an example of writing indexed-by table data to the database:

int[] vals = {1,2,3};
#sql { call procin(:vals) };

The following is an example of retrieving indexed-by table data from the database:

oracle.sql.CHAR[] outvals;
#sql { call procout(:OUT outvals/*[111](22)*/) };

You must specify the maximum length of the output array being retrieved, using the [xxx] syntax inside the /*...*/ syntax, as shown. Also, for character-like binds, you can optionally include the (xx) syntax, as shown, to specify the maximum length of an array element in bytes.

Note:

The oracle.sql.Datum class is not supported directly. You must use an appropriate subclass, such as oracle.sql.CHAR or oracle.sql.NUMBER.

Workarounds for Unsupported Types

As a workaround for an unsupported type, you can create wrapper procedures that process the data using supported types. For example, to wrap a stored procedure that uses PL/SQL boolean values, you can create a stored procedure that takes a character or number from JDBC and passes it to the original procedure as BOOLEAN, or for an output parameter, accepts a BOOLEAN argument from the original procedure and passes it as a CHAR or NUMBER to JDBC. Similarly, to wrap a stored procedure that uses PL/SQL records, you can create a stored procedure that handles a record in its individual components, such as CHAR and NUMBER. To wrap a stored procedure that uses PL/SQL TABLE types, you can break the data into components or perhaps use Oracle collection types.

The following is an example of a PL/SQL wrapper procedure MY_PROC for a stored procedure PROC that takes a BOOLEAN as input:

PROCEDURE MY_PROC (n NUMBER) IS
BEGIN
   IF n=0
      THEN proc(false);
      ELSE proc(true);
   END IF;
END;

PROCEDURE PROC (b BOOLEAN) IS
BEGIN
...
END;

Backward Compatibility for Previous Oracle JDBC Releases

This section summarizes backward compatibility issues when using the Oracle SQLJ implementation with earlier Oracle JDBC releases.

In Oracle Database 11g release 1 (11.1), SQLJ fully supports applications developed in Oracle9i Database and Oracle Database 10g release 1 (10.1). However, in Oracle Database 11g release 1 (11.1), JDBC resources are no longer closed by the SQLJ run time resource finalizers. Therefore, some applications developed prior to Oracle Database 11g release 1 (11.1) may observe JDBC connection and statement leaking. To prevent such leaking, you must properly close all the SQLJ run-time resources, such as connection context, execution context, and iterator, in your SQLJ applications.

Note:

Oracle9i release 2 first added support for OPAQUE types and TIMESTAMP types.

Backward Compatibility for Oracle8i Database

The following Oracle Database 11g features, which are also available in Oracle9i Database, are not supported or supported differently in the Oracle8i JDBC drivers:

  • The oracle.sql.ORAData and ORADataFactory interfaces for Java mapping of user-defined SQL types

    Use the oracle.sql.CustomDatum and CustomDatumFactory interfaces instead.

  • Oracle extensions for character types for globalization support: NCHAR, NCLOB, NString, and NcharCharacterStream (or NcharAsciiStream and NcharUnicodeStream in earlier releases)

Support for Streams

Standard SQLJ provides the following specialized classes for convenient processing of long data in streams:

  • sqlj.runtime.BinaryStream

  • sqlj.runtime.CharacterStream

These stream types can be used for iterator columns to retrieve data from the database or for input host variables to send data to the database. As with Java streams in general, these classes allow the convenience of processing and transferring large data items in manageable chunks.

This section discusses general use of these classes, Oracle SQLJ extended functionality, and stream class methods. It covers the following topics:

Note:

Starting from JDBC 2.0, the CharacterStream class replaces the AsciiStream and UnicodeStream classes. CharacterStream shelters users from unnecessary logistics regarding encoding.

General Use of SQLJ Streams

Table 6-1 lists the data types you would typically process using these stream classes. To summarize:

  • BinaryStream is typically used for LONG RAW (Types.LONGVARBINARY), but might also be used for RAW (Types.BINARY or Types.VARBINARY).

  • CharacterStream is typically used for LONG (java.sql.Types.LONGVARCHAR), but might also be used for VARCHAR2 (Types.VARCHAR).

Of course, any use of streams is at your discretion. You can use the SQLJ stream types for host variables to either send or retrieve data.

As Table 6-1 documents, LONG and VARCHAR2 data can also be manifested in Java String, while RAW and LONGRAW data can also be manifested in Java byte[] arrays. Also, if your database supports large object types, such as BLOB and CLOB, then you may find these to be preferable to types like LONG and LONG RAW, although streams might still be used in extracting data from large objects. The Oracle SQLJ and JDBC implementations support large object types.

Both SQLJ stream classes are subclasses of standard Java classes, java.io.InputStream for BinaryStream and java.io.Reader for CharacterStream, and act as wrappers to provide the functionality required by SQLJ. This functionality is to communicate to SQLJ the type and length of the underlying data so that it can be processed and formatted properly.

Key Aspects of Stream Support Classes

The following abbreviated code illustrates key aspects of the BinaryStream class, such as what it extends, constructor signatures, and key method signatures:

public class sqlj.runtime.BinaryStream extends sqlj.runtime.StreamWrapper
{   public sqlj.runtime.BinaryStream(java.io.InputStream);
    public sqlj.runtime.BinaryStream(java.io.InputStream,int);
    public java.io.InputStream getInputStream();
    public int getLength();
    public void setLength(int);
}

The following abbreviated code illustrates key aspects of the CharacterStream class:

public class sqlj.runtime.CharacterStream extends java.io.FilterReader
{   public sqlj.runtime.CharacterStream(java.io.Reader);
    public sqlj.runtime.CharacterStream(java.io.Reader,int);
    public int getLength();
    public java.io.Reader getReader();
    public void setLength(int);
}

Note:

  • The int parameters in the constructors are for data length, in bytes or characters as applicable.

  • For any method that takes a java.io.InputStream object as input, you can use a BinaryStream object instead. Similarly, for any method that takes a java.io.Reader object as input, you can use a CharacterStream object instead.

  • The deprecated AsciiStream and UnicodeStream classes have the same key aspects and signatures as BinaryStream.

Using SQLJ Streams to Send Data

Standard SQLJ enables you to use streams as host variables to update the database. A key point in sending a SQLJ stream to the database is that you must somehow determine the length of the data and specify that length to the constructor of the SQLJ stream.

You can use a SQLJ stream to send data to the database as follows:

  1. Determine the length of the data.

  2. Create an appropriate standard Java data object for input. For BinaryStream, this would be an input stream, an instance of java.io.InputStream or some subclass. For CharacterStream, this would be a reader object, an instance of java.io.Reader or some subclass.

  3. Create an instance of the appropriate SQLJ stream class depending on the type of data, passing the data object and length to the constructor.

  4. Use the SQLJ stream instance as a host variable in a suitable SQL operation in a SQLJ executable statement.

  5. Close the stream.

Note:

Although not required, it is recommended that you close the stream after using it.

Updating LONG or LONG RAW from a File

This section illustrates how to create a CharacterStream object or a BinaryStream object from a File object and use it to update the database. The code example at the end uses a CharacterStream for a LONG column.

In updating a database column from a file, a step is needed to determine the length. You can do this by creating a java.io.File object before you create your input stream.

Following are the steps for updating the database from a file:

  1. Create a java.io.File object from your file. You can specify the file path name to the File class constructor.

  2. Use the length() method of the File object to determine the length of the data. This method returns a long value, which you must cast to an int for input to the SQLJ stream class constructor.

    Note:

    Before performing this cast, test the long value to ensure that it is not too big to fit into an int variable. The static constant MAX_VALUE in the class java.lang.Integer indicates the largest possible Java int value.

  3. For character data, create a java.io.FileReader object from the File object. You can pass the File object to the FileReader constructor.

    For binary data, create a java.io.FileInputStream object from the File object. You can pass the File object to the FileInputStream constructor.

  4. Create an appropriate SQLJ stream object. This would be a CharacterStream object for a character file or a BinaryStream object for a binary file. Pass the FileReader or FileInputStream object, as applicable, and the data length as an int to the SQLJ stream class constructor.

  5. Use the SQLJ stream object as a host variable in an appropriate SQL operation in a SQLJ executable statement.

The following is an example of writing LONG data to the database from a file. Presume you have an HTML file in /private/mydir/myfile.html and want to insert the file contents into a LONG column, chardata, in the filetable database table.

import java.io.*;
import sqlj.runtime.*;

...
File myfile = new File ("/private/mydir/myfile.html");
int length = (int)myfile.length();     // Must cast long output to int.
FileReader filereader = new FileReader(myfile);
CharacterStream charstream = new CharacterStream(filereader, length);
#sql { INSERT INTO filetable (chardata) VALUES (:charstream) };
charstream.close();
...

Updating LONG RAW from a Byte Array

This section illustrates how to create a BinaryStream object from a byte array and uses it to update the database.

You must determine the length of the data before updating the database from a byte array. This is more trivial for arrays than for files, though, because all Java arrays have functionality to return the length.

Following are the steps in updating the database from a byte array:

  1. Use the length functionality of the array to determine the length of the data. This returns an int, which is what you will need for the constructor of any of the SQLJ stream classes.
  2. Create a java.io.ByteArrayInputStream object from your array. You can pass the byte array to the ByteArrayInputStream constructor.
  3. Create a BinaryStream object. Pass the ByteArrayInputStream object and data length as an int to the BinaryStream class constructor.

    The constructor signature is as follows:

    BinaryStream (InputStream in, int length)
    

    You can use an instance of java.io.InputStream or of any subclass, such as the ByteArrayInputStream class.

  4. Use the SQLJ stream object as a host variable in an appropriate SQL operation in a SQLJ executable statement.

The following is an example of writing LONG RAW data to the database from a byte array. Presume you have a byte array, bytearray[], and you want to insert its contents into a LONG RAW column, BINDATA, in the BINTABLE database table.

import java.io.*;
import sqlj.runtime.*;

...
byte[] bytearray = new byte[100];

(Populate bytearray somehow.)
...
int length = bytearray.length;
ByteArrayInputStream arraystream = new ByteArrayInputStream(bytearray);
BinaryStream binstream = new BinaryStream(arraystream, length);
#sql { INSERT INTO bintable (bindata) VALUES (:binstream) };
binstream.close();
...

Note:

It is not necessary to use a stream as in this example. Alternatively, you can update the database directly from a byte array.

Retrieving Data into Streams: Precautions

You can also use the SQLJ stream classes to retrieve data, but the logistics of using streams make certain precautions necessary with some database products. When reading long data and writing it to a stream using Oracle Database 12c Release 2 (12.2) and an Oracle JDBC driver, you must be careful in how you access and process the stream data.

As Oracle JDBC drivers access data from an iterator row, they must flush any stream item from the communications pipe before accessing the next data item. Even though the stream data is written to a local stream while the iterator row is processed, this stream data will be lost if you do not read it from the local stream before the JDBC driver accesses the next data item. This is because of the manner in which streams must be processed, which is due to their potentially large size and unknown length.

Therefore, as soon as your Oracle JDBC driver has accessed a stream item and written it to a local stream variable, you must read and process the local stream before anything else is accessed from the iterator.

This is especially problematic in using positional iterators, with their requisite FETCH INTO syntax. With each fetch, all columns are read before any are processed. Therefore, there can be only one stream item and it must be the last item accessed.

The precautions you must take can be summarized as follows:

  • When using a positional iterator, you can have only one stream column and it must be the last column. As soon as you have fetched each row of the iterator, writing the stream item to a local input stream variable in the process, you must read and process the local stream variable before advancing to the next row of the iterator.

  • When using a named iterator, you can have multiple stream columns. However, as you process each iterator row, each time you access a stream field, writing the data to a local stream variable in the process, you must read and process the local stream immediately, before reading anything else from the iterator.

    Furthermore, in processing each row of a named iterator, you must call the column accessor methods in the same order in which the database columns were selected in the query that populated the iterator. As mentioned in the preceding discussion, this is because stream data remains in the communications pipe after the query. If you try to access columns out of order, then the stream data may be skipped over and lost in the course of accessing other columns.

Note:

  • Oracle Database 12c Release 2 (12.2) and Oracle JDBC drivers do not support use of streams in SELECT INTO statements.

  • Input streams, by default, do not support mark and reset methods. If you pass any arbitrary input stream to the constructor, then the reset method of InputStream class will throw an IOException. So, always ensure that the input stream is in the proper state when passed to the NcharAsciiStream constructor. For example, reset the stream before passing it to NcharAsciiStream if the stream has no more data or if the stream is closed.

Using SQLJ Streams to Retrieve Data

To retrieve data as a stream, standard SQLJ enables you to select data into a named or positional iterator that has a column of the appropriate SQLJ stream type.

This section covers the basic steps in retrieving data into a SQLJ stream using a positional iterator or a named iterator, taking into account the precautions documented in the preceding section.

Using a SQLJ Stream Column in a Positional Iterator

Use the following steps to retrieve data into a SQLJ stream using a positional iterator:

  1. Declare a positional iterator class with the last column being of the appropriate SQLJ stream type.

  2. Declare a local variable of your iterator type.

  3. Declare a local variable of the appropriate SQLJ stream type. This will be used as a host variable to receive data from each row of the SQLJ stream column of the iterator.

  4. Execute a query to populate the iterator you declared in Step 2.

  5. Process the iterator as usual. Because the host variables in the INTO-list of the FETCH INTO statement must be in the same order as the columns of the positional iterator, the local input stream variable is the last host variable in the list.

  6. In the iterator processing loop, after each iterator row is accessed, immediately read and process the local input stream, storing or printing the stream data as desired.

  7. Close the local input stream each time through the iterator processing loop.

  8. Close the iterator.

Note:

Although not required, it is recommended that you close the local input stream each time through the iterator processing loop.

<<<[for 11g?] Use code examples. >>>

Using SQLJ Stream Columns in a Named Iterator

Use the following steps to retrieve data into one or more SQLJ streams using a named iterator:

  1. Declare a named iterator class with one or more columns of appropriate SQLJ stream type.
  2. Declare a local variable of your iterator type.
  3. Declare a local variable of some input stream or reader type for each SQLJ stream column in the iterator. These will be used to receive data from the stream-column accessor methods. These local stream variables need not be of the SQLJ stream types. They can be standard java.io.InputStream or java.io.Reader, as applicable.

    Note:

    The local stream variables need not be of the SQLJ stream types, because the data was already correctly formatted as a result of the iterator columns being of appropriate SQLJ stream types.

  4. Execute a query to populate the iterator you declared in Step 2.
  5. Process the iterator as usual. In processing each row of the iterator, as each stream-column accessor method returns the stream data, write it to the corresponding local input stream variable you declared in Step 3.

    To ensure that stream data will not be lost, call the column accessor methods in the same order in which columns were selected in the query in Step 4.

  6. In the iterator processing loop, immediately after calling the accessor method for any stream column and writing the data to a local input stream variable, read and process the local input stream, storing or printing the stream data as desired.
  7. Close the local input stream each time through the iterator processing loop.
  8. Close the iterator.

<<<[for 11g?] Use code examples. >>>

Note:

  • When you populate a SQLJ stream object with data, the length attribute of the stream will not be meaningful. This attribute is meaningful only when you set it explicitly, either using the setLength() method that each SQLJ stream class provides or specifying the length to the constructor.

  • Although not required, it is recommended that you close the local input stream each time through the iterator processing loop.

Stream Class Methods

In processing a SQLJ stream column in a named or positional iterator, the local stream variable used to receive the stream data can be either a SQLJ stream type or the standard java.io.InputStream or java.io.Reader type, as applicable. In either case, standard methods of the input data object are supported.

If the local stream variable is a SQLJ stream type, BinaryStream or CharacterStream, you have the option of either reading data directly from the SQLJ stream object or retrieving the underlying InputStream or Reader object and reading data from that.

Note:

This is just a matter of preference. The former approach is simpler. However, the latter approach involves more direct and efficient data access.

Binary Stream Methods

The BinaryStream class is a subclass of the sqlj.runtime.StreamWrapper class. The StreamWrapper class provides the following key methods:

  • InputStream getInputStream(): You can optionally use this method to get the underlying java.io.InputStream object. However, this is not required, because you can also process SQLJ stream objects directly.

  • void setLength(int length): You can use this to set the length attribute of a SQLJ stream object. This is not necessary if you have already set length in constructing the stream object, unless you want to change it for some reason.

    The length attribute must be set to an appropriate value before you send a SQLJ stream to the database.

  • int getLength(): This method returns the value of the length attribute of a SQLJ stream. This value is meaningful only if you explicitly set it using the stream object constructor or the setLength() method. When you retrieve data into a stream, the length attribute is not set automatically.

The sqlj.runtime.StreamWrapper class is a subclass of the java.io.FilterInputStream class, which is a subclass of the java.io.InputStream class. The following important methods of the InputStream class are supported by the SQLJ BinaryStream class as well:

  • int read (): Reads the next byte of data from the input stream. The byte of data is returned as an int value in the range 0 to 255. If the end of the stream has already been reached, then the value -1 is returned. This method blocks program execution until one of the following:

    • Input data is available

    • The end of the stream is detected

    • An exception is thrown

  • int read (byte b[]): Reads up to b.length bytes of data from the input stream, writing the data into the specified b[] byte array. It returns an int value indicating how many bytes were read, or -1 if the end of the stream has already been reached. This method blocks program execution until input is available.

  • int read (byte b[], int off, int len): Reads up to len bytes of data from the input stream, starting at the byte specified by the offset, off, and writing the data into the specified b[] byte array. It returns an int value indicating how many bytes were read, or -1 if the end of the stream has already been reached. This method blocks until input is available.

  • long skip (long n): Skips over and discards n bytes of data from the input stream. However, in some circumstances, this method will actually skip a smaller number of bytes. It returns a long value indicating the actual number of bytes skipped.

  • void close(): Closes the stream and releases any associated resources.

Character Stream Methods

The CharacterStream class provides the following key methods:

  • Reader getReader(): You can optionally use this method to get the underlying java.io.Reader object. However, this is not required, because you can also process SQLJ stream objects directly.

  • void setLength(int length): You can use this method to set the length of the stream object.

  • int getLength(): You can use this method to get the length of the stream object.

The sqlj.runtime.CharacterStream class is a subclass of the java.io.FilterReader class, which is a subclass of the java.io.Reader class. The following important methods of the Reader class are supported by the SQLJ CharacterStream class as well:

  • int read (): Reads the next character of data from the reader. The data is returned as an int value in the range 0 to 65535. If the end of the data has already been reached, then the value -1 is returned. This method blocks program execution until one of the following:

    • Input data is available

    • The end of the data is detected

    • An exception is thrown

  • int read (char cbuf[]): Reads characters into an array, writing the data into the specified cbuf[] char array. It returns an int value indicating how many characters were read, or -1 if the end of the data has already been reached. This method blocks program execution until input is available.

  • int read (char cbuf[], int off, int len): Reads up to len characters of data from the input, starting at the character specified by the offset, off, and writing the data into the specified char[] char array. It returns an int value indicating how many characters were read, or -1 if the end of the data has already been reached. This method blocks until input is available.

  • long skip (long n): Skips over and discards n characters of data from the input. However, in some circumstances, this method will actually skip a smaller number of characters. It returns a long value indicating the actual number of characters skipped.

  • void close(): Closes the stream and releases any associated resources.

Examples of Retrieving and Processing Stream Data

This section provides examples of various scenarios of retrieving stream data, as follows:

  • Using a SELECT statement to select data from a LONG column and populate a SQLJ CharacterStream column in a named iterator, as shown in Example 6-1

  • Using a SELECT statement to select data from a LONG RAW column and populate a SQLJ BinaryStream column in a positional iterator, as shown in Example 6-2

Example 6-1 Selecting LONG Data into CharacterStream Column of Named Iterator

This example selects data from a LONG database column, populating a SQLJ CharacterStream column in a named iterator.

Assume there is a table named FILETABLE with a VARCHAR2 column called FILENAME that contains file names and a LONG column called FILECONTENTS that contains file contents in character format. The code is as follows:

import sqlj.runtime.*;
import java.io.*;
...
#sql iterator MyNamedIter (String filename, CharacterStream filecontents);

...
MyNamedIter namediter = null;
String fname;
CharacterStream charstream;
#sql namediter = { SELECT filename, filecontents FROM filetable };
while (namediter.next()) {
   fname = namediter.filename();
   charstream = namediter.filecontents();
   System.out.println("Contents for file " + fname + ":");
   printStream(charstream);
   charstream.close();
}

namediter.close();
...
public void printStream(Reader in) throws IOException
{
   int character;
   while ((character = in.read()) != -1) {
      System.out.print((char)character);
   }
}

Remember that you can pass a SQLJ character stream to any method that takes a standard java.io.Reader as an input parameter.

Example 6-2 : Selecting LONG RAW Data into BinaryStream Column of Positional Iterator

This example selects data from a LONG RAW column, populating a SQLJ BinaryStream column in a positional iterator.

As explained in the preceding section, there can be only one stream column in a positional iterator and it must be the last column. Assume there is a table named BINTABLE with a NUMBER column called IDENTIFIER and a LONG RAW column called BINDATA that contains binary data associated with the identifier. The code is as follows:

import sqlj.runtime.*;
...
#sql iterator MyPosIter (int, BinaryStream);

...
MyPosIter positer = null;
int id=0;
BinaryStream binstream=null;
#sql positer = { SELECT identifier, bindata FROM bintable };
while (true) {
   #sql { FETCH :positer INTO :id, :binstream };
   if (positer.endFetch()) break;
   
   (...process data as desired...)
   
   binstream.close();
}
positer.close();
...

SQLJ Stream Objects as Output Parameters and Function Return Values

As described in the preceding sections, standard SQLJ supports the use of the BinaryStream and CharacterStream classes in the sqlj.runtime package for retrieval of stream data into iterator columns.

In addition, the Oracle SQLJ implementation enables the following uses of the SQLJ stream types if you use Oracle9i Database or later version, an Oracle JDBC driver, Oracle-specific code generation or Oracle customizer, and Oracle SQLJ run time:

  • They can appear as OUT or INOUT host variables from a stored procedure or function call.

  • They can appear as the return value from a stored function call.

Streams as Stored Procedure Output Parameters

You can use the BinaryStream and CharacterStream types as the assignment type for a stored procedure or stored function OUT or INOUT parameter.

Assume the following table definition:

CREATE TABLE streamexample (name VARCHAR2 (256), data LONG);
INSERT INTO streamexample (data, name)
   VALUES
   ('0000000000111111111112222222222333333333344444444445555555555',
   'StreamExample');

Also, presume the following stored procedure definition, which uses the STREAMEXAMPLE table:

CREATE OR REPLACE PROCEDURE out_longdata 
                            (dataname VARCHAR2, longdata OUT LONG) IS
BEGIN
   SELECT data INTO longdata FROM streamexample WHERE name = dataname;
END out_longdata;

The following sample code uses a call to the out_longdata stored procedure to read the long data:

import sqlj.runtime.*;

...
CharacterStream data;
#sql { CALL out_longdata('StreamExample', :OUT data) };
int c;
while ((c = data.read ()) != -1)
   System.out.print((char)c);
System.out.flush();
data.close();
...

Note:

Closing the stream is recommended, but not required.

Streams as Stored Function Results

You can use the BinaryStream and CharacterStream types as the assignment type for a stored function return result.

Assume the same STREAMEXAMPLE table definition as in the preceding stored procedure example. Also, assume the following stored function definition, which uses the STREAMEXAMPLE table:

CREATE OR REPLACE FUNCTION get_longdata (dataname VARCHAR2) RETURN long
   IS longdata LONG;
BEGIN
   SELECT data INTO longdata FROM streamexample WHERE name = dataname;
   RETURN longdata;
END get_longdata;

The following sample code uses a call to the get_longdata stored function to read the long data:

import sqlj.runtime.*;

...
CharacterStream data;
#sql data = { VALUES(get_longdata('StreamExample')) };
int c;
while ((c = data.read ()) != -1)
   System.out.print((char)c);
System.out.flush();
data.close();
...

Note:

Closing the stream is recommended, but not required.

Support for JDBC 2.0 LOB Types and Oracle Type Extensions

The Oracle SQLJ implementation offers extended functionality for the following JDBC 2.0 and Oracle-specific data types:

  • JDBC 2.0 large object (LOB) types (BLOB and CLOB)

  • Oracle BFILE type

  • Oracle ROWID type

  • Oracle REF CURSOR types

  • Other Oracle Database 12c Release 2 (12.2) data types, such as NUMBER and RAW

These data types are supported by classes in the oracle.sql package. LOBs and binary files (BFILEs) are handled similarly in many ways, so are discussed together. Additionally, the Oracle SQLJ implementation offers extended support for the standard BigDecimal JDBC type.

JDBC 2.0 functionality for user-defined SQL objects, object references, and collections are also supported.

Note that using Oracle extensions in your code requires the following:

  • Use one of Oracle JDBC drivers.

  • Use Oracle-specific code generation or for ISO code generation, customize the profiles appropriately. The default customizer, oracle.sqlj.runtime.util.OraCustomizer, is recommended.

  • Use Oracle SQLJ run time when your application runs.

Oracle SQLJ run time and an Oracle JDBC driver are required whenever you use Oracle customizer, even if you do not actually use Oracle extensions in your code.

For Oracle-specific semantics-checking, you must use an appropriate checker. The default checker, oracle.sqlj.checker.OracleChecker, acts as a front end and will run the appropriate checker based on your environment. This will be one of the Oracle specific checkers if you are using an Oracle JDBC driver.

This section covers the following topics:

Package oracle.sql

SQLJ users, as well as JDBC users, should be aware of the oracle.sql package, which includes classes to support all the Oracle Database 12c Release 2 (12.2) data types, such as oracle.sql.ROWID, oracle.sql.CLOB, and oracle.sql.NUMBER. The oracle.sql classes are wrappers for the raw SQL data and provide appropriate mappings and conversion methods to Java formats. An oracle.sql.* object contains a binary representation of the corresponding SQL data in the form of a byte array. Each oracle.sql.* data type class is a subclass of the oracle.sql.Datum class.

For Oracle-specific semantics-checking, you must use an appropriate checker. The default checker, oracle.sqlj.checker.OracleChecker, acts as a front end and will run the appropriate checker based on your environment. This will be one of the Oracle specific checkers if you are using an Oracle JDBC driver.

Support for BLOB, CLOB, and BFILE

The Oracle SQLJ and JDBC implementations support JDBC 2.0 LOB types and provide similar support for the Oracle specific BFILE type (read-only binary files stored outside the database). These data types are supported by the following classes:

  • oracle.sql.BLOB

  • oracle.sql.CLOB

  • oracle.sql.BFILE

These classes can be used in Oracle-specific SQLJ applications in the following ways:

  • As IN, OUT, or INOUT host variables in executable SQLJ statements and in INTO-lists

  • As return values from stored function calls

  • As column types in iterator declarations

See Also:

Oracle Database JDBC Developer's Guide for more information about LOBs and BFILEs and use of supported stream APIs.

You can manipulate LOBs by using methods defined in the BLOB and CLOB classes, which is recommended, or by using the procedures and functions defined in the DBMS_LOB PL/SQL package. All procedures and functions defined in this package can be called by SQLJ programs.

You can manipulate BFILEs by using methods defined in the BFILE class, which is recommended, or by using the file-handling routines of the DBMS_LOB package.

Using methods of the BLOB, CLOB, and BFILE classes in a Java application is more convenient than using the DBMS_LOB package and may also lead to faster execution in some cases.

Note that the type of the chunk being read or written depends on the kind of LOB being manipulated. For example, character large objects (CLOBs) contain character data and, therefore, Java strings are used to hold chunks of data. Binary large objects (BLOBs) contain binary data and, therefore, Java byte arrays are used to hold chunks of data.

Note:

The DBMS_LOB package requires a round trip to the server. Methods in the BLOB, CLOB, and BFILE classes may also result in a round trip to the server.

BFILE Class versus DBMS_LOB Functionality for BFILEs

Example 6-3 and Example 6-4 contrast use of the oracle.sql methods with use of the DBMS_LOB package for BFILEs:

BLOB and CLOB Classes versus DBMS_LOB Functionality for LOBs

Example 6-5 and Example 6-6 contrast use of the oracle.sql methods with use of the DBMS_LOB package for BLOBs, and Example 6-7 and Example 6-8 contrast use of the oracle.sql methods with use of the DBMS_LOB package for CLOBs.

LOB and BFILE Stored Function Results

Host variables of the BLOB, CLOB, and BFILE type can be assigned to the result of a stored function call. The following example is for a CLOB, but code for BLOBs and BFILEs would be functionally the same.

First, presume the following function definition:

CREATE OR REPLACE FUNCTION longer_clob (c1 CLOB, c2 CLOB) RETURN CLOB IS 
   result CLOB;
BEGIN
   IF dbms_lob.getLength(c2) > dbms_lob.getLength(c1) THEN
      result := c2;
   ELSE 
      result := c1;
   END IF;
   RETURN result; 
END longer_clob;

The following example uses a CLOB as the assignment type for a return value from the longer_clob function:

void readFromLongest(CLOB c1, CLOB c2) throws SQLException
{
   CLOB longest;
   #sql longest = { VALUES(longer_clob(:c1, :c2)) };
   readFromClob(longest);
}

The readFromLongest() method prints the contents of the longer passed CLOB, using the readFromClob() method defined previously.

LOB and BFILE Host Variables and SELECT INTO Targets

Host variables of the BLOB, CLOB, and BFILE type can appear in the INTO-list of a SELECT INTO executable statement. The following example is for a BLOB and CLOB, but code for BFILEs would be functionally the same.

Assume the following table definition:

CREATE TABLE basic_lob_table(x VARCHAR2(30), b BLOB, c CLOB);
INSERT INTO basic_lob_table 
   VALUES('one', '010101010101010101010101010101', 'onetwothreefour');
INSERT INTO basic_lob_table 
   VALUES('two', '020202020202020202020202020202', 'twothreefourfivesix');

The following example uses a BLOB and a CLOB as host variables that receive data from the table defined, using a SELECT INTO statement:

...
BLOB blob;
CLOB clob; 
#sql { SELECT one.b, two.c INTO :blob, :clob 
     FROM basic_lob_table one, basic_lob_table two 
     WHERE one.x='one' AND two.x='two' };
#sql { INSERT INTO basic_lob_table VALUES('three', :blob, :clob) };
...

This example selects the BLOB from the first row and the CLOB from the second row of BASIC_LOB_TABLE. It then inserts a third row into the table using the BLOB and CLOB selected in the previous operation.

LOBs and BFILEs in Iterator Declarations

The BLOB, CLOB, and BFILE types can be used as column types for SQLJ positional and named iterators. Such iterators can be populated as a result of compatible executable SQLJ operations.

Following are sample declarations:

#sql iterator NamedLOBIter(CLOB c);
#sql iterator PositionedLOBIter(BLOB);
#sql iterator NamedFILEIter(BFILE bf);

LOB and BFILE Host Variables and Named Iterator Results

The following example uses the BASIC_LOB_TABLE table and the readFromLongest() method defined in previous examples and a CLOB in a named iterator. Similar code could be written for BLOBs and BFILEs.

#sql iterator NamedLOBIter(CLOB c);

...
NamedLOBIter iter;  
#sql iter = { SELECT c FROM basic_lob_table };
if (iter.next())
   CLOB c1 = iter.c();
if (iter.next())
   CLOB c2 = iter.c();
iter.close();
readFromLongest(c1, c2);
...

This example uses an iterator to select two CLOBs from the first two rows of BASIC_LOB_TABLE, then prints the larger of the two using the readFromLongest() method.

LOB and BFILE Host Variables and Positional Iterator FETCH INTO Targets

Host variables of the BLOB, CLOB, and BFILE type can be used with positional iterators and appear in the INTO-list of the associated FETCH INTO statement if the corresponding column attribute in the iterator is of the identical type.

The following example uses the BASIC_LOB_TABLE table and the writeToBlob() method defined in previous examples. Similar code could be written for CLOBs and BFILEs.

#sql iterator PositionedLOBIter(BLOB);

...
PositionedLOBIter iter;
BLOB blob = null;
#sql iter = { SELECT b FROM basic_lob_table };
for (long rowNum = 1; ; rowNum++) 
{
    #sql { FETCH :iter INTO :blob };
    if (iter.endFetch()) break;
    writeToBlob(blob, 512*rowNum); 
}
iter.close();
...

This example calls writeToBlob() for each BLOB in BASIC_LOB_TABLE. Each row writes an additional 512 bytes of data.

Example 6-3 Use of oracle.sql.BFILE File-Handling Methods with BFILE

This example manipulates a BFILE using file-handling methods of the oracle.sql.BFILE class.

BFILE openFile (BFILE file) throws SQLException 
{ 
  String dirAlias, name; 
  dirAlias = file.getDirAlias(); 
  name = file.getName(); 
  System.out.println("name: " + dirAlias + "/" + name); 
   
  if (!file.isFileOpen())  
  { 
    file.openFile(); 
  } 
  return file; 
} 

The BFILE getDirAlias() and getName() methods construct the full path and file name. The openFile() method opens the file. You cannot manipulate BFILEs until they have been opened.

Example 6-4 Use of DBMS_LOB File-Handling Routines with BFILE

This example manipulates a BFILE using file-handling routines of the DBMS_LOB package.

BFILE openFile(BFILE file) throws SQLException 
{
   String dirAlias, name;
   #sql { CALL dbms_lob.filegetname(:file, :out dirAlias, :out name) };
   System.out.println("name: " + dirAlias + "/" + name);

   boolean isOpen;
   #sql isOpen = { VALUES(dbms_lob.fileisopen(:file)) };
   if (!isOpen) 
   {
      #sql { CALL dbms_lob.fileopen(:inout file) };
   }
   return file;
}

The openFile() method prints the name of a file object and then returns an opened version of the file. Note that BFILEs can be manipulated only after being opened with a call to DBMS_LOB.FILEOPEN or equivalent method in the BFILE class.

Example 6-5 Example: Use of oracle.sql.CLOB Read Methods with CLOB

This example reads data from a CLOB using methods of the oracle.sql.CLOB class.

void readFromClob(CLOB clob) throws SQLException 
{ 
  long clobLen, readLen; 
  String chunk; 
 
  clobLen = clob.length(); 
 
  for (long i = 0; i < clobLen; i+= readLen) { 
    chunk = clob.getSubString(i, 10); 
    readLen = chunk.length(); 
    System.out.println("read " + readLen + " chars: " + chunk); 
  } 
} 

This method contains a loop that reads from the CLOB and returns a 10-character Java string each time. The loop continues until the entire CLOB has been read.

Example 6-6 Example: Use of DBMS_LOB Read Routines with CLOB

This example uses routines of the DBMS_LOB package to read from a CLOB.

void readFromClob(CLOB clob) throws SQLException
{
   long clobLen, readLen;
   String chunk;

   #sql clobLen = { VALUES(dbms_lob.getlength(:clob)) };

   for (long i = 1; i <= clobLen; i += readLen) {
       readLen = 10;
       #sql { CALL dbms_lob.read(:clob, :inout readLen, :i, :out chunk) };
       System.out.println("read " + readLen + " chars: " + chunk);
   }
}

This method reads the contents of a CLOB in chunks of 10 characters at a time. Note that the chunk host variable is of the String type.

Example 6-7 Example: Use of oracle.sql.BLOB Write Routines with BLOB

This example writes data to a BLOB using methods of the oracle.sql.BLOB class. Input a BLOB and specified length.

void writeToBlob(BLOB blob, long blobLen) throws SQLException 
{ 
  byte[] chunk = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 }; 
  long chunkLen = (long)chunk.length; 
   
  for (long i = 0; i < blobLen; i+= chunkLen) { 
    if (blobLen < chunkLen) chunkLen = blobLen; 
    chunk[0] = (byte)(i+1); 
    chunkLen = blob.putBytes(i, chunk); 
  } 
} 

This method goes through a loop that writes to the BLOB in 10-byte chunks until the specified BLOB length has been reached.

Example 6-8 Example: Use of DBMS_LOB Write Routines with BLOB

This example uses routines of the DBMS_LOB package to write to a BLOB.

void writeToBlob(BLOB blob, long blobLen) throws SQLException
{
   byte[] chunk = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
   long chunkLen = (long)chunk.length;

   for (long i = 1; i <= blobLen; i += chunkLen) {
      if ((blobLen - i + 1) < chunkLen) chunkLen = blobLen - i + 1;
      chunk[0] = (byte)i;       
      #sql { CALL dbms_lob.write(:INOUT blob, :chunkLen, :i, :chunk) };
   }
} 

This method fills the contents of a BLOB in 10-byte chunks. Note that the chunk host variable is of the byte[] type.

Support for Oracle ROWID

The Oracle specific ROWID type stores the unique address for each row in a database table. The oracle.sql.ROWID class wraps ROWID information and is used to bind and define variables of the ROWID type.

Variables of the oracle.sql.ROWID type can be used in SQLJ applications connecting to Oracle Database 12c Release 2 (12.2) in the following ways:

  • As IN, OUT or INOUT host variables in SQLJ executable statements and in INTO-lists

  • As a return value from a stored function call

  • As column types in iterator declarations

ROWIDs in Iterator Declarations

You can use oracle.sql.ROWID as a column type for SQLJ positional and named iterators, as shown in the following declarations:

#sql iterator NamedRowidIter (String ename, ROWID rowid);

#sql iterator PositionedRowidIter (String, ROWID);

ROWID Host Variables and Named-Iterator SELECT Results

You can use ROWID objects as IN, OUT and INOUT parameters in SQLJ executable statements. In addition, you can populate iterators whose columns include ROWID types. This code example uses the preceding example declarations.

#sql iterator NamedRowidIter (String ename, ROWID rowid);

...
NamedRowidIter iter; 
ROWID rowid;
#sql iter = { SELECT first_name, rowid FROM employees };
while (iter.next())
{
   if (iter.first_name().equals("Peter Hall"))
   {
       rowid = iter.rowid();
       #sql { UPDATE employees SET salary = salary + 500 WHERE rowid = :rowid };
   }
}
iter.close();
...

This example increases the salary of the employee named Peter Hall by $500 according to the ROWID.

ROWID Stored Function Results

Consider the following function:

CREATE OR REPLACE FUNCTION get_rowid (name VARCHAR2) RETURN ROWID IS
   rid ROWID;
BEGIN
   SELECT rowid INTO rid FROM employees WHERE first_name = name;
   RETURN rid;
END get_rowid;

Given the preceding stored function, the following example indicates how a ROWID object is used as the assignment type for the function return result:

ROWID rowid;
#sql rowid = { values(get_rowid('AMY FEINER')) };
#sql { UPDATE employees SET salary = salary + 500 WHERE rowid = :rowid };

This example increases the salary of the employee named Amy Feiner by $500 according to the ROWID.

ROWID SELECT INTO Targets

Host variables of the ROWID type can appear in the INTO-list of a SELECT INTO statement.

ROWID rowid;
#sql { SELECT rowid INTO :rowid FROM employees WHERE first_name='PETER HALL' };
#sql { UPDATE employees SET salary = salary + 500 WHERE rowid = :rowid };

This example increases the salary of the employee named Peter Hall by $500 according to the ROWID.

ROWID Host Variables and Positional Iterator FETCH INTO Targets

Host variables of the ROWID type can appear in the INTO-list of a FETCH INTO statement if the corresponding column attribute in the iterator is of the identical type.

#sql iterator PositionedRowidIter (String, ROWID);

...
PositionedRowidIter iter;
ROWID rowid = null;
String ename = null;
#sql iter = { SELECT first_name, rowid FROM employees };
while (true)
{
   #sql { FETCH :iter INTO :ename, :rowid };
   if (iter.endFetch()) break;
   if (ename.equals("PETER HALL"))
   {
       #sql { UPDATE employees SET salary = salary + 500 WHERE rowid = :rowid };
   }
}
iter.close();
...

This example is similar to the previous named iterator example, but uses a positional iterator with its customary FETCH INTO syntax.

Positioned Update and Delete

Since Oracle Database 11g Release 1, SQLJ supports positioned update and delete operations. A positioned update or delete operation can be done using an iterator. The iterator used for positioned update or delete should implement the sqlj.runtime.ForUpdate interface. You can use a named iterator, positional iterator, or scrollable iterator.

The following code illustrates a positioned update:

...
#sql iterator iter implements sqlj.runtime.ForUpdate(String str)
...
#sql iter = {SELECT first_name FROM employees WHERE department_id=10};
...
while(iter.next())
{
 #sql {UPDATE employees SET salary=salary+5000 WHERE CURRENT OF :iter};
}
...

In the preceding code, an iterator iter is created and used to update the employees table.

Note:

If you want to avoid synchronization problems, then issue a SELECT ... FOR UPDATE statement.

You can similarly perform a positioned delete. For example:

...
#sql {DELETE FROM employees WHERE CURRENT OF :iter}
...

In the preceding example, iter is an iterator used to perform positioned delete.

The iterators that can be used with the WHERE CURRENT OF clause have the following limitations:

  • The query used to populate the iterator should not operate on multiple tables.

  • You cannot use a PL/SQL procedure returning a REF CURSOR with the iterator.

  • You cannot use an iterator that has been populated from a result set. That is, an iterator populated using the following statement, where rs is a result set:

    #sql iter = {cast :rs}
    

for_update Option

If for_update option is set at translation time, then "FOR UPDATE" is appended to the SELECT statements, which in turn return results into a ForUpdate iterator as follows:

% sqlj –for_update abc.sqlj
 
/* abc.sqlj */
#sql iterator  SalByName (double sal, String ename)  implements sqlj.runtime.ForUpdate;
 
public class abc {
…..
  void func1()
  {
    SalByName salbn;
    #sql salbn = {select salary, first_name from employees };
  }
…..
}

Now, "FOR UPDATE" is appended to the SELECT statement returning the ForUpdate iterator salbn in the following way:

………
String theSqlTS = “SELECT rowid sjT_rowid,first_name, salary FROM employees WHERE first_name =  :1 FOR UPDATE";
………

Table 6-3 shows the plausible values for the for_update option and the corresponding SQL statement for the preceding example:

Table 6-3 Plausible values for the for_update option and the corresponding SQL statement

for_update option SQLJ Statement SQL Statement

none

sqlj -for_update abc.sqlj

SELECT rowid sjT_rowid,first_name, salary FROM employees WHERE first_name = :1 FOR UPDATE

nowait

sqlj -P-for_update=nowait QueryDemo.sqlj

SELECT rowid sjT_rowid,first_name, salary FROM employees WHERE first_name = :1 FOR UPDATE nowait

number

sqlj -P-for_update=10 QueryDemo.sqlj

SELECT rowid sjT_rowid,first_name, salary FROM employees WHERE first_name = :1 FOR UPDATE wait 10

Note:

If the application already has FOR UPDATE in the select query, then using these new translator options will throw warnings during online check at translation time. If offline parsing is chosen during translation, then errors are not detected at translation time.

Support for Oracle REF CURSOR Types

Oracle PL/SQL and the Oracle SQLJ implementation support the use of cursor variables that represent database cursors.

Overview of REF CURSOR Types

Cursor variables are functionally equivalent to JDBC result sets, essentially encapsulating the results of a query. A cursor variable is often referred to as a REF CURSOR, but REF CURSOR itself is a type specifier, and not a type name. Instead, named REF CURSOR types must be specified. The following example shows a REF CURSOR type specification:

TYPE EmpCurType IS REF CURSOR;

Stored procedures and stored functions can return parameters of Oracle REF CURSOR types. You must use PL/SQL to return a REF CURSOR parameter. You cannot accomplish this using SQL alone. A PL/SQL stored procedure or function can declare a variable of some named REF CURSOR type, execute a SELECT statement, and return the results in the REF CURSOR variable.

REF CURSOR Types in SQLJ

In the Oracle SQLJ implementation, a REF CURSOR type can be mapped to iterator columns or host variables of any iterator class type or of the java.sql.ResultSet type, but host variables can be OUT only. Support for REF CURSOR types can be summarized as follows:

  • As result expressions for stored function returns

  • As output host expressions for stored procedure or function output parameters

  • As output host expressions in INTO-lists

  • As iterator columns

You can use the SQL CURSOR operator for a nested SELECT within an outer SELECT statement. This is how you can write a REF CURSOR object to an iterator column or ResultSet column in an iterator, or write a REF CURSOR object to an iterator host variable or ResultSet host variable in an INTO-list.

See Also:

"Using Iterators and Result Sets as Host Variables" for examples illustrating the use of implicit REF CURSOR variables, including an example of the CURSOR operator.

Note:

  • Use the type code OracleTypes.CURSOR for REF CURSOR types.

  • There is no oracle.sql class for REF CURSOR types. Use either java.sql.ResultSet or an iterator class. Close the result set or iterator to release resources when you are done processing it.

REF CURSOR Example

The following sample method shows a REF CURSOR type being retrieved from an anonymous block:

private static EmpIter refCursInAnonBlock(String name, int no) 
  throws java.sql.SQLException {
  EmpIter emps = null;    

  System.out.println("Using anonymous block for ref cursor.."); 
  #sql { begin
           INSERT INTO employees (first_name, employee_id) VALUES (:name, :no);
           OPEN :out emps FOR SELECT first_name, employee_id FROM employees ORDER BY employee_id;
         end
       };
  return emps;
}

Support for Other Oracle Database 11g Data Types

All oracle.sql classes can be used for iterator columns or for input, output, or input-output host variables in the same way that any standard Java type can be used. This includes the classes mentioned in the preceding sections and others, such as the oracle.sql.NUMBER, oracle.sql.CHAR, and oracle.sql.RAW classes.

Because the oracle.sql.* classes do not require conversion to Java type format, they offer greater efficiency and precision than equivalent Java types. You would have to convert the data to standard Java types, however, to use it with standard Java programs or to display it to end users.

Extended Support for BigDecimal

SQLJ supports java.math.BigDecimal in the following situations:

  • As host variables in SQLJ executable statements

  • As return values from stored function calls

  • As iterator column types

Standard SQLJ has the limitation that a value can be retrieved as BigDecimal only if that is the JDBC default mapping, which is the case only for numeric and decimal data.

See Also:

Table 6-1

In the Oracle SQLJ implementation, however, you can map to nondefault types as long as the data type is convertible from numeric and you use Oracle9i Database or later version, an Oracle JDBC driver, Oracle-specific code generation or Oracle customizer, and Oracle SQLJ run time. The CHAR, VARCHAR2, LONG, and NUMBER types are convertible. For example, you can retrieve data from a CHAR column into a BigDecimal variable. However, to avoid errors, you must be careful that the character data consists only of numbers.

Note:

The BigDecimal class is in the standard java.math package.