You should understand key concepts related to the support for a subset of the Web Ontology Language (OWL).
This chapter builds on the information in RDF Semantic Graph Overview, and it assumes that you are familiar with the major concepts associated with OWL, such as ontologies, properties, and relationships. For detailed information about OWL, see the OWL Web Ontology Language Reference at
An ontology is a shared conceptualization of knowledge in a particular domain.
It consists of a collection of classes, properties, and optionally instances. Classes are typically related by class hierarchy (subclass/ superclass relationship). Similarly, the properties can be related by property hierarchy (subproperty/ superproperty relationship). Properties can be symmetric or transitive, or both. Properties can also have domain, ranges, and cardinality constraints specified for them.
RDFS-based ontologies only allow specification of class hierarchies, property hierarchies,
instanceOf relationships, and a domain and a range for properties.
OWL ontologies build on RDFS-based ontologies by additionally allowing specification of property characteristics. OWL ontologies can be further classified as OWL-Lite, OWL-DL, and OWL Full. OWL-Lite restricts the cardinality minimum and maximum values to 0 or 1. OWL-DL relaxes this restriction by allowing minimum and maximum values. OWL Full allows instances to be also defined as a class, which is not allowed in OWL-DL and OWL-Lite ontologies.
Supported OWL Subsets describes OWL capabilities that are supported and not supported with semantic data.
2.1.1 Example: Disease Ontology
Figure 2-1 shows part of a disease ontology, which describes the classes and properties related to certain diseases. One requirement is to have a PATIENTS data table with a column named DIAGNOSIS, which must contain a value from the
Diseases_and_Disorders class hierarchy.
Figure 2-1 Disease Ontology Example
Description of "Figure 2-1 Disease Ontology Example"
In the disease ontology shown in Figure 2-1, the diagnosis
Immune_System_Disorder includes two subclasses,
Autoimmune_Disease diagnosis includes the subclass
Rheumatoid_Arthritis; and the
Immunodeficiency_Syndrome diagnosis includes the subclass
T_Cell_Immunodeficiency, which includes the subclass
The data in the PATIENTS table might include the PATIENT_ID and DIAGNOSIS column values shown in Table 2-1.
Table 2-1 PATIENTS Table Example Data
To query ontologies, you can use the SEM_MATCH table function or the SEM_RELATED operator and its ancillary operators.
2.1.2 Supported OWL Subsets
This section describes OWL vocabulary subsets that are supported.
Oracle Database supports the RDFS++, OWLSIF, and OWLPrime vocabularies, which have increasing expressivity, as well as OWL 2 RL. Each supported vocabulary has a corresponding rulebase; however, these rulebases do not need to be populated because the underlying entailment rules of these three vocabularies are internally implemented. The supported vocabularies are as follows:
RDFS++: A minimal extension to RDFS; which is RDFS plus
OWLSIF: OWL with IF Semantic, with the vocabulary and semantics proposed for pD* semantics in Completeness, decidability and complexity of entailment for RDF Schema and a semantic extension involving the OWL vocabulary, by H.J. Horst, Journal of Web Semantics 3, 2 (2005), 79–115.
OWLPrime: The following OWL capabilities:
Basics: class, subclass, property, subproperty, domain, range, type
Property characteristics: transitive, symmetric, functional, inverse functional, inverse
Class comparisons: equivalence, disjointness
Property comparisons: equivalence
Individual comparisons: same, different
Class expressions: complement
As with pD*, the supported semantics for these value restrictions are only intensional (IF semantics).
OWL 2 RL: Described in the "OWL 2 RL" section of the W3C OWL 2 Web Ontology Language Profiles recommendation (
http://www.w3.org/TR/owl2-profiles/#OWL_2_RL) as: "The OWL 2 RL profile is aimed at applications that require scalable reasoning without sacrificing too much expressive power. It is designed to accommodate both OWL 2 applications that can trade the full expressivity of the language for efficiency, and RDF(S) applications that need some added expressivity from OWL 2."
The system-defined rulebase
OWL2RLsupports all the standard production rules defined for OWL 2 RL. As with
OWLPRIME, users will not see any rules in this OWL2RL rulebase. The rulebase
OWL2RLwill be created automatically if it does not already exist.
The following code excerpt uses the OWL2RL rulebase:
CREATE TABLE m1_tpl (triple SDO_RDF_TRIPLE_S) COMPRESS; EXECUTE sem_apis.create_sem_model('m1','m1_tpl','triple'); -- Insert data into model M1. Details omitted ... -- Now run inference using the OWL2RL rulebase EXECUTE sem_apis.create_entailment('m1_inf',sem_models('m1'),sem_rulebases('owl2rl'));
Note that inference-related optimizations, such as parallel inference and RAW8, are all applicable when the
OWL2RLrulebase is used.
OWL 2 EL: Described in the "OWL 2 EL" section of the W3C OWL 2 Web Ontology Language Profiles recommendation (
http://www.w3.org/TR/owl2-profiles/#OWL_2_EL) as: "The OWL 2 EL profile is designed as a subset of OWL 2 that
is particularly suitable for applications employing ontologies that define very large numbers of classes and/or properties,
captures the expressive power used by many such ontologies, and
for which ontology consistency, class expression subsumption, and instance checking can be decided in polynomial time."
A prime example of OWL 2 EL ontology is the biomedical ontology SNOMED Clinical Terms (SNOMED CT). For information about SNOMED CT, see:
The system-defined rulebase
OWL2ELsupports the EL syntax.
OWL2RL, users will not see any rules in this
OWL2ELrulebase, and the
OWL2ELrulebase will be created automatically if it does not already exist.
The following code excerpt uses the
OWL2ELrulebase against the well known SNOMED ontology:
CREATE TABLE snomed_tpl (triple SDO_RDF_TRIPLE_S) COMPRESS; EXECUTE sem_apis.create_sem_model('snomed','snomed_tpl','triple') compress; -- Insert data into model SNOMED. Details omitted ... -- Now run inference using the OWL2EL rulebase EXECUTE sem_apis.create_entailment('snomed_inf',sem_models('snomed'),sem_rulebases('owl2el'));
Note that the
OWL2ELrulebase support does not include reflexive object properties (
ReflexiveObjectProperty) simply because a reflexive object property will link every individual with itself, which would probably cause an unnecessary and costly expansion of the inference graph.
Table 2-2 lists the RDFS/OWL vocabulary constructs included in each supported rulebase.
Table 2-2 RDFS/OWL Vocabulary Constructs Included in Each Supported Rulebase
|Rulebase Name||RDFS/OWL Constructs Included|
all RDFS vocabulary constructs
all RDFS vocabulary constructs
(As described in
(As described in
2.2 Using OWL Inferencing
You can use entailment rules to perform native OWL inferencing.
This section creates a simple ontology, performs native inferencing, and illustrates some more advanced features.
2.2.1 Creating a Simple OWL Ontology
Example 2-1 creates a simple OWL ontology, inserts one statement that two URIs refer to the same entity, and performs a query using the SEM_MATCH table function.
Example 2-1 Creating a Simple OWL Ontology
SQL> CREATE TABLE owltst(id number, triple sdo_rdf_triple_s); Table created. SQL> EXECUTE sem_apis.create_sem_model('owltst','owltst','triple'); PL/SQL procedure successfully completed. SQL> INSERT INTO owltst VALUES (1, sdo_rdf_triple_s('owltst', 'http://example.com/name/John', 'http://www.w3.org/2002/07/owl#sameAs', 'http://example.com/name/JohnQ')); 1 row created. SQL> commit; SQL> -- Use SEM_MATCH to perform a simple query. SQL> select s,p,o from table(SEM_MATCH('(?s ?p ?o)', SEM_Models('OWLTST'), null, null, null ));
2.2.2 Performing Native OWL inferencing
Example 2-2 calls the SEM_APIS.CREATE_ENTAILMENT procedure. You do not need to create the rulebase and add rules to it, because the OWL rules are already built into the RDF Semantic Graph inferencing engine.
Example 2-2 Performing Native OWL Inferencing
SQL> -- Invoke the following command to run native OWL inferencing that SQL> -- understands the vocabulary defined in the preceding section. SQL> SQL> EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), sem_rulebases('OWLPRIME')); PL/SQL procedure successfully completed. SQL> -- The following view is generated to represent the entailed graph (rules index). SQL> desc mdsys.semi_owltst_idx; SQL> -- Run the preceding query with an additional rulebase parameter to list SQL> -- the original graph plus the inferred triples. SQL> SELECT s,p,o FROM table(SEM_MATCH('(?s ?p ?o)', SEM_MODELS('OWLTST'), SEM_RULEBASES('OWLPRIME'), null, null ));
2.2.3 Performing OWL and User-Defined Rules Inferencing
Example 2-3 Performing OWL and User-Defined Rules Inferencing
SQL> -- First, insert the following assertions. SQL> INSERT INTO owltst VALUES (1, sdo_rdf_triple_s('owltst', 'http://example.com/name/John', 'http://example.com/rel/fatherOf', 'http://example.com/name/Mary')); SQL> INSERT INTO owltst VALUES (1, sdo_rdf_triple_s('owltst', 'http://example.com/name/Jack', 'http://example.com/rel/brotherOf', 'http://example.com/name/John')); SQL> -- Create a user-defined rulebase. SQL> EXECUTE sem_apis.create_rulebase('user_rulebase'); SQL> -- Insert a simple "uncle" rule. SQL> INSERT INTO mdsys.semr_user_rulebase VALUES ('uncle_rule', '(?x <http://example.com/rel/brotherOf> ?y)(?y <http://example.com/rel/fatherOf> ?z)', NULL, '(?x <http://example.com/rel/uncleOf> ?z)', null); SQL> -- In the following statement, 'USER_RULES=T' is required, to SQL> -- include the original graph plus the inferred triples. SQL> EXECUTE sem_apis.create_entailment('owltst2_idx', sem_models('owltst'), sem_rulebases('OWLPRIME','USER_RULEBASE'), SEM_APIS.REACH_CLOSURE, null, 'USER_RULES=T'); SQL> -- In the result of the following query, :Jack :uncleOf :Mary is inferred. SQL> SELECT s,p,o FROM table(SEM_MATCH('(?s ?p ?o)', SEM_MODELS('OWLTST'), SEM_RULEBASES('OWLPRIME','USER_RULEBASE'), null, null ));
For performance, the inference engine by default executes each user rule without checking the syntax legality of inferred triples (for example, literal value as a subject, blank node as a predicate) until after the last round of entailment. After completing the last entailment round, the inference engine removes all syntactically illegal triples without throwing any errors for these triples. However, because triples with illegal syntax may exist during multiple rounds of inference, rules can use these triples as part of their antecedents. For example, consider the following user-defined rules:
(?s :account ?y) (?s :country :Spain) --> (?y rdf:type :SpanishAccount)
(?s :account ?y) (?y rdf:type :SpanishAccount) --> (?s :language "es_ES")
Rule 1 finds all Spanish users and designates their accounts as Spanish accounts. Rule 2 sets the language for all users with Spanish accounts to
es_ES (Spanish). Consider the following data, displayed in Turtle format:
:Juan :account "123ABC4Z" :country :Spain :Alejandro :account "5678DEF9Y" :country :Spain
Applying Rule 1 and Rule 2 produces the following inferred triples:
(:Juan :language "es_ES") (:Alejandro :language "es_ES")
Note there are no triples specifying which accounts are of type
:SpanishAccount. The user-defined rules infer those triples during creation of the entailment, but the inference engine removes them after the last round of inference because they contain illegal syntax. The accounts are the literal values, which cannot be used as subjects in an RDF triple.
To force the checking of syntax legality of inferred triples, add the
/*+ ENABLE_SYNTAX_CHECKING */ optimizer hint to the beginning of the rule's FILTER expression. Forcing syntax checking for a rule can result in a performance penalty and will throw an exception for any syntactically illegal triples. The following example, similar to Rule 1, forces syntax checking. (In addition, merely to illustrate the use of a filter expression, the example restricts accounts to those that do not end with the letter '
INSERT INTO mdsys.semr_user_rulebase VALUES ( 'spanish_account_rule', '(?s <http://example.com/account> ?y)(?y <http://example.com/account> <http://example.com/Spain>)', '/*+ ENABLE_SYNTAX_CHECKING */ y not like ''%Z'' ', '(?y <http://www.w3.org/1999/02/22-rdf-syntax-ns#type> <http://example.com/SpanishAccount>)', NULL );
2.2.4 Generating OWL inferencing Proofs
OWL inference can be complex, depending on the size of the ontology, the actual vocabulary (set of language constructs) used, and the interactions among those language constructs. To enable you to find out how a triple is derived, you can use proof generation during inference. (Proof generation does require additional CPU time and disk resources.)
To generate the information required for proof, specify
PROOF=T in the call to the SEM_APIS.CREATE_ENTAILMENT procedure, as shown in the following example:
EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), - sem_rulebases('owlprime'), SEM_APIS.REACH_CLOSURE, 'SAM', 'PROOF=T');
PROOF=T causes a view to be created containing proof for each inferred triple. The view name is the entailment name prefixed by
MDSYS.SEMI_. Two relevant columns in this view are LINK_ID and EXPLAIN (the proof). The following example displays the LINK_ID value and proof of each generated triple (with LINK_ID values shortened for simplicity):
SELECT link_id || ' generated by ' || explain as triple_and_its_proof FROM mdsys.semi_owltst_idx; TRIPLE_AND_ITS_PROOF -------------------------------------------------------------------- 8_5_5_4 generated by 4_D_5_5 : SYMM_SAMH_SYMM 8_4_5_4 generated by 8_5_5_4 4_D_5_5 : SAM_SAMH . . .
A proof consists of one or more triple (link) ID values and the name of the rule that is applied on those triples:
link-id2 ... l
Example 2-4 Displaying Proof Information
To get the full subject, predicate, and object URIs for proofs, you can query the model view and the entailment (rules index) view. Example 2-4 displays the LINK_ID value and associated triple contents using the model view MDSYS.SEMM_OWLTST and the entailment view MDSYS.SEMI_OWLTST_IDX.
SELECT to_char(x.triple.rdf_m_id, 'FMXXXXXXXXXXXXXXXX') ||'_'|| to_char(x.triple.rdf_s_id, 'FMXXXXXXXXXXXXXXXX') ||'_'|| to_char(x.triple.rdf_p_id, 'FMXXXXXXXXXXXXXXXX') ||'_'|| to_char(x.triple.rdf_c_id, 'FMXXXXXXXXXXXXXXXX'), x.triple.get_triple() FROM ( SELECT sdo_rdf_triple_s( t.canon_end_node_id, t.model_id, t.start_node_id, t.p_value_id, t.end_node_id) triple FROM (select * from mdsys.semm_owltst union all select * from mdsys.semi_owltst_idx ) t WHERE t.link_id IN ('4_D_5_5','8_5_5_4') ) x; LINK_ID X.TRIPLE.GET_TRIPLE()(SUBJECT, PROPERTY, OBJECT) ---------- -------------------------------------------------------------- 4_D_5_5 SDO_RDF_TRIPLE('<http://example.com/name/John>', '<http://www.w3.org/2002/07/owl#sameAs>', '<http://example.com/name/JohnQ>') 8_5_5_4 SDO_RDF_TRIPLE('<http://example.com/name/JohnQ>', '<http://www.w3.org/2002/07/owl#sameAs>', '<http://example.com/name/John>')
In Example 2-4, for the proof entry 8_5_5_4 generated by 4_D_5_5 : SYMM_SAMH_SYMM for the triple with LINK_ID = 8_5_5_4, it is inferred from the triple with 4_D_5_5 using the symmetricity of
If the entailment status is INCOMPLETE and if the last entailment was generated without proof information, you cannot invoke SEM_APIS.CREATE_ENTAILMENT with
PROOF=T. In this case, you must first drop the entailment and create it again specifying
2.2.5 Validating OWL Models and Entailments
An OWL ontology may contain errors, such as unsatisfiable classes, instances belonging to unsatisfiable classes, and two individuals asserted to be same and different at the same time. You can use the SEM_APIS.VALIDATE_MODEL and SEM_APIS.VALIDATE_ENTAILMENT functions to detect inconsistencies in the original data model and in the entailment, respectively.
Example 2-5 Validating an Entailment
SQL> -- Insert an offending triple. SQL> insert into owltst values (1, sdo_rdf_triple_s('owltst', 'urn:C1', 'http://www.w3.org/2000/01/rdf-schema#subClassOf', 'http://www.w3.org/2002/07/owl#Nothing')); SQL> -- Drop entailment first. SQL> exec sem_apis.drop_entailment('owltst_idx'); PL/SQL procedure successfully completed. SQL> -- Perform OWL inferencing. SQL> exec sem_apis.create_entailment('owltst_idx', sem_models('OWLTST'), sem_rulebases('OWLPRIME')); PL/SQL procedure successfully completed. SQL > set serveroutput on; SQL > -- Now invoke validation API: sem_apis.validate_entailment SQL > declare lva mdsys.rdf_longVarcharArray; idx int; begin lva := sem_apis.validate_entailment(sem_models('OWLTST'), sem_rulebases('OWLPRIME')) ; if (lva is null) then dbms_output.put_line('No errors found.'); else for idx in 1..lva.count loop dbms_output.put_line('Offending entry := ' || lva(idx)) ; end loop ; end if; end ; / SQL> -- NOTE: The LINK_ID value and the numbers in the following SQL> -- line are shortened for simplicity in this example. -- Offending entry :=
1 10001 (4_2_4_8 2 4 8) Unsatisfiable class.
Each item in the validation report array includes the following information:
Number of triples that cause this error (
1in Example 2-5)
Error code (
One or more triples (shown in parentheses in the output;
(4_2_4_8 2 4 8)in Example 2-5).
These numbers are the LINK_ID value and the ID values of the subject, predicate, and object.
Descriptive error message (
Unsatisfiable class.in Example 2-5)
The output in Example 2-5 indicates that the error is caused by one triple that asserts that a class is a subclass of an empty class
2.2.6 Using SEM_APIS.CREATE_ENTAILMENT for RDFS Inference
In addition to accepting OWL vocabularies, the SEM_APIS.CREATE_ENTAILMENT procedure accepts RDFS rulebases. The following example shows RDFS inference (all standard RDFS rules are defined in
EXECUTE sem_apis.create_entailment('rdfstst_idx', sem_models('my_model'), sem_rulebases('RDFS'));
Because rules RDFS4A, RDFS4B, RDFS6, RDFS8, RDFS10, RDFS13 may not generate meaningful inference for your applications, you can deselect those components for faster inference. The following example deselects these rules.
EXECUTE sem_apis.create_entailment('rdfstst_idx', sem_models('my_model'), sem_rulebases('RDFS'), SEM_APIS.REACH_CLOSURE, - 'RDFS4A-, RDFS4B-, RDFS6-, RDFS8-, RDFS10-, RDFS13-');
2.2.7 Enhancing Inference Performance
This section describes suggestions for improving the performance of inference operations.
Collect statistics before inferencing. After you load a large RDF/OWL data model, you should execute the SEM_PERF.GATHER_STATS procedure. See the Usage Notes for that procedure (in SEM_PERF Package Subprograms) for important usage information.
Allocate sufficient temporary tablespace for inference operations. OWL inference support in Oracle relies heavily on table joins, and therefore uses significant temporary tablespace.
Use the appropriate implementations of the SVFH and AVFH inference components.
The default implementations of the SVFH and AVFH inference components work best when the number of restriction classes defined by
owl:allValuesFromis low (as in the LUBM data sets). However, when the number of such classes is high (as in the Gene Ontology
http://www.geneontology.org/), using non-procedural implementations of SVFH and AVFH may significantly improve performance.
To disable the procedural implementations and to select the non-procedural implementations of SVFH and AVFH, include
'PROCAVFH=F'in the options to SEM_APIS.CREATE_ENTAILMENT. Using the appropriate implementation for an ontology can provide significant performance benefits. For example, selecting the non-procedural implementation of SVFH for the NCI Thesaurus ontology (see
http://www.cancer.gov/research/resources/terminology) produced a 960% performance improvement for the SVFH inference component (tested on a dual-core, 8GB RAM desktop system with 3 SATA disks tied together with Oracle ASM).
See also Optimizing owl:sameAs Inference.
2.2.8 Optimizing owl:sameAs Inference
You can optimize inference performance for large
owl:sameAs cliques by specifying
'OPT_SAMEAS=T' in the
options parameter when performing OWLPrime entailment. (A clique is a graph in which every node of it is connected to, bidirectionally, every other node in the same graph.)
According to OWL semantics, the
owl:sameAs construct is treated as an equivalence relation, so it is reflexive, symmetric, and transitive. As a result, during inference a full materialization of
owl:sameAs-related entailments could significantly increase the size of the inferred graph. Consider the following example triple set:
:John owl:sameAs :John1 . :John owl:sameAs :John2 . :John2 :hasAge "32" .
Applying OWLPrime inference (with the
SAM component specified) to this set would generate the following new triples:
:John1 owl:sameAs :John . :John2 owl:sameAs :John . :John1 owl:sameAs :John2 . :John2 owl:sameAs :John1 . :John owl:sameAs :John . :John1 owl:sameAs :John1 . :John2 owl:sameAs :John2 . :John :hasAge "32" . :John1 :hasAge "32" .
In the preceding example,
:John2 are connected to each other with the
owl:sameAs relationship; that is, they are members of an
owl:sameAs clique. To provide optimized inference for large
owl:sameAs cliques, you can consolidate
owl:sameAs triples without sacrificing correctness by specifying
'OPT_SAMEAS=T' in the
options parameter when performing OWLPrime entailment. For example:
EXECUTE sem_apis.create_entailment('M_IDX',sem_models('M'), sem_rulebases('OWLPRIME'),null,null,'OPT_SAMEAS=T');
When you specify this option, for each
owl:sameAs clique, one resource from the clique is chosen as a canonical representative and all of the inferences for that clique are consolidated around that resource. Using the preceding example, if
:John1 is the clique representative, after consolidation the inferred graph would contain only the following triples:
:John1 owl:sameAs :John1 . :John1 :hasAge "32" .
Some overhead is incurred with
owl:sameAs consolidation. During inference, all asserted models are copied into the inference partition, where they are consolidated together with the inferred triples. Additionally, for very large asserted graphs, consolidating and removing duplicate triples incurs a large runtime overhead, so the
OPT_SAMEAS=T option is recommended only for ontologies that have a large number of
owl:sameAs relationships and large clique sizes.
After the OPT_SAMEAS=T option has been used for an entailment, all subsequent uses of SEM_APIS.CREATE_ENTAILMENT for that entailment must also use
OPT_SAMEAS=T, or an error will be reported. To disable optimized
sameAs handling, you must first drop the entailment.
Clique membership information is stored in a view named MDSYS.SEMC_entailment-name, where entailment-name is the name of the entailment (rules index). Each MDSYS.SEMC_entailment-name view has the columns shown in Table 2-3.
Table 2-3 MDSYS.SEMC_entailment_name View Columns
|Column Name||Data Type||Description|
ID number of the inferred model
ID number of a resource that is a member of the
ID number of the clique representative for the VALUE_ID resource
To save space, the MDSYS.SEMC_entailment-name view does not contain reflexive rows like (CLIQUE_ID, CLIQUE_ID).
22.214.171.124 Querying owl:sameAs Consolidated Inference Graphs
At query time, if the entailment queried was created using the
OPT_SAMEAS=T option, the results are returned from an
owl:sameAs-consolidated inference partition. The query results are not expanded to include the full
In the following example query, the only result returned would be
:John1, which is the canonical clique representative.
SELECT A FROM TABLE ( SEM_MATCH ('(?A :hasAge "32")',SEM_MODELS('M'), SEM_RULEBASES('OWLPRIME'),NULL, NULL));
With the preceding example, even though
:John2 :hasAge "32" occurs in the model, it has been replaced during the inference consolidation phase where redundant triples are removed. However, you can expand the query results by performing a join with the MDSYS.SEMC_rules-index-name view that contains the consolidated
owl:sameAs information. For example, to get expanded result set for the preceding SEM_MATCH query, you can use the following expanded query:
SELECT V.VALUE_NAME A_VAL FROM TABLE ( SEM_MATCH ('(?A :hasAge "32")',SEM_MODELS('M'), SEM_RULEBASES('OWLPRIME'), NULL, NULL)) Q, MDSYS.RDF_VALUE$ V, MDSYS.SEMC_M_IDX C WHERE V.VALUE_ID = C.VALUE_ID AND C.CLIQUE_ID = Q.A$RDFVID UNION ALL SELECT A A_VAL FROM TABLE ( SEM_MATCH ('(?A :hasAge "32")',SEM_MODELS('M'), SEM_RULEBASES('OWLPRIME'),NULL, NULL));
Or, you could rewrite the preceding expanded query using a left outer join, as follows:
SELECT V.VALUE_NAME A_VAL FROM TABLE ( SEM_MATCH ('(?A <http://hasAge> "33")',SEM_MODELS('M'), SEM_RULEBASES('OWLPRIME'), NULL, NULL)) Q, MDSYS.RDF_VALUE$ V, (SELECT value_id, clique_id FROM MDSYS.SEMC_M_IDX UNION ALL SELECT DISTINCT clique_id, clique_id FROM MDSYS.SEMC_M_IDX) C WHERE Q.A$RDFVID = c.clique_id (+) AND V.VALUE_ID = nvl(C.VALUE_ID, Q.A$RDFVID);
2.2.9 Performing Incremental Inference
Incremental inference can be used to update entailments (rules indexes) efficiently after triple additions. There are two ways to enable incremental inference for an entailment:
INC=Twhen creating the entailment. For example:
EXECUTE sem_apis.create_entailment ('M_IDX',sem_models('M'), sem_rulebases('OWLPRIME'),null,null, 'INC=T');
Use the SEM_APIS.ENABLE_INC_INFERENCE procedure.
If you use this procedure, the entailment must have a VALID status. Before calling the procedure, if you do not own the models involved in the entailment, you must ensure that the respective model owners have used the SEM_APIS.ENABLE_CHANGE_TRACKING procedure to enable change tracking for those models.
When incremental inference is enabled for an entailment, the parameter
INC=T must be specified when invoking the SEM_APIS.CREATE_ENTAILMENT procedure for that entailment.
Incremental inference for an entailment depends on triggers for the application tables of the models involved in creating the entailment. This means that incremental inference works only when triples are inserted in the application tables underlying the entailment using conventional path loads, unless you specify the triples by using the
delta_in parameter in the call to the SEM_APIS.CREATE_ENTAILMENT procedure, as in the following example, in which the triples from model
M_NEW will be added to model
M, and entailment
M_IDX will be updated with the new inferences:
EXECUTE sem_apis.create_entailment('M_IDX', sem_models('M'), sem_rulebases('OWLPRIME''), SEM_APIS.REACH_CLOSURE, null, null, sem_models('M_NEW'));
If multiple models are involved in the incremental inference call, then to specify the destination model to which the
delta_in model or models are to be added, specify
<model_name> in the
options parameter. For example, the following causes the semantic data in model
M_NEW to be added to model
EXECUTE sem_apis.create_entailment('M_IDX', sem_models('M1','M2','M3'), sem_rulebases('OWLPRIME''), SEM_APIS.REACH_CLOSURE, null, 'DEST_MODEL=M2', sem_models('M_NEW'));
Another way to bypass the conventional path loading requirement when using incremental inference is to set the UNDO_RETENTION parameter to cover the intervals between entailments when you perform bulk loading. For example, if the last entailment was created 6 hours ago, the UNDO_RETENTION value should be set to greater than 6 hours; if it is less than that, then (given a heavy workload and limited undo space) it is not guaranteed that all relevant undo information will be preserved for incremental inference to apply. In such cases, the SEM_APIS.CREATE_ENTAILMENT procedure falls back to regular (non-incremental) inference.
To check if change tracking is enabled on a model, use the SEM_APIS.GET_CHANGE_TRACKING_INFO procedure. To get additional information about incremental inference for an entailment, use the SEM_APIS.GET_INC_INF_INFO procedure.
The following restrictions apply to incremental inference:
It does not work with optimized
OPT_SAMEAS), user-defined rules, VPD-enabled models, or version-enabled models.
It supports only the addition of triples. With updates or deletions, the entailment will be completely rebuilt.
It depends on triggers on application tables.
Column types (RAW8 or NUMBER) used in incremental inference must be consistent. For instance, if
RAW8=Tis used to build the entailment initially, then for every subsequent SEM_APIS.CREATE_ENTAILMENT call the same option must be used. To change the column type to NUMBER, you must drop and rebuild the entailment.
2.2.10 Using Parallel Inference
Parallel inference can improve inference performance by taking advantage of the capabilities of a multi-core or multi-CPU architectures. To use parallel inference, specify the
DOP (degree of parallelism) keyword and an appropriate value when using the SEM_APIS.CREATE_ENTAILMENT procedure. For example:
EXECUTE sem_apis.create_entailment('M_IDX',sem_models('M'), sem_rulebases('OWLPRIME'), sem_apis.REACH_CLOSURE, null, 'DOP=4');
Specifying the DOP keyword causes parallel execution to be enabled for an Oracle-chosen set of inference components
The success of parallel inference depends heavily on a good hardware configuration of the system on which the database is running. The key is to have a "balanced" system that implements the best practices for database performance tuning and Oracle SQL parallel execution. For example, do not use a single 1 TB disk for an 800 GB database, because executing SQL statements in parallel on a single physical disk can even be slower than executing SQL statements in serial mode. Parallel inference requires ample memory; for each CPU core, you should have at least 4 GB of memory.
Parallel inference is best suited for large ontologies; however, inference performance can also improve for small ontologies.
There is some transient storage overhead associated with using parallel inference. Parallel inference builds a source table that includes all triples based on all the source RDF/OWL models and existing inferred graph. This table might use an additional 10 to 30 percent of storage compared to the space required for storing data and index of the source models.
2.2.11 Using Named Graph Based Inferencing (Global and Local)
The default inferencing in Oracle Database takes all asserted triples from all the source model or models provided and applies semantic rules on top of all the asserted triples until an inference closure is reached. Even if the given source models contain one or more multiple named graphs, it makes no difference because all assertions, whether part of a named graph or not, are treated the same as if they come from a single graph. (For an introduction to named graph support in RDF Semantic Graph, see Named Graphs.)
This default inferencing can be thought of as completely "global" in that it does not consider named graphs at all.
However, if you use named graphs, you can override the default inferencing and have named graphs be considered by using either of the following features:
Named graph based global inference (NGGI), which treats all specified named graphs as a unified graph. NGGI lets you narrow the scope of triples to be considered, while enabling great flexibility; it is explained in Named Graph Based Global Inference (NGGI).
Named graph based local inference (NGLI), which treats each specified named graph as a separate entity. NGLI is explained in Named Graph Based Local Inference (NGLI).
For using NGGI and NGLI together, see a recommended usage flow in Using NGGI and NGLI Together.
You specify NGGI or NGLI through certain parameters and options to the SEM_APIS.CREATE_ENTAILMENT procedure when you create an entailment (rules index).
126.96.36.199 Named Graph Based Global Inference (NGGI)
Named graph based global inference (NGGI) enables you to narrow the scope of triples used for inferencing at the named graph level (as opposed to the model level). It also enables great flexibility in selecting the scope; for example, you can include triples from zero or more named graphs and/or from the default graph, and you can include all triples with a null graph name from specified models.
For example, in a hospital application you may only want to apply the inference rules on all the information contained in a set of named graphs describing patients of a particular hospital. If the patient-related named graphs contains only instance-related assertions (ABox), you can specify one or multiple additional schema related-models (TBox), as in Example 2-6.
Example 2-6 Named Graph Based Global Inference
EXECUTE sem_apis.create_entailment( 'patients_inf', models_in => sem_models('patients','hospital_ontology'), rulebases_in => sem_rulebases('owl2rl'), passes => SEM_APIS.REACH_CLOSURE, inf_components_in => null, options => 'DOP=4,RAW8=T', include_default_g => sem_models('hospital_ontology'), include_named_g => sem_graphs('<urn:hospital1_patient1>','<urn:hospital1_patient2>'), inf_ng_name => '<urn:inf_graph_for_hospital1>' );
In Example 2-6:
Two models are involved:
patientscontains a set of named graphs where each named graph holds triples relevant to a particular patient, and
hospital_ontologycontains schema information describing concepts and relationships that are defined for hospitals. These two models together are the source models, and they set up an overall scope for the inference.
include_default_gparameter causes all triples with a NULL graph name in the specified models to participate in NGGI. In this example, all triples with a NULL graph name in model
hospital_ontologywill be included in NGGI.
include_named_gparameter causes all triples from the specified named graphs (across all source models) to participate in NGGI. In this example, triples from named graphs
<urn:hospital1_patient2>will be included in NGGI.
inf_ng_nameparameter assigns graph name
<urn:inf_graph_for_hospital1>to all the new triples inferred by NGGI.
188.8.131.52 Named Graph Based Local Inference (NGLI)
Named graph based local inference (NGLI) treats each named graph as a separate entity instead of viewing the graphs as a single unified graph. Inference logic is performed within the boundary of each entity. You can specify schema-related assertions (TBox) in a default graph, and that default graph will participate the inference of each named graph. For example, inferred triples based on a graph with name
G1 will be assigned the same graph name
G1 in the inferred data partition.
Assertions from any two separate named graphs will never jointly produce any new assertions.
For example, assume the following:
G1includes the following assertion:
:John :hasBirthMother :Mary .
G2includes the following assertion:
:John :hasBirthMother :Bella .
The default graph includes the assertion that
owl:FunctionalProperty. (This assertion has a null graph name.)
In this example, named graph based local inference (NGLI) will not infer that
owl:sameAs :Bella because the two assertions are from two distinct graphs,
G2. By contrast, a named graph based global inference (NGGI) that includes
G2, and the functional property definition would be able to infer that
NGLI currently does not work together with proof generation, user-defined rules, optimized
owl:sameAs handling, or incremental inference.
Example 2-7 Named Graph Based Local Inference
Example 2-7 shows NGLI.
EXECUTE sem_apis.create_entailment( 'patients_inf', models_in => sem_models('patients','hospital_ontology'), rulebases_in => sem_rulebases('owl2rl'), passes => SEM_APIS.REACH_CLOSURE, inf_components_in => null, options => 'LOCAL_NG_INF=T' );
In Example 2-7:
The two models patients and hospital_ontology together are the source models, and they set up an overall scope for the inference, similar to the case of global inference in Example 2-6. All triples with a null graph name are treated as part of the common schema (TBox). Inference is performed within the boundary of every single named graph combined with the common schema.
optionsparameter keyword-value pair
LOCAL_NG_INF=Tspecifies that named graph based local inference (NGLI) is to be performed.
Note that, by design, NGLI does not apply to the default graph itself. However, you can easily apply named graph based global inference (NGGI) on the default graph and set the
inf_ng_name parameter to null. In this way, the TBox inference is precomputed, improving the overall performance and storage consumption.
NGLI does not allow the following:
Inferring new relationships based on a mix of triples from multiple named graphs
Inferring new relationships using only triples from the default graph.
To get the inference that you would normally expect, you should keep schema assertions and instance assertions separate. Schema assertions (for example,
:A rdfs:subClassOf :B and
:p1 rdfs:subPropertyOf :p2) should be stored in the default graph as unnamed triples (with null graph names). By contrast, instance assertions (for example,
:X :friendOf :Y) should be stored in one of the named graphs.
For a discussion and example of using NGLI to perform document-centric inference with semantically indexed documents, see Performing Document-Centric Inference.
184.108.40.206 Using NGGI and NGLI Together
The following is a recommended usage flow for using NGGI and NGLI together. It assumes that TBox and ABox are stored in two separate models, that TBox contains schema definitions and all triples in the TBox have a null graph name, but that ABox consists of a set of named graphs describing instance-related data.
- Invoke NGGI on the TBox by itself. For example:
EXECUTE sem_apis.create_entailment( 'TEST_INF', sem_models('abox','tbox'), sem_rulebases('owl2rl'), SEM_APIS.REACH_CLOSURE, include_default_g=>sem_models('tbox') );
- Invoke NGLI for all named graphs. For example:
EXECUTE sem_apis.create_entailment( 'TEST_INF', sem_models('abox','tbox'), sem_rulebases('owl2rl'), SEM_APIS.REACH_CLOSURE, options => 'LOCAL_NG_INF=T,ENTAIL_ANYWAY=T' );
ENTAIL_ANYWAY=Tis specified because the NGGI call in step 1will set the status of inferred graph to
VALID, and the SEM_APIS.CREATE_ENTAILMENT procedure call in step 2 will quit immediately unless
2.2.12 Performing Selective Inferencing (Advanced Information)
Selective inferencing is component-based inferencing, in which you limit the inferencing to specific OWL components that you are interested in. To perform selective inferencing, use the
inf_components_in parameter to the SEM_APIS.CREATE_ENTAILMENT procedure to specify a comma-delimited list of components. The final inferencing is determined by the union of rulebases specified and the components specified.
Example 2-8 Performing Selective Inferencing
Example 2-8 limits the inferencing to the class hierarchy from subclass (SCOH) relationship and the property hierarchy from subproperty (SPOH) relationship. This example creates an empty rulebase and then specifies the two components (
'SCOH,SPOH') in the call to the SEM_APIS.CREATE_ENTAILMENT procedure.
EXECUTE sem_apis.create_rulebase('my_rulebase'); EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), sem_rulebases('my_rulebase'), SEM_APIS.REACH_CLOSURE, 'SCOH,SPOH');
The following component codes are available:
The rules corresponding to components with a prefix of RDFP can be found in Completeness, decidability and complexity of entailment for RDF Schema and a semantic extension involving the OWL vocabulary, by H.J. Horst.
The syntax for deselecting a component is component_name followed by a minus (-) sign. For example, the following statement performs OWLPrime inference without calculating the
EXECUTE sem_apis.create_entailment('owltst_idx', sem_models('owltst'), sem_rulebases('OWLPRIME'), SEM_APIS.REACH_CLOSURE, 'SCOH-');
By default, the OWLPrime rulebase implements the transitive semantics of owl:sameAs. OWLPrime does not include the following rules (semantics):
U owl:sameAs V . U p X . ==> V p X . U owl:sameAs V . X p U . ==> X p V .
The reason for not including these rules is that they tend to generate many assertions. If you need to include these assertions, you can include the
SAM component code in the call to the SEM_APIS.CREATE_ENTAILMENT procedure.
2.3 Using Semantic Operators to Query Relational Data
You can use semantic operators to query relational data in an ontology-assisted manner, based on the semantic relationship between the data in a table column and terms in an ontology.
The SEM_RELATED semantic operator retrieves rows based on semantic relatedness. The SEM_DISTANCE semantic operator returns distance measures for the semantic relatedness, so that rows returned by the SEM_RELATED operator can be ordered or restricted using the distance measure. The index type MDSYS.SEM_INDEXTYPE allows efficient execution of such queries, enabling scalable performance over large data sets.
2.3.1 Using the SEM_RELATED Operator
Referring to the ontology example in Example: Disease Ontology, consider the following query that requires semantic matching: Find all patients whose diagnosis is of the type 'Immune_System_Disorder'. A typical database query of the PATIENTS table (described in Example: Disease Ontology) involving syntactic match will not return any rows, because no rows have a DIAGNOSIS column containing the exact value
Immune_System_Disorder. For example the following query will not return any rows:
SELECT diagnosis FROM patients WHERE diagnosis = 'Immune_System_Disorder';
Example 2-9 SEM_RELATED Operator
However, many rows in the patient data table are relevant, because their diagnoses fall under this class. Example 2-9 uses the SEM_RELATED operator (instead of lexical equality) to retrieve all the relevant rows from the patient data table. (In this example, the term
Immune_System_Disorder is prefixed with a namespace, and the default assumption is that the values in the table column also have a namespace prefix. However, that might not always be the case, as explained in Using URIPREFIX When Values Are Not Stored as URIs.)
SELECT diagnosis FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;
The SEM_RELATED operator has the following attributes:
SEM_RELATED( sub VARCHAR2, predExpr VARCHAR2, obj VARCHAR2, ontologyName SEM_MODELS, ruleBases SEM_RULEBASES, index_status VARCHAR2, lower_bound INTEGER, upper_bound INTEGER ) RETURN INTEGER;
sub attribute is the name of table column that is being searched. The terms in the table column are typically the subject in a <subject, predicate, object> triple pattern.
predExpr attribute represents the predicate that can appear as a label of the edge on the path from the subject node to the object node.
obj attribute represents the term in the ontology for which related terms (related by the
predExpr attribute) have to be found in the table (in the column specified by the
sub attribute). This term is typically the object in a <subject, predicate, object> triple pattern. (In a query with the equality operator, this would be the query term.)
ontologyName attribute is the name of the ontology that contains the relationships between terms.
rulebases attribute identifies one or more rulebases whose rules have been applied to the ontology to infer new relationships. The query will be answered based both on relationships from the ontology and the inferred new relationships when this attribute is specified.
index_status optional attribute lets you query the data even when the relevant entailment (created when the specified rulebase was applied to the ontology) does not have a valid status. If this attribute is null, the query returns an error if the entailment does not have a valid status. If this attribute is not null, it must be the string
INVALID, to specify the minimum status of the entailment for the query to succeed. Because OWL does not guarantee monotonicity, the value
INCOMPLETE should not be used when an OWL Rulebase is specified.
upper_bound optional attributes let you specify a bound on the distance measure of the relationship between terms that are related. See Using the SEM_DISTANCE Ancillary Operator for the description of the distance measure.
The SEM_RELATED operator returns 1 if the two input terms are related with respect to the specified
predExpr relationship within the ontology, and it returns 0 if the two input terms are not related. If the lower and upper bounds are specified, it returns 1 if the two input terms are related with a distance measure that is greater than or equal to
lower_bound and less than or equal to
2.3.2 Using the SEM_DISTANCE Ancillary Operator
The SEM_DISTANCE ancillary operator computes the distance measure for the rows filtered using the SEM_RELATED operator. The SEM_DISTANCE operator has the following format:
SEM_DISTANCE (number) RETURN NUMBER;
number attribute can be any number, as long as it matches the number that is the last attribute specified in the call to the SEM_RELATED operator (see Example 2-10). The number is used to match the invocation of the ancillary operator SEM_DISTANCE with a specific SEM_RELATED (primary operator) invocation, because a query can have multiple invocations of primary and ancillary operators.
Example 2-10 SEM_DISTANCE Ancillary Operator
Example 2-10 expands Example 2-9 to show several statements that include the SEM_DISTANCE ancillary operator, which gives a measure of how closely the two terms (here, a patient's diagnosis and the term
Immune_System_Disorder) are related by measuring the distance between the terms. Using the ontology described in Example: Disease Ontology, the distance between
Immune_System_Disorder is 3.
SELECT diagnosis, SEM_DISTANCE(123) FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1; SELECT diagnosis FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1 ORDER BY SEM_DISTANCE(123); SELECT diagnosis, SEM_DISTANCE(123) FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1 AND SEM_DISTANCE(123) <= 3;
Example 2-11 Using SEM_DISTANCE to Restrict the Number of Rows Returned
Example 2-11 uses distance information to restrict the number of rows returned by the primary operator. All rows with a term related to the object attribute specified in the SEM_RELATED invocation, but with a distance of greater than or equal to 2 and less than or equal to 4, are retrieved.
SELECT diagnosis FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime'), 2, 4) = 1;
In Example 2-11, the lower and upper bounds are specified using the
upper_bound parameters in the SEM_RELATED operator instead of using the SEM_DISTANCE operator. The SEM_DISTANCE operator can be also be used for restricting the rows returned, as shown in the last SELECT statement in Example 2-10.
220.127.116.11 Computation of Distance Information
Distances are generated for the following properties during inference (entailment): OWL properties defined as transitive properties, and RDFS
subClassOf and RDFS
subPropertyOf properties. The distance between two terms linked through these properties is computed as the shortest distance between them in a hierarchical class structure. Distances of two terms linked through other properties are undefined and therefore set to null.
Each transitive property link in the original model (viewed as a hierarchical class structure) has a distance of 1, and the distance of an inferred triple is generated according to the number of links between the two terms. Consider the following hypothetical sample scenarios:
If the original graph contains
C1 rdfs:subClassOf C2and
C2 rdfs:subClassOf C3, then
C1 rdfs:subClassof of C3will be derived. In this case:
C1 rdfs:subClassOf C2: distance = 1, because it exists in the model.
C2 rdfs:subClassOf C3: distance = 1, because it exists in the model.
C1 rdfs:subClassOf C3: distance = 2, because it is generated during inference.
If the original graph contains
P1 rdfs:subPropertyOf P2and
P2 rdfs:subPropertyOf P3, then P1 rdfs:subPropertyOf P3 will be derived. In this case:
P1 rdfs:subPropertyOf P2: distance = 1, because it exists in the model.
P2 rdfs:subPropertyOf P3: distance = 1, because it exists in the model.
P1 rdfs:subPropertyOf P3: distance = 2, because it is generated during inference.
If the original graph contains
C1 owl:equivalentClass C2and
C2 owl:equivalentClass C3, then
C1 owl:equivalentClass C3will be derived. In this case:
C1 owl:equivalentClass C2: distance = 1, because it exists in the model.
C2 owl:equivalentClass C3: distance = 1, because it exists in the model.
C1 owl:equivalentClass C3: distance = 2, because it is generated during inference.
The SEM_RELATED operator works with user-defined rulebases. However, using the SEM_DISTANCE operator with a user-defined rulebase is not yet supported, and will raise an error.
2.3.3 Creating a Semantic Index of Type MDSYS.SEM_INDEXTYPE
When using the SEM_RELATED operator, you can create a semantic index of type MDSYS.SEM_INDEXTYPE on the column that contains the ontology terms. Creating such an index will result in more efficient execution of the queries. The CREATE INDEX statement must contain the
INDEXTYPE IS MDSYS.SEM_INDEXTYPE clause, to specify the type of index being created.
Example 2-12 Creating a Semantic Index
CREATE INDEX diagnosis_sem_idx ON patients (diagnosis) INDEXTYPE IS MDSYS.SEM_INDEXTYPE;
The column on which the index is built (DIAGNOSIS in Example 2-12) must be the first parameter to the SEM_RELATED operator, in order for the index to be used. If it not the first parameter, the index is not used during the execution of the query.
Example 2-13 Creating a Semantic Index Specifying a Model and Rulebase
To improve the performance of certain semantic queries, you can cause statistical information to be generated for the semantic index by specifying one or more models and rulebases when you create the index. Example 2-13 creates an index that will also generate statistics information for the specified model and rulebase. The index can be used with other models and rulebases during query, but the statistical information will be used only if the model and rulebase specified during the creation of the index are the same model and rulebase specified in the query.
CREATE INDEX diagnosis_sem_idx ON patients (diagnosis) INDEXTYPE IS MDSYS.SEM_INDEXTYPE('ONTOLOGY_MODEL(medical_ontology), RULEBASE(OWLPrime)');
Example 2-14 Query Benefitting from Generation of Statistical Information
The statistical information is useful for queries that return top-k results sorted by semantic distance. Example 2-14 shows such a query.
SELECT /*+ FIRST_ROWS */ diagnosis FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime'), 123) = 1 ORDER BY SEM_DISTANCE(123);
2.3.4 Using SEM_RELATED and SEM_DISTANCE When the Indexed Column Is Not the First Parameter
If an index of type MDSYS.SEM_INDEXTYPE has been created on a table column that is the first parameter to the SEM_RELATED operator, the index will be used. For example, the following query retrieves all rows that have a value in the DIAGNOSIS column that is a subclass of (
SELECT diagnosis FROM patients WHERE SEM_RELATED (diagnosis, '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;
Assume, however, that this query instead needs to retrieve all rows that have a value in the DIAGNOSIS column for which
Immune_System_Disorder is a subclass. You could rewrite the query as follows:
SELECT diagnosis FROM patients WHERE SEM_RELATED ('<http://www.example.org/medical_terms/Immune_System_Disorder>', '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', diagnosis, sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;
However, in this case a semantic index on the DIAGNOSIS column will not be used, because it is not the first parameter to the SEM_RELATED operator. To cause the index to be used, you can change the preceding query to use the
inverseOf keyword, as follows:
SELECT diagnosis FROM patients WHERE SEM_RELATED (diagnosis, 'inverseOf(http://www.w3.org/2000/01/rdf-schema#subClassOf)', '<http://www.example.org/medical_terms/Immune_System_Disorder>', sem_models('medical_ontology'), sem_rulebases('owlprime')) = 1;
This form causes the table column (on which the index is built) to be the first parameter to the SEM_RELATED operator, and it retrieves all rows that have a value in the DIAGNOSIS column for which
Immune_System_Disorder is a subclass.
2.3.5 Using URIPREFIX When Values Are Not Stored as URIs
By default, the semantic operator support assumes that the values stored in the table are URIs. These URIs can be from different namespaces. However, if the values in the table do not have URIs, you can use the URIPREFIX keyword to specify a URI when you create the semantic index. In this case, the specified URI is prefixed to the value in the table and stored in the index structure. (One implication is that multiple URIs cannot be used).
Example 2-15 creates a semantic index that uses a URI prefix.
Example 2-15 Specifying a URI Prefix During Semantic Index Creation
CREATE INDEX diagnosis_sem_idx ON patients (diagnosis) INDEXTYPE IS MDSYS.SEM_INDEXTYPE PARAMETERS('URIPREFIX(<http://www.example.org/medical/>)');
The slash (/) character at the end of the URI is important, because the URI is prefixed to the table value (in the index structure) without any parsing.