4 Provisioning Oracle Database Appliance Baremetal System
Understand the process to configure Oracle Database Appliance baremetal system.
The Web Console is the preferred method of deploying your bare metal platform configuration. The Web Console provides all of the fields necessary to provision Oracle Database Appliance, including configuring the system, network, database, and Oracle Auto Service Request (Oracle ASR). If you prefer to use the command-line interface, you must create a JSON file to configure the deployment options.
- Plumbing the Network
Plumb the Oracle Database Appliance network with the public internet protocol (IP) information assigned to a node, to enable provisioning of the Oracle Database Appliance software. - Verifying Cabling and Network Connections
After powering on Oracle Database Appliance, verify that the network connections are set up correctly. - Downloading Oracle Database Appliance Software
Download Oracle Database Appliance software and copy to a temporary location before applying updates to your appliance. - Installing Oracle Database Appliance Software
Install Oracle Database Appliance software, before creating the appliance. - Creating the Appliance
Create the appliance using the Web Console.
Plumbing the Network
Plumb the Oracle Database Appliance network with the public internet protocol (IP) information assigned to a node, to enable provisioning of the Oracle Database Appliance software.
Example 4-1 Example of a Bonded Configuration
For a bonded configuration, answer yes to using a bonding public interface and configure the first network to use a btbond1
interface without configuring DHCP.
# /opt/oracle/dcs/bin/odacli configure-firstnet
Using bonding public interface (yes/no) [yes]: yes
Select the Interface to configure the network on (btbond1): btbond1
Configure DHCP on btbond1 (yes/no): no
INFO: You have chosen Static configuration
Enter the IP address to configure: 10.1.10.2
Enter the Netmask address to configure: 255.255.255.0
Enter the Gateway address to configure: 10.1.10.1
INFO: Plumbing the IPs now
INFO: Restarting the network
Shutting down interface btbond1: bonding: btbond1: Removing slave em2.
bonding: btbond1: releasing active interface em2
bonding: btbond1: making interface em3 the new active one.
bonding: btbond1: Removing slave em3.
bonding: btbond1: releasing active interface em3
::::::::::
Example 4-2 Example of a Non-Bonded Configuration
To create a non-bonded configuration and disable VLAN capabilities, answer no
to using a bonding public interface.
# /opt/oracle/dcs/bin/odacli configure-firstnet
Using bonding public interface (yes/no) [yes]: no
INFO: Breaking the bonding on btbond1
INFO: remove bonding module: rmmod bonding
INFO: remove slave setup in /etc/sysconfig/network-scripts/ifcfg-em2
INFO: remove slave setup in /etc/sysconfig/network-scripts/ifcfg-em3
INFO: Restarting the network
Shutting down interface em1: [ OK ]
Shutting down interface p1p1: [ OK ]
Shutting down interface p1p2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface em1: [ OK ]
Bringing up interface em2: [ OK ]
Bringing up interface em3: [ OK ]
Bringing up interface p1p1:
Determining if ip address 192.168.16.24 is already in use for device p1p1...
[ OK ]
Bringing up interface p1p2:
Determining if ip address 192.168.17.24 is already in use for device p1p2...
[ OK ]
INFO: Restarting the network
Select the Interface to configure the network on (em2 em3) [em2]:
Configure DHCP on em2 (yes/no) [no]:
INFO: You have chosen Static configuration
Enter the IP address to configure : 10.1.10.2
Enter the Netmask address to configure : 255.255.255.0
Enter the Gateway address to configure[10.1.10.1] :
INFO: Plumbing the IPs now
/usr/share/system-config-network/netconfpkg/NCHostsList.py:100:
DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
badlines.append((num, value_exception.message))
/usr/share/system-config-network/netconfpkg/NCHostsList.py:105:
DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
""" % (value_exception.message, num)
/usr/share/system-config-network/netconfpkg/NCProfileList.py:142:
DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
self.error = e.message
INFO: Restarting the network
Shutting down interface em1: [ OK ]
Shutting down interface em2: [ OK ]
Shutting down interface em3: [ OK ]
Shutting down interface p1p1: [ OK ]
Shutting down interface p1p2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface em1: [ OK ]
Bringing up interface em2:
Determining if ip address 10.1.10.2 is already in use for device em2...
[ OK ]
Bringing up interface em3: [ OK ]
Bringing up interface p1p1:
Determining if ip address 192.0.2.24 is already in use for device p1p1...
[ OK ]
Bringing up interface p1p2:
Determining if ip address 192.0.2.25 is already in use for device p1p2...
[ OK ]
Example 4-3 Example of Configuring VLAN
# /opt/oracle/dcs/bin/odacli configure-firstnet
Using bonding public interface (yes/no) [yes]:
Select the Interface to configure the network on (btbond1) [btbond1]:
Configure DHCP on btbond1 (yes/no) [no]:
INFO: You have chosen Static configuration
Use VLAN on btbond1 (yes/no) [no]:yes
Configure VLAN on btbond1, input VLAN ID [2 - 4094] 122
INFO: using network interface btbond1.122
Enter the IP address to configure : 192.0.2.24
Enter the Netmask address to configure : 192.0.2.24
Enter the Gateway address to configure[192.0.2.24] :
INFO: Restarting the network
Shutting down interface btbond1: [ OK ]
Shutting down interface em1: [ OK ]
Shutting down interface p1p1: [ OK ]
Shutting down interface p1p2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface btbond1:
Determining if ip address 192.0.2.24 is already in use for device btbond1...
[ OK ]
Bringing up interface em1: [ OK ]
Bringing up interface p1p1:
Determining if ip address 192.0.2.24 is already in use for device p1p1... [ OK ]
Bringing up interface p1p2:
Determining if ip address 192.0.2.24 is already in use for device p1p2...
[ OK ]
Bringing up interface btbond1.122:
Determining if ip address 192.0.2.24 is already in use for device btbond1.122...
[ OK
INFO: Restarting the DCS agent
initdcsagent stop/waiting
initdcsagent start/running, process 32104
Verifying Cabling and Network Connections
After powering on Oracle Database Appliance, verify that the network connections are set up correctly.
Downloading Oracle Database Appliance Software
Download Oracle Database Appliance software and copy to a temporary location before applying updates to your appliance.
Parent topic: Provisioning Oracle Database Appliance Baremetal System
Installing Oracle Database Appliance Software
Install Oracle Database Appliance software, before creating the appliance.
Creating the Appliance
Create the appliance using the Web Console.
After deployment, the root
and database users SYS
, SYSTEM
, and PDBADMIN
are set to the system password. The oracle
and grid
passwords are set to the default password. Change these passwords to comply with your user security protocols.