1. Release Notes
  2. Known Issues with Oracle Database Appliance in This Release

4 Known Issues with Oracle Database Appliance in This Release

The following are known issues deploying, updating, and managing Oracle Database Appliance in this release.

Known Issues When Patching Oracle Database Appliance

Understand the known issues when patching Oracle Database Appliance to this release.

Parent topic: Known Issues with Oracle Database Appliance in This Release

Error in patching

When patching Oracle Database Appliance, an error may be encountered.

When patching from Oracle Database Appliance release 19.11 or 19.12 to release 19.14, the following error message may be displayed:
PRGO-1664 : THE SPECIFIED SOURCE WORKING COPY "ORAGRID19000" IS A SOFTWARE-ONLY WORKING COPY

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Manually run the command odacli update-registry -n system -f on one node after updating the DCS agent to release 19.14. Continue with the server patching.
Odacli update-dcsagent -v 19.14.0.0.0
Odacli update-registry -n system -f 
Odacli create-prepatchreport -v 19.14.0.0.0 -s
odacli update-server -v 19.14.0.0.0

This issue is tracked with Oracle bug 33762205.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in server patching

When patching Oracle Database Appliance which already has STIG V1R2 deployed, an error may be encountered.

On an Oracle Database Appliance deployment with release earlier than 19.14, if the Security Technical Implementation Guidelines (STIG) V1R2 is already deployed, then when you patch to 19.14 or earlier, and run the command odacli update-server -f version, an error may be displayed.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

The STIG V1R2 rule OL7-00-040420 tries to change the permission of the file /etc/ssh/ssh_host_rsa_key from '640' to '600' which causes the error. During patching, run the command chmod 600 /etc/ssh/ssh_host_rsa_key command on both nodes.

This issue is tracked with Oracle bug 33168598.

Parent topic: Known Issues When Patching Oracle Database Appliance

AHF error in prepatch report for the update-dbhome command

When you patch server to Oracle Database Appliance release 19.14, the odacli update-dbhome command may fail.

The following error message is displayed in the pre-patch report:
Verify the Alternate Archive    Failed    AHF-4940: One or more log archive 
Destination is Configured to              destination and alternate log archive
Prevent Database Hangs                    destination settings are not as recommended

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. Run the odacli update-dbhome command with the -f option.
    /opt/oracle/dcs/bin/odacli update-dbhome --dbhomeid 7c67c5b4-f585-4ba9-865f-c719c63c0a6e -v 19.14.0.0.0 -f

This issue is tracked with Oracle bug 33144170.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in running the update-dbhome command

When you patch database homes to Oracle Database Appliance release 19.14, the odacli update-dbhome command may fail.

For Oracle Database Appliance release 19.14, when you run the odacli update-dbhome command, due to the inclusion of the non-rolling DST patch, the job waits for 12,000 seconds (around 3.5 hours). The following error message is displayed:
PRCC-1021 : One or more of the submitted commands did not execute successfully.
PRCC-1025 : Command submitted on node <node_name> timed out after 12,000 seconds.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. Shut down and restart database the failed database and run the datapatch script manually to complete the database update.
    db_home_path_the_database_is_running_on/OPatch/datapatch
  2. If the database is an Oracle ACFS database that was patched from a release earlier than 19.11, then run the odacli list-dbstorages command, and locate the corresponding entries by db_unique_name. Check the DATA and RECO destination location if they exist in the result.
  3. For DATA destination location, the value should be similar to the following:
    /u02/app/oracle/oradata/db_unique_name
  4. For RECO, pre-process the values from the beginning to the last forward slash (/). For example:
    /u03/app/oracle
addlFS = /u01/app/odaorahome,/u01/app/odaorabase0(for single-node systems)
addlFS = /u01/app/odaorahome,/u01/app/odaorabase0, /u01/app/odaorabase1(for high availability systems)
  5. Run the srvctl command db_home_path_the_database_is_running_on/bin/srvctl modify database -d db_unique_name -acfspath $data, $reco, $addlFS -diskgroup DATA. For example:
    srvctl modify database -d provDb0 -acfspath
/u02/app/oracle/oradata/provDb0,/u03/app/oracle/,/u01/app/odaorahome,/u01/app/
odaorabase0 -diskgroup DATA

This issue is tracked with Oracle bug 32740491.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in patching prechecks report

The patchung prechecks report may display an error.

The following error message may be displayed:
Failure in the pre-patch report caused by “AHF-5190: operating system boot device order is not configured as recommended”

Hardware Models

Oracle Database Appliance X-7 hardware models

Workaround

Run the odacli update-server or odacli update-dbhome command with the -f option.

This issue is tracked with Oracle bug 33631256.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in patching database

When you patch Oracle Database 19c Standard Edition single-instance or Oracle RAC One Node database, an error is encountered.

Hardware Models

All Oracle Database Appliance hardware models high-availability systems

Workaround

Before patching the database home, restart the Oracle Database 19c Standard Edition single-instance or Oracle RAC One Node database:
srvctl stop database -database db_unique_name
srvctl start database -database db_unique_name

This issue is tracked with Oracle bug 33178198.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in updating dbhome

When you patch database homes to Oracle Database Appliance release 19.14, the odacli update-dbhome command may fail.

The following error message is displayed:
PRGH-1153 : RHPHelper call to get runing nodes failed for DB: "GIS_IN"

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Ensure that the database instances are running before you run the odacli update-dbhome command. Do not manually stop the database before updating it.

This issue is tracked with Oracle bug 33114855.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error when patching DB systems

When patching DB systems on Oracle Database Appliance, an error may be encountered.

When a DB system node, which has Oracle Database Appliance 19.14, reboots, the ora packages repository is not mounted automatically. The DCS Agent does not mount the repositories causing a failure in operations that needs repository access, such as patching.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

When you restart the bare metal system, the DCS Agent on the bare metal system restarts NFS on both nodes. Follow these steps to remount the repository on the DB system:
  1. On the VM mount pkgrepos directory, on the first node, run these steps:
    cp /opt/oracle/oak/pkgrepos/System/VERSION /opt/oracle/oak/conf/VERSION
mount 192.168.17.2:/opt/oracle/oak/pkgrepos /opt/oracle/oak/pkgrepos

    For InfiniBand environments:

    mount 192.168.16.24:/opt/oracle/oak/pkgrepos /opt/oracle/oak/pkgrepos
  2. On the VM mount pkgrepos directory, on the second node, run these steps:
    cp /opt/oracle/oak/pkgrepos/System/VERSION /opt/oracle/oak/conf/VERSION
mount 192.168.17.3:/opt/oracle/oak/pkgrepos /opt/oracle/oak/pkgrepos

    For InfiniBand environments:

    mount 192.168.16.25:/opt/oracle/oak/pkgrepos /opt/oracle/oak/pkgrepos
  3. Patch the DB system with the same steps as when patching the bare metal system:
        odacli update-dcsadmin -v 19.14.0.0.0
    odacli update-dcscomponents -v 19.14.0.0.0
    odacli update-dcsagent -v 19.14.0.0.0
    odacli create-prepatchreport -v 19.14.0.0.0 -s
    odacli update-server -v 19.14.0.0.0
    odacli create-prepatchreport -v 19.14.0.0.0 -d -i id
    odacli update-dbhome -v 19.14.0.0.0 -i id -f -imp

This issue is tracked with Oracle bug 33217680.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in running the update-dbhome command

When you patch database homes to Oracle Database Appliance release 19.11, the odacli update-dbhome command fails.

For Oracle Database Appliance release 19.11, when you run the odacli update-dbhome command, due to the inclusion of the non-rolling DST patch, the job waits for 12,000 seconds (around 3.5 hours). The following error message is displayed:
DCS-10001:Internal error encountered: PRCC-1021 :
One or more of the submitted commands did not execute successfully.
PRCC-1025 : Command submitted on node cdb1 timed out after 12,000 seconds..
The rhp.log file contains the following entries:
"PRGO-1693 : The database patching cannot be completed in a rolling manner because the target patched home at "/u01/app/odaorahome/oracle/product/19.0.0.0/dbhome_4" contains non-rolling bug fixes "32327201" compared to the source home at "/u01/app/oracle/product/19.0.0.0/dbhome_1"

Hardware Models

All Oracle Database Appliance hardware models with Oracle Database Appliance release 19.11

Workaround

Shut down and restart database the failed database and run the datapatch script manually to complete the database update.
 /u01/app/odaorahome/oracle/product/19.0.0.0/dbhome_4/OPatch/datapatch

This issue is tracked with Oracle bug 32801095.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error message displayed even when patching Oracle Database Appliance is successful

Although patching of Oracle Database Appliance was successful, an error message may be displayed.

The following error is seen when running the odacli update-dcscomponents command: 
# time odacli update-dcscomponents -v 19.14.0.0.0 
^[[ADCS-10008:Failed to update DCScomponents: 19.14.0.0.0
Internal error while patching the DCS components : 
DCS-10231:Cannot proceed. Pre-checks for update-dcscomponents failed. Refer  
to /opt/oracle/dcs/log/-dcscomponentsPreCheckReport.log on node 1 for  
details.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

This is a timing issue with setting up the SSH equivalence.

Run the odacli update-dcscomponents command again and the operation completes successfully.

This issue is tracked with Oracle bug 32553519.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error in patching database homes

An error is encountered when patching database homes on databases that have Standard Edition High Availability enabled.

When running the command odacli update-dbhome -v release_number on database homes that have Standard Edition High Availability enabled, an error is encountered.
WARNING::Failed to run the datapatch as db <db_name> is not in running state

Hardware Models

All Oracle Database Appliance hardware models with High-Availability deployments

Workaround

Follow these steps:
  1. Locate the running node of the target database instance:
    srvctl status database -database dbUniqueName
    Or, relocate the single-instance database instance to the required node:
    odacli modify-database -g node_number (-th node_name)
  2. On the running node, manually run the datapatch for non-CDB databases: 
    dbhomeLocation/OPatch/datapatch
  3. For CDB databases, locate the PDB list using SQL*Plus.
    select name from v$containers where open_mode='READ WRITE';
dbhomeLocation/OPatch/datapatch -pdbs pdb_names_found_in_previous_step_divided_by_comma

This issue is tracked with Oracle bug 31654816.

Parent topic: Known Issues When Patching Oracle Database Appliance

Server status not set to Normal when patching

When patching Oracle Database Appliance, an error is encountered.

When patching the appliance, the odacli update-server command fails with the following error: 

DCS-10001:Internal error encountered: Server upgrade state is not NORMAL node_name

Hardware Models

All Oracle Database Appliance hardware models

Workaround

  1. Run the command:
    Grid_home/bin/cluvfy stage -post crsinst -collect cluster -gi_upgrade -n all
  2. Ignore the following two warnings:
    Verifying OCR Integrity ...WARNING
PRVG-6017 : OCR backup is located in the same disk group "+DATA" as OCR.

Verifying Single Client Access Name (SCAN) ...WARNING
RVG-11368 : A SCAN is recommended to resolve to "3" or more IP

  3. Run the command again till the output displays only the two warnings above. The status of Oracle Custerware status should be Normal again.

  4. You can verify the status with the command:
    Grid_home/bin/crsctl query crs activeversion -f

This issue is tracked with Oracle bug 30099090.

Parent topic: Known Issues When Patching Oracle Database Appliance

Error when patching to 12.1.0.2.190716 Bundle Patch

When patching Oracle Database release 12.1.0.2 to Oracle Database 12.1.0.2.190716 Bundle Patch, an error is encountered.

The ODACLI job displays the following error:

DCS-10001:Internal error encountered: Failed to run SQL script: datapatch script.

The data patch log contains the entry "Prereq check failed, exiting without installing any patches.".

Hardware Models

All Oracle Database Appliance hardware models bare metal deployments

Workaround

Install the same patch again.

This issue is tracked with Oracle bugs 30026438 and 30155710.

Parent topic: Known Issues When Patching Oracle Database Appliance

Patching of M.2 drives not supported

Patching of M.2 drives (local disks SSDSCKJB48 and SSDSCKJB480G7) is not supported.

These drives are displayed when you run the odacli describe-component command. Patching of neither of the two known versions 0112 and 0121 of the M.2 disk is supported. Patching the LSI controller version 13.00.00.00 to version 16.00.01.00 is also not supported. However, on some Oracle Database Appliance X8-2 models, the installed LSI controller version may be 16.00.01.00.

Hardware Models

Oracle Database Appliance bare metal deployments

Workaround

None

This issue is tracked with Oracle bug 30249232.

Parent topic: Known Issues When Patching Oracle Database Appliance

Known Issues When Deploying Oracle Database Appliance

Understand the known issues when provisioning or deploying Oracle Database Appliance.

Parent topic: Known Issues with Oracle Database Appliance in This Release

Error in accessing Browser User Interface

When accessing the Browser User Interface (BUI), an error may be encountered.

The following error message is displayed:
Internal Server Error
_links
self
href "/mgmt/index.html"
templated false
_embedded
errors
0
Internal Server Error: Could not find file

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Restart DCS controller:
systemctl restart initdcscontroller

This issue is tracked with Oracle bug 33837031.

Parent topic: Known Issues When Deploying Oracle Database Appliance

ODACLI command output not included in system report

On Oracle Database Appliance which has multi-user access enabled, ODACLI command output is not included in the system report.

The system report generated by Oracle Trace File Analyzer Collector does not have the output for ODACLI commands as the ODACLI commands do not run in the absence of required authentication.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Generate the output of the ODACLI commands separately and then provide the output to Oracle Support, if needed.

This issue is tracked with Oracle bug 33786157.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in creating two DB systems

When creating two DB systems concurrently in two different Oracle ASM disk groups, an error is encountered.

When attempting to start the DB systems, the following error message is displayed:
CRS-2672: Attempting to start 'vm_name.kvm' on 'oda_server'
CRS-5017: The resource action "vm_name.kvm start" encountered the following
error:
CRS-29200: The libvirt virtualization library encountered the following
error:
Timed out during operation: cannot acquire state change lock (held by
monitor=remoteDispatchDomainCreate)
. For details refer to "(:CLSN00107:)" in
"/u01/app/grid/diag/crs/<oda_server>/crs/trace/crsd_orarootagent_root.trc".
CRS-2674: Start of 'vm_name.kvm' on 'oda_server' failed
CRS-2679: Attempting to clean 'vm_name.kvm' on 'oda_server'
CRS-2681: Clean of 'vm_name.kvm' on 'oda_server' succeeded
CRS-4000: Command Start failed, or completed with errors.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Do not create two DB systems concurrently. Instead, complete the creation of one DB system and then create the other.

This issue is tracked with Oracle bug 33275630.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in reprovisioning DB system

When reprovisioning a DB system on Oracle Database Appliance with the same name as the DB system that existed earlier and was deleted, an error may be encountered.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Delete all non-OMF paths created with the earlier DB system before reprovisioning a DB system.

This issue is tracked with Oracle bug 33829611.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in creating database

When creating a database on Oracle Database Appliance, an error may be encountered.

The database creation job fails if the database name contains an underscore (for example, db_1). The following error message may be displayed:
DCS-10001:Internal error encountered: Failed to copy password file for database.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Do not use underscore in the database name.

This issue is tracked with Oracle bug 33816343.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in creating DB system

When creating a DB system on Oracle Database Appliance, an error may be encountered.

When running the odacli create-dbsystem command, the following error message may be displayed:
DCS-10001:Internal error encountered: ASM network is not online in all nodes

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. Manually bring the offline resources online:
    crsctl start res -all
  2. Run the odacli create-dbsystem command.

This issue is tracked with Oracle bug 33784937.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in recovering a TDE-enabled database

When recovering a TDE-enabled Oracle RAC One Node database from the remote node, after the database was shut down, an error may be encountered.

When attempting to start the TDE-enabled Oracle RAC One Node database from the remote node, that is, the node other than node mentioned in the dbTargetNodeNumber in the database object, then the following error message may be displayed: 

DCS-10001:Internal error encountered: DCS-10001:Internal error encountered:
Missing arguments : required sqlplus connection information is not provided..

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Run the odacli recover-database command from the node mentioned in the dbTargetNodeNumber in the database object.

This issue is tracked with Oracle bug 33851593.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in registering a TDE-enabled database

When registering a TDE-enabled database that was created using RMAN, an error is encountered.

The following error message is displayed:

DCS-10107:Tde wallet does not exist at location :
/opt/oracle/dcs/commonstore/wallets/tde/DB_UNIQUE_NAME>.Please copy the wallet to proceed.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Run the following commands:
  1. Log in as the oracle user.
    su - oracle
  2. Navigate to the /opt/oracle/dcs/commonstore/wallets/tde/ directory.
    cd /opt/oracle/dcs/commonstore/wallets/tde/
  3. Create the DB_UNIQUE_NAME using uppercase letters.
    mkdir DB_UNIQUE_NAME
  4. Copy the TDE wallets to the DB_UNIQUE_NAME directory.
  5. Retry database registration.

This issue is tracked with Oracle bug 28080413.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in recovering a database

When recovering a database on Oracle Database Appliance, an error is encountered.

When you run the command odacli recover-database on a Standard Edition High Availability database, the following error message is displayed:
DCS-10001:Internal error encountered: Unable to get valid database node number to post recovery.

Hardware Models

All Oracle Database Appliance high-availability hardware models

Workaround

Run the following commands:
srvctl config database -db db_name  | grep “Configured nodes” | awk  
‘{print $3}’, whose output is nodeX,nodeY 
srvctl modify database -db db_name -node nodeX 
odacli recover-database 
srvctl stop database -db db_name 
srvctl modify database -db db_name -node nodeX,nodeY 
srvctl start database -db db_name

This issue is tracked with Oracle bug 32928688.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in adding JBOD

When you add a second JBOD to your Oracle Database Appliance deployment on which a DB system is running, an error is encountered.

The following error message is displayed:
ORA-15333: disk is not visible on client instance

Hardware Models

All Oracle Database Appliance hardware models bare metal and dbsystem

Workaround

Shut down dbsystem before adding the second JBOD. 
systemctl restart initdcsagent

This issue is tracked with Oracle bug 32586762.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in provisioning appliance after running cleanup.pl

Errors encountered in provisioning applince after running cleanup.pl.

After running cleanup.pl, provisioning the appliance fails because of missing Oracle Grid Infrastructure image (IMGGI191100). The following error message is displayed: 

DCS-10042:User oda-cliadmin cannot be authorized.

Hardware Models

All Oracle Database Appliance hardware models for bare metal deployments

Workaround

After running cleanup.pl, and before provisioning the appliance, update the repository as follows:

# odacli update-repository -f /**gi**

This issue is tracked with Oracle bug 32707387.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in updating a database

When updating a database on Oracle Database Appliance, an error is encountered.

When you run the command odacli update-dbhome, the following error message is displayed:
PRGO-1069 :Internal error [# rhpmovedb.pl-isPatchUpg-1 #]..

To confirm that the MMON process occupies the lock, connect to the target database which failed to patch, and run the command:

SELECT s.sid, p.spid, s.machine, s.program FROM v$session s, v$process p  
WHERE s.paddr = p.addr and s.sid = ( 
SELECT sid from v$lock WHERE id1= ( 
SELECT lockid FROM dbms_lock_allocated WHERE name = 'ORA$QP_CONTROL_LOCK' 
));

If in the displayed result, s.program in the output is similar to to the format oracle_user@host_box_name (MMON), then the error is caused by the MMON process. Run the workaround to address this issue.

Hardware Models

All Oracle Database Appliance high-availability hardware models

Workaround

Run the following commands:
  1. Stop the MMON process:
    # ps -ef | grep MMON 
root     71220 70691  0 21:25 pts/0    00:00:00 grep --color=auto MMON
    Locate the process ID from step (1) and stop it:
    # kill -9 71220
  2. Manually run datapatch on target database:
    1. Locate the database home where the target database is running:
      odacli describe-database -in db_name
    2. Locate the database home location:
      odacli describe-dbhome -i DbHomeID_found_in_step_a
    3. On the running node of the target database:
      [root@node1 ~]# sudo su - oracle 
Last login: Thu Jun  3 21:24:45 UTC 2021 
[oracle@node1 ~]$ . oraenv 
ORACLE_SID = [oracle] ? db_instance_name
ORACLE_HOME = [/home/oracle] ? dbHome_location
    4. If the target database is a non-CDB database, then run the following:
      $ORACLE_HOME/OPatch/datapatch
    5. If the target database is a CDB database, then run the following to find the PDB list:
      select name from v$containers where open_mode="READ WRITE";
    6. Exit SQL*Plus and run the following:
      $ORACLE_HOME/OPatch/datapatch -pdbs pdb_names_gathered_by_the_SQL_statement_in_step_e_separated_by_comma

This issue is tracked with Oracle bug 32827353.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error in running tfactl diagcollect command on remote node

When running the tfactl diagcollect command on Oracle Database Appliance, an error is encountered.

Hardware Models

All Oracle Database Appliance hardware models KVM and bare metal systems

Workaround

Prior to Oracle Autonomous Health Framework 21.2, if the certificates are generated on each node separately, then you must perform either of the following manual steps to fix this.
  • Run the following command on each node so that Oracle Trace File Analyzer generates new certificates and distributes to the other node:
    tfactl syncnodes -remove -local
  • Connect using SSH with root credentials on one node and run the following.
    tfactl syncnodes

This issue is tracked with Oracle bug 32921859.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error when upgrading database from 11.2.0.4 to 12.1 or 12.2

When upgrading databases from 11.2.0.4 to 12.1 or 12.2, an error is encountered.

Database upgrade can cause the following warning in the UpgradeResults.html file, when upgrading database from 11.2.0.4 to 12.1 or 12.2: 
Database is using a newer time zone file version than the Oracle home

Hardware Models

All Oracle Database Appliance bare metal deployments

Workaround

  1. Refer to the Database Upgrade Guide for manual steps for fixing the time zone.
  2. After manually completing the database upgrade, run the following command to update DCS metadata:
    /opt/oracle/dcs/bin/odacli update-registry update-registry -n db -f

This issue is tracked with Oracle bug 31125985.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error when upgrading 12.1 single-instance database

When upgrading 12.1 single-instance database, a job failure error is encountered.

Hardware Models

All Oracle Database Appliance hardware models bare metal deployments

Workaround

Use the following workaround:
  1. Before upgrading the 12.1 single-instance database, run the following PL/SQL command to change the local_listener to an empty string: 
    ALTER SYSTEM SET LOCAL_LISTENER='';
  2. After upgrading the 12.1 single-instance database successfully, run the following PL/SQL command to change the local_listener to the desired value: 
    ALTER SYSTEM SET LOCAL_LISTENER='-oracle-none-';

This issue is tracked with Oracle bugs 31202775 and 31214657.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Failure in creating RECO disk group during provisioning

When provisioning Oracle Database Appliance X8-2-HA with High Performance configuration containing default storage and expansion shelf, creation of RECO disk group fails.

Hardware Models

All Oracle Database Appliance X8-2-HA with High Performance configuration

Workaround

  1. Power off storage expansion shelf.
  2. Reboot both nodes.
  3. Proceed with provisioning the default storage shelf (first JBOD).
  4. After the system is successfully provisioned with default storage shelf (first JBOD), check that oakd is running on both nodes in foreground mode.
     # ps -aef | grep oakd
  5. Check that all first JBOD disks have the status online, good in oakd, and CACHED in Oracle ASM.
  6. Power on the storage expansion shelf (second JBOD), wait for a few minutes for the operating system and other subsystems to recognize it.
  7. Run the following command from the master node to add the storage expansion shelf disks (two JBOD setup) to oakd and Oracle ASM. 
    #odaadmcli show ismaster 
      OAKD is in Master Mode 

      # odaadmcli expand storage -ndisk 24 -enclosure 1 
       Skipping precheck for enclosure '1'... 
       Check the progress of expansion of storage by executing 'odaadmcli  
show disk' 
       Waiting for expansion to finish ... 
      #
  8. Check that the storage expansion shelf disks (two JBOD setup) are added to oakd and Oracle ASM.

Replace odaadmcli with oakcli commands on Oracle Database Appliance Virtualized Platform in the procedure.

For more information, see the chapter Managing Storage in the Oracle Database Appliance X8-2 Deployment Guide.

This issue is tracked with Oracle bug 30839054.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Simultaneous creation of two Oracle ACFS Databases fails

If you try to create two Oracle ACFS databases on a system where there is no database or database storage already created, then database creation fails for one of the databases with an error.

DCS-10001:Internal error encountered: Fail to run command Failed to create  
volume.

Hardware Models

All Oracle Database Appliance bare metal deployments

Workaround

Manually delete the DATA volume (and REDO volume, in case of Oracle Database Appliance X8-2) from the system.

For High Perfomance configuration, run the following commands:
su - GRID_USER 
export ORACLE_SID=+ASM1(in case of first node) /+ASM2(in case of second 
node); 
export ORACLE_HOME=GRID_HOME; 
GRID_HOME/bin/asmcmd --nocp voldelete -G Data datdbname
For Oracle Database Appliance X8-2 High Perfomance configuration, remove the REDO volume as follows:
su - GRID_USER 
export ORACLE_SID=+ASM1(in case of first node) /+ASM2(in case of second 
node); 
export ORACLE_HOME=GRID_HOME; 
GRID_HOME/bin/asmcmd --nocp voldelete -G Reco rdodbname
For High Capacity configuration, run the following commands:
su - GRID_USER 
export ORACLE_SID=+ASM1(in case of first node) /+ASM2(in case of second 
node); 
export ORACLE_HOME=GRID_HOME; 
GRID_HOME/bin/asmcmd --nocp voldelete -G Flash datdbname (if volume exists in FLASH disk group)
GRID_HOME/bin/asmcmd --nocp voldelete -G data datdbname (if volume exists in DATA disk group)
For Oracle Database Appliance X8-2 High Capacity configuration, remove the REDO volume as follows:
su - GRID_USER 
export ORACLE_SID=+ASM1(in case of first node) /+ASM2(in case of second 
node); 
export ORACLE_HOME=GRID_HOME; 
GRID_HOME/bin/asmcmd --nocp voldelete -G Flash rdodbname

This issue is tracked with Oracle bug 30750497.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Error encountered after running cleanup.pl

Errors encountered in running odacli commands after running cleanup.pl.

After running cleanup.pl, when you try to use odacli commands, the following error is encountered: 

DCS-10042:User oda-cliadmin cannot be authorized.

Hardware Models

All Oracle Database Appliance hardware models for bare metal deployments

Workaround

Run the following commands to set up the credentials for the user oda-cliadmin on the agent wallet: 

# rm -rf /opt/oracle/dcs/conf/.authconfig  
# /opt/oracle/dcs/bin/setupAgentAuth.sh

This issue is tracked with Oracle bug 29038717.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Errors in clone database operation

Clone database operation fails due to errors.

If the source database is single-instance or Oracle RAC One Node, or running on the remote node, the clone database operation fails, because the paths are not created correctly in the control file.

Clone database operation may also fail with errors if the source database creation time stamp is too close to the clone operation (at least within 60 minutes).

Hardware Models

All Oracle Database Appliance high-availability hardware models for bare metal deployments

Workaround

Create the clone database from the source database instance that is running on the same node from which the clone database creation is triggered.

For Oracle Database 12c and later, synchronize the source database before the clone operation, by running the command:
SQL> alter system checkpoint;

This issue is tracked with Oracle bugs 29002563, 29002004, 29001906, 29001855, 29001631, 28995153, 28986643, 30309971, and 30228362.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Clone database operation fails

For Oracle Database release 12.1 databases, the database clone creation may fail because the default compatible version from Oracle binaries was set to 12.0.0.0.0

Hardware Models

All Oracle Database Appliance high-availability hardware models for bare metal deployments

Workaround

Set the compatible value to that of the source database. Follow these steps:
  1. Change the parameter value.
    SQL> ALTER SYSTEM SET COMPATIBLE = '12.1.0.2.0' SCOPE=SPFILE;
  2. Shut down the database.
    SQL> SHUTDOWN IMMEDIATE
  3. Start the database.
    SQL> Startup
  4. Verify the parameter for the new value.
    SQL> SELECT name, value, description FROM v$parameter WHERE name ='compatible';

This issue is tracked with Oracle bug 30309914.

Parent topic: Known Issues When Deploying Oracle Database Appliance

Known Issues When Managing Oracle Database Appliance

Understand the known issues when managing or administering Oracle Database Appliance.

Parent topic: Known Issues with Oracle Database Appliance in This Release

Error in back up of database

When backing up a database on Oracle Database Appliance, an error is encountered.

After successful failover, running the command odacli create-backup on new primary database fails with the following message:
DCS-10001:Internal error encountered: Unable to get the
rman command status commandid:xxx
output:STATUS
-------------------------
[COMPLETED WITH WARNINGS] error:.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. On the new primary database, connect to RMAN as oracle and edit the archivelog deletion policy.
    rman target /
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 1 TIMES TO 'SBT_TAPE';
  2. On the new primary database, as the root user, take a backup:
    odacli create-backup -in db_name -bt backup_type

This issue is tracked with Oracle bug 33181168.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in automatic back up of database

When patching Oracle Database Appliance, there may be an error in automatic backup of database.

The following message is displayed:
DCS-10001:Internal error encountered: 1.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

After the appliance is successfully patched, the automatic database backup processes complete successfully.

This issue is tracked with Oracle bug 33699091.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in starting VM after updating CPU cores

After changing the CPU cores using the odacli update-cpucores command, the VM may fail to start.

The following error message may be displayed:
/sys/fs/cgroup/cpuset/machine.slice/machine-qemu\x2d4\x2dol7guest2.scope/emulator/cpuset.cpus': Permission denied

Verify the issue by comparing the output of the following two files, after running the odacli update-cpucores command:

cat /sys/fs/cgroup/cpuset/cpuset.cpus

cat /sys/fs/cgroup/cpuset/machine.slice/cpuset.cpus

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Sync the file /sys/fs/cgroup/cpuset/machine.slice/cpuset.cpus with /sys/fs/cgroup/cpuset/cpuset.cpus:
cat /sys/fs/cgroup/cpuset/cpuset.cpus > /sys/fs/cgroup/cpuset/machine.slice/cpuset.cpus

This issue is tracked with Oracle bug 31975721.

Parent topic: Known Issues When Managing Oracle Database Appliance

OpenSSH command vulnerability

OpenSSH command vulnerability issue detected in Qualys and Nessus scans.

Qualys and Nessus both report a medium severity issue OPENSSH COMMAND INJECTION VULNERABILITY. Refer to CVE-2020-15778 for details.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

None.

This issue is tracked with Oracle bug 33217970.

Parent topic: Known Issues When Managing Oracle Database Appliance

AHF permissions error

When running the OERR tool in the AHF_HOME on Oracle Database Appliance, an error is encountered.

After successful failover, running the command odacli create-backup on new primary database fails with the following message:
cd /opt/oracle/dcs/oracle.ahf/bin
../oerr
-bash: ./oerr: Permission denied

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Run the tool, with sh, as follows:
cd /opt/oracle/dcs/oracle.ahf/bin
sh oerr
Use AHF XXXX format... Exiting

This issue is tracked with Oracle bug 33293560.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in cleaning up a deployment

When cleaning up a Oracle Database Appliance, an error is encountered.

During cleanup, shutdown of Clusterware fails because the NFS export service uses Oracle ACFS-based clones repository.

Hardware Models

All Oracle Database Appliance hardware models with DB systems

Workaround

Follow these steps:
  1. Stop the NFS service on both nodes:
    service nfs stop
  2. Clean up the bare metal system. See the Oracle Database Appliance Deployment and User's Guide for your hardware model for the steps.

This issue is tracked with Oracle bug 33289742.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in TDE wallet management

When changing the TDE wallet password or rekeying the TDE wallet of a database which has TDE Wallet Management set to the value EXTERNAL, an error is encountered.

The following message is displayed:
DCS-10089:Database DB_NAME is in an invalid state 'NOT_RUNNING'.Database DB_NAME must be running

Hardware Models

All Oracle Database Appliance hardware models

Workaround

NONE. The operations such as changing the TDE wallet password or rekeying the TDE wallet is not supported on a database which has TDE Wallet Management set to the value EXTERNAL.

This issue is tracked with Oracle bug 33278653.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in display of file log path

File log paths are not displayed correctly on the console but all the logs that were generated for a job have actually logged the correct paths.

Hardware Models

All Oracle Database Appliance hardware models with virtualized platform

Workaround

None.

This issue is tracked with Oracle bug 33580574.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in configuring Oracle Data Guard

When running the command odacli configure-dataguard on Oracle Database Appliance, an error may be encountered.

When running the command odacli configure-dataguard on Oracle Database Appliance, the following error message may be displayed at step Restore missing archivelog (Primary site):
DCS-10114:Failed to acquire exclusive access

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. Before running the command odacli configure-dataguard, disable auto-backup schedules for the primary database and verify that the existing backup jobs are completed.
    1. Check the database backup schedule for the primary database:
      odacli list-schedules
    2. Disable the backup schedules for database and archive logs of the primary database:
      odacli update-schedule -i schedule_id -d
  2. Run the command odacli configure-dataguard.
  3. After the command odacli configure-dataguard completes successfully, reenable auto backup for the primary database, if desired.
    odacli update-schedule -i schedule_id -e

This issue is tracked with Oracle bug 33724368.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in configuring Oracle Data Guard on DB System

When running the command odacli configure-dataguard on Oracle Database Appliance, an error is encountered.

When running the command odacli configure-dataguard on an Oracle Database 21c DB system, the following error message is displayed at step Configure and enable Data Guard (Primary site):
ORA-12154: TNS:could not resolve the connect identifier specified

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Remove the tnsnames.ora file in the directory /u01/app/<dbUser>/homes/OraDB21000_home#/network/admin.
mv /u01/app/<dbUser>/homes/OraDB21000_home#/network/admin/tnsnames.ora
/u01/app/<dbUser>/homes/OraDB21000_home#/network/admin/tnsnames.ora.backup

This issue is tracked with Oracle bug 33579891.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in configuring Oracle Data Guard

When configuring Oracle Data Guard on Oracle Database Appliance, an error may be encountered.

After upgrading Oracle ASM standby database from release 12.2 to 19.14, the following error message may be displayed at step Enable log transport:
ORA-46952: STBY DB FORMAT MISMATCH FOR PWD FILE

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Copy the primary password file to the standby system as follows:
  1. On the primary database, run the following:
    ASMCMD> cp +DATA/primaryDbUniqueName/PASSWORD/pwfile /local/path

scp /local/path root@standby:/local/path
  2. On the primary database, run the following:
    ASMCMD>  cp /local/path
+DATA/standbyDbUniqueName/PASSWORD/pwfile


srvctl modify database -db standbyDbUniqueName -pwfile
+DATA/standbyDbUniqueName/PASSWORD/pwfile

This issue is tracked with Oracle bug 33747269.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in reinstating on Oracle Data Guard

When running the command odacli reinstate-dataguard on Oracle Database Appliance, an error is encountered.

The following error message is displayed:
DCS-10001:Internal error encountered: Unable to reinstate Dg.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Manually flashback old primary database.
Run the following commands:
  1. On the new primary machine, get the standby_became_primary_scn:
    SQL> select standby_became_primary_scn from v$database;
STANDBY_BECAME_PRIMARY_SCN
--------------------------
  4370820
  2. On the old primary database, as oracle user, run the following.
    rman target /
RMAN> set decryption identified by 'password'
RMAN> FLASHBACK DATABASE TO SCN STANDBY_BECAME_PRIMARY_SCN;
  3. On the new primary database, run the odacli reinstate-dataguard command.

This issue is tracked with Oracle bug 33190261.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in configuring Oracle Data Guard

After upgrading the standby database from release 12.1 to 19.14, the following error message may be displayed at step Enable redo transport and apply:
Warning: ORA-16629: database reports a different protection level from the protection mode standbydb - Physical standby database (disabled)

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Enable the standby database again by running the following DGMGRL command:
DGMGRL> Enable database tgtptdcnvo
Enabled.

This issue is tracked with Oracle bug 33749492.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in viewing Oracle Data Guard status

When viewing Oracle Data Guard status on Oracle Database Appliance, an error is encountered.

Oracle Data Guard status is not shown on the remote node of Oracle Database Appliance high-availability systems causing Oracle Data Guard switchover, failover, and reinstate jobs to fail at the task Check if DataGuard config is updated. Oracle Data Guard operations, though, are successful.

Hardware Models

All Oracle Database Appliance high-availability systems

Workaround

Use DGMGRL to verify Oracle Data Guard status.

This issue is tracked with Oracle bug 33411769.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in reinstate operation on Oracle Data Guard

When running the command odacli reinstate-dataguard on Oracle Data Guard an error is encountered.

Following are the errors reported in dcs-agent.log:
DCS-10001:Internal error encountered: Unable to reinstate Dg." and can 
further find this error "ORA-12514: TNS:listener does not currently know of  
service requested

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Ensure that the database you are reinstating is started in MOUNT mode.

To start the database in MOUNT mode, run this command: 
srvctl start database -d db-unique-name -o mount

After the command completes successfully, run the command odacli reinstate-dataguard job. If the database is already in MOUNT mode, this can be an temporary error. Check the Data Guard status again a few minutes later with odacli describe-dataguardstatus or odacli list-dataguardstatus, or check with DGMGRL> SHOW CONFIGURATION; to see if the reinstatement is successful.

This issue is tracked with Oracle bug 32367676.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in running concurrent database or database home creation jobs

When running concurrent database or database home creation jobs, an error is encountered.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Do not run concurrent database or database home creation job.

This issue is tracked with Oracle bug 32376885.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in deleting a standby database

When deleting a standby database, an error is encountered.

When you iRestore a database as standby database and then delete it and then again iRestore the same standby database with the same database unique name, the following error is displayed:
DCS-10001:Internal error encountered: Failed to run the asm command: 
[/u01/app/19.0.0.0/grid/bin/asmcmd, --nocp, rm, -rf, RECO/ABCDEU] 
Error:ORA-29261: bad argument 
ORA-06512: at line 4 
ORA-15178: directory 'ABCDEU' is not empty; cannot drop this directory 
ORA-15260: permission denied on ASM disk group 
ORA-06512: at "SYS.X$DBMS_DISKGROUP", line 666 
ORA-06512: at line 2 (DBD ERROR: OCIStmtExecute).

Verify the status of the job with the odacli list-jobs command.

Hardware Models

All Oracle Database Appliance hardware models with Oracle Active Data Guard configuration

Workaround

Run any of the following workarounds:
  • After deleting the standby database and before recreating the same standby database, perform the following steps:
    1. After deleting the standby database and before recreating the same standby database, perform the following steps:
      1. Log in as the oracle user:
        su - oracle
      2. Set the environment:
        . oraenv 
ORACLE_SID = null 
ORACLE_HOME = dbhome_path (such as /u01/app/oracle/product/19.0.0.0/dbhome_1) 
3. cd dbhome_path/bin 
4. asmcmd --privilege sysdba rm -rf +RECO/DBUNIQUENAME/ 
5. asmcmd --privilege sysdba rm -rf +DATA/DBUNIQUENAME/arc10/ 
6. asmcmd --privilege sysdba rm -rf +DATA/DBUNIQUENAME/PASSWORD/
  • Recreate the standby database with a different database unique name.

This issue is tracked with Oracle bug 32871772.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in Oracle Data Guard failover operation for 18.14 database

When running the odacli failover-dataguard command on a database of version 18.14, an error is encountered.

The following error message is displayed:
DCS-10001:Internal error encountered: Unable to precheckFailoverDg11g Dg.
The error message can be viewed in the DCS agent log:
select DATABASE_ROLE, FORCE_LOGGING, FLASHBACK_ON from v$database 
ERROR at line 1: 
ORA-00600: internal error code, arguments: [kcbgtcr_17], [], [], [], [], [], 
[], [], [], [], [], []

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. Run the following DGMGRL statements on the system with the database to fail over to:
    DGMGRL> SHOW CONFIGURATION; 
DGMGRL> VALIDATE DATABASE '<DB_UQNIUE_NAME_to_failover_to>'; 
DGMGRL> FAILOVER TO '<DB_UQNIUE_NAME_to_failover_to>'; 
DGMGRL> SHOW CONFIGURATION;
  2. After failover is successful, run the odacli describe-dataguardstatus -i id command several times to update the DCS metadata.

This issue is tracked with Oracle bug 32727379.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in the enable apply process after upgrading databases

When running the enable apply process after upgrading databases in an Oracle Data Guard deployment, an error is encountered.

The following error message is displayed:
Error: ORA-16664: unable to receive the result from a member

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Follow these steps:
  1. Restart standby database in upgrade mode: 
    srvctl stop database -d <db_unique_name> 
Run PL/SQL command: STARTUP UPGRADE;
  2. Continue the enable apply process and wait for log apply process to refresh.
  3. After some time, check the Data Guard status with the DGMGRL command:
    SHOW CONFIGURATION;

This issue is tracked with Oracle bug 32864100.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in creating Oracle Data Guard status

When configuring Oracle Active Data Guard on Oracle Database Appliance, an error is encountered.

When configuring Oracle Data Guard, the odacli configure-dataguard command fails at step NewDgconfig with the following error on the standby system:
ORA-16665: TIME OUT WAITING FOR THE RESULT FROM A MEMBER

Verify the status of the job with the odacli list-jobs command.

Hardware Models

All Oracle Database Appliance hardware models with Oracle Data Guard configuration

Workaround

Follow these steps:

  1. On the standby system, run the following: 
    export DEMODE=true; 
odacli create-dataguardstatus -i dbid -n dataguardstatus_id_on_primary -r configdg.json 
export DEMODE=false; 
configdg.json example
Example configdg.json file for a single-node system:
{
  "name": "test1_test7",
  "protectionMode": "MAX_PERFORMANCE",
   "replicationGroups": [
    {
      "sourceEndPoints": [
        {
          "endpointType": "PRIMARY",
          "hostName": test_domain1",
          "listenerPort": 1521,
          "databaseUniqueName": "test1",
          "serviceName": "test", 
          "sysPassword": "***", 
          "ipAddress": "test_IPaddress"
        },
         ],
      "targetEndPoints": [
        {
          "endpointType": "STANDBY",
          "hostName": "test_domain2",
          "listenerPort": 1521,
          "databaseUniqueName": "test7",
          "serviceName": "test", 
          "sysPassword": "***", 
          "ipAddress": "test_IPaddress3"
        },
      ],
      "transportType": "ASYNC"
    }
  ]
}

This issue is tracked with Oracle bug 32719173.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in registering a database

When registering a single instance database on Oracle Database Appliance, if the RAC option is specified in the odacli register-database command, an error is encountered.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Create a single-instance database using Oracle Database Configuration Assistance (DBCA) and then register the database using the odacli register-database command with the RAC option.

This issue is tracked with Oracle bug 32853078.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in registering a database

When restoring a database on Oracle Database Appliance, if the NLS setting on the standby database is not America/American, then an error may be encountered.

An error occurs when running the RMAN duplicate task. The RMAN log described in the error message may show RMAN-06136 and ORA-00907 errors.

Hardware Models

All Oracle Database Appliance hardware models

Workaround

None.

This issue is tracked with Oracle bug 32349703.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in Reinstating Oracle Data Guard

When reinstating Oracle Data Guard on Oracle Database Appliance, an error is encountered.

The odacli reinstate-dataguard command fails with the following error:
Unable to reinstate Dg. Reinstate job was executed within 24hrs after failover job.

The dcs-agent.log file has the following error entry:

DGMGRL> Reinstating database "xxxx", 
 please wait... 
Oracle Clusterware is restarting database "xxxx" ... 
Connected to "xxxx" 
Continuing to reinstate database "xxxx" ... 
Error: ORA-16653: failed to reinstate database

Hardware Models

All Oracle Database Appliance hardware models with Oracle Data Guard configuration

Workaround

Follow these steps:

  1. On the primary machine, get the standby_became_primary_scn:
    SQL> select standby_became_primary_scn from v$database; 
STANDBY_BECAME_PRIMARY_SCN 
-------------------------- 
          3522449
  2. On the old primary database, flashback to this SCN with RMAN with the backup encryption password:
    RMAN> set decryption identified by 'rman_backup_password' ; 
executing command: SET decryption 
RMAN> FLASHBACK DATABASE TO SCN 3522449 ; 
... 
Finished flashback at 24-SEP-20 
RMAN> exit
  3. On the new primary machine, run the odacli reinstate-dataguard command.

This issue is tracked with Oracle bug 31884506.

Parent topic: Known Issues When Managing Oracle Database Appliance

Failure in Reinstating Oracle Data Guard

When reinstating Oracle Data Guard on Oracle Database Appliance, an error is encountered.

The odacli reinstate-dataguard command fails with the following error:
Message:   
DCS-10001:Internal error encountered: Unable to reinstate Dg.

The dcs-agent.log file has the following error entry:

ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

Hardware Models

All Oracle Database Appliance hardware models with Oracle Data Guard configuration

Workaround

Follow these steps:

  1. Make sure the database you are reinstating is started in MOUNT mode. To start the database in MOUNT mode, run this command:
    srvctl start database -d db-unique-name -o mount
  2. After the above command runs successfully, run the odacli reinstate-dataguard command.

This issue is tracked with Oracle bug 32047967.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error in updating Role after Oracle Data Guard operations

When performing operations with Oracle Data Guard on Oracle Database Appliance, an error is encountered in updating the Role.

The dbRole component described in the output of the odacli describe-database command is not updated after Oracle Data Guard switchover, failover, and reinstate operations on Oracle Database Appliance.

Hardware Models

All Oracle Database Appliance hardware models with Oracle Data Guard configuration

Workaround

Run odacli update-registry -n db --force/-f to update the database metadata. After the job completes, run the odacli describe-database command and verify that dbRole is updated.

This issue is tracked with Oracle bug 31378202.

Parent topic: Known Issues When Managing Oracle Database Appliance

Error when recovering a single-instance database

When recovering a single-instance database, an error is encountered.

When a single-instance database is running on the remote node, and you run the operation for database recovery on the local node, the following error is observed:
DCS-10001:Internal error encountered: DCS-10001:Internal error encountered: 
Missing arguments : required sqlplus connection  information is not 
provided

Hardware Models

All Oracle Database Appliance hardware models

Workaround

Perform recovery of the single-instance database on the node where the database is running.

This issue is tracked with Oracle bug 31399400.

Parent topic: Known Issues When Managing Oracle Database Appliance

Job history not erased after running cleanup.pl

After running cleanup.pl, job history is not erased.

After running cleanup.pl, when you run /opt/oracle/dcs/bin/odacli list-jobs commands, the list is not empty.

Hardware Models

All Oracle Database Appliance hardware models for bare metal deployments

Workaround

  1. Stop the DCS Agent by running the following commands on both nodes.

    For Oracle Linux 6, run:

    initctl stop initdcsagent

    For Oracle Linux 7, run:

    systemctl stop initdcsagent
  2. Run the cleanup script sequentially on both the nodes.

This issue is tracked with Oracle bug 30529709.

Parent topic: Known Issues When Managing Oracle Database Appliance

Inconsistency in ORAchk summary and details report page

ORAChk report summary on the Browser User Interface may show different counts of Critical, Failed, and Warning issues than the report detail page.

Hardware Models

Oracle Database Appliance hardware models bare metal deployments

Workaround

Ignore counts of Critical, Failed, and Warning issues in the ORAchk report summary on the Browser User Interface. Check the report detail page.

This issue is tracked with Oracle bug 30676674.

Parent topic: Known Issues When Managing Oracle Database Appliance

Missing DATA, RECO, and REDO entries when dbstorage is rediscovered

Running the odacli update-registry command with -n all --force or -n dbstorage --force option can result in metadata corruption.

Hardware Models

All Oracle Database Appliance hardware models bare metal deployments

Workaround

Run the -all option when all the databases created in the system use OAKCLI in migrated systems. On other systems that run on DCS stack, update all components other than dbstorage individually, using the odacli update-registry -n component_name_to_be_updated_excluding_dbstorage.

This issue is tracked with Oracle bug 30274477.

Parent topic: Known Issues When Managing Oracle Database Appliance

The odaeraser tool does not work if oakd is running in non-cluster mode

After cleaning up the deployment, the Secure Eraser tool does not work if oakd is running in non-cluster mode.

Hardware Models

All Oracle Database Appliance Hardware bare metal systems

Workaround

After cleanup of the deployment, oakd is started in the non-cluster mode, and it cannot be stopped using "odaadmcli stop oak" command. In such a case, if the Secure Erase tool is run, then the odaeraser command fails.

Use the command odaadmcli shutdown oak to stop oakd.

This issue is tracked with Oracle bug 28547433.

Parent topic: Known Issues When Managing Oracle Database Appliance

Issues with the Web Console on Microsoft web browsers

Oracle Database Appliance Web Console has issues on Microsoft Edge and Microsoft Internet Explorer web browsers.

Following are issues with Microsoft web browsers:
  • Oracle Database Appliance Web Console does not display correctly on Microsoft Edge and Microsoft Internet Explorer web browsers.
  • Advanced Information for the appliance does not display on Microsoft Internet Explorer web browser.
  • Job activity status does not refresh in the Web Console on Microsoft Internet Explorer web browser.
  • After configuring the oda-admin password, the following error is displayed:
    Failed to change the default user (oda-admin) account password. 
Status Code: 500 DCS-10001: DCS-10001:Internal error encountered: User not authorized

    Workaround: Close the Microsoft Internet Explorer browser session and open another browser session.

Models

All Oracle Database Appliance Hardware Models bare metal deployments

Workaround

To access the Web Console, use either Google Chrome or Firefox.

This issue is tracked with Oracle bugs 30077007, 30099089, and 29887027.

Parent topic: Known Issues When Managing Oracle Database Appliance

Unrecognized Token Messages Appear in /var/log/messages

After updating Oracle Database Appliance, unrecognized token messages appear in /var/log/messages.

Updating to Oracle Database Appliance 12.1.2.11.0 updates the Oracle VM Server version to 3.4.3. After updating, the following messages appear in /var/log/messages: 

Unrecognized token: "max_seq_redisc"
Unrecognized token: "rereg_on_guid_migr"
Unrecognized token: "aguid_inout_notice"
Unrecognized token: "sm_assign_guid_func"
Unrecognized token: "reports"
Unrecognized token: "per_module_logging"
Unrecognized token: "consolidate_ipv4_mask"

You can ignore the messages for these parameters, they do not impact the InfiniBand compliant Subnet Manager and Administration (opensm) functionality. However, Oracle recommends removing the parameters to avoid flooding /var/log/messages.

Hardware Models

Oracle Database Appliance X6-2-HA and X5-2 with InfiniBand

Workaround

Perform the following to remove the parameters:

  1. After patching, update the /etc/opensm/opensm.conf file in bare metal deployments and in Dom0 in virtualized platform environment to remove the parameters. 

    cat /etc/opensm/opensm.conf  | egrep -w
'max_seq_redisc|rereg_on_guid_migr|aguid_inout_notice|sm_assign_guid_func|repo
rts|per_module_logging|consolidate_ipv4_mask' | grep -v ^#
max_seq_redisc 0
rereg_on_guid_migr FALSE
aguid_inout_notice FALSE
sm_assign_guid_func uniq_count
reports 2
per_module_logging FALSE
consolidate_ipv4_mask 0xFFFFFFFF

  2. Reboot. The messages will not appear after rebooting the node.

This issue is tracked with Oracle bug 25985258.

Parent topic: Known Issues When Managing Oracle Database Appliance