Unpack the Oracle Private Cloud Appliance
The unpacking location should be determined during the site planning process.
Tools Required for Installation
The following tools and equipment are required for installation and service:
-
Unpacking tools (provided in rack ship kit)
-
17mm and 13mm open-ended double-sided wrench
-
Allen L-key 6mm hex wrench, 5-3/4 inches in length
-
Allen L-key 8mm hex wrench, 6-3/8 inches in length
-
-
Rack setup tools and accessories (provided in rack ship kit)
-
32 M6 cage nuts and washers
-
32 M6 pan head screws
-
8 M5 screws
-
8 self-tapping Torx screws
-
4 PDU brackets
-
4 M5 cage nuts
-
4 grounded power cables
-
18mm and 16mm open-ended double-sided wrench
-
T-40 Torx screwdriver
-
T-25 Torx screwdriver
-
T-15 Torx screwdriver
-
8mm and 6mm Allen wrench
-
Cage nut tool
-
Keys to the front door, rear door, and side panel locks
-
17mm and 13mm open-ended double-sided wrench
-
-
Customer-supplied tools (not provided in rack ship kit)
-
No. 2 Phillips screwdriver
-
Diagonal cutter
-
Antistatic wrist strap
-
Unpack the System
Before unpacking the rack from the shipping carton, refer to the labels on the carton and to the instructions that they provide. After unpacking the rack, follow local laws and guidelines to recycle the packaging properly.
Caution:
Carefully unpack the rack from the packaging and shipping pallet. Rocking or tilting the rack can cause it to fall over and cause serious injury or death. You should always use professional movers when unpacking and installing this rack.
Note:
After unpacking the rack from the packaging, save the shipping brackets used to secure the rack to the shipping pallet. You can use these shipping brackets to secure the rack permanently to the installation site floor. Do not dispose of these brackets, because you cannot order replacement brackets.
Caution:
Shipping brackets are not for use for bracing or anchoring the rack during seismic events.
Figure 4-1 Unpack the Oracle Private Cloud Appliance From the Packaging
