Installing the Chassis Ears and Slides

In this second portion of system installation, two chassis ears and two chassis slides are secured to the Acme Packet 6300/6350.

To install the chassis slide rails on the Acme Packet 6300/6350:

1. Locate the following components:

   • 6 x 10-32 x 5/16” flat head (black) screws

   • 2 x front mounting ears (left and right)

   • 6 x 6-32 x 5/16” screws

   • 2 x chassis slides

2. Line up one chassis ear with the tapped holes as shown in the following image. Position the chassis ear’s spring-loaded thumbscrew toward the front panel of the system.
   

   Chassis Ear Mount Points

3. Use 3 x 10-32 x 5/16” Flat head screws to secure the chassis ear to the chassis. Final installation resembles the image below.

   Chassis Ear Installed

4. Line up the chassis slide with the Acme Packet 6300/6350 side panel. Position the slide’s large marker hole at the front of the Acme Packet 6300/6350 chassis. The remaining three tapped holes will line up with the slide’s holes. The following image points out the tapped holes.
   

   Chassis Slide Rail Mount Points

5. Use 3 x 6-32 x 5/16” screws to secure the chassis slide rail to the chassis. Notice that the large hole in the slide rail is positioned toward the front of the Acme Packet 6300/6350.
   

   Chassis Slide Rail Installed

6. Repeat steps 2-5 for the other side of the Acme Packet 6300/6350.