Installing the Chassis in the Rack

The Acme Packet 6300/6350 is now ready to be installed into the center mount rack. To prevent personal injury or damage to the chassis, please follow these guidelines:

• This installation requires two people and should not be attempted otherwise.
• Follow your organization’s best practices for lifting and installing heavy components into an equipment rack.
• Ensure that the Acme Packet 6300/6350 remains supported until you have completely installed it into the equipment rack.

1. Locate the following components:

   • 4 x equipment rack screws

   Note:

   You may use the #10-32 x 5/8 screws included with the Acme Packet 6300/6350 or you may use your own.
2. Lift the Acme Packet 6300/6350 into the correct position in the equipment rack.
3. Screw the mounting ears on the Acme Packet 6300/6350 into the equipment rack using four rack screws. One person should hold the Acme Packet 6300/6350 in the correct position, and another person should screw the Acme Packet 6300/6350 in place.

   

   Center-Mounted Acme Packet 6300/6350