What's New in This Guide
This section introduces the documentation updates for release 25.1.2xx.
Release 25.1.200 - G25511-02, August 2025
Updated Support of Traffic Detection on SMF-N7 and TDF using Sd Interface section with a note that Custom support for traffic detection on SMF-N7 and TDF using the Sd interface is an experimental feature. It is subject to change and is not supported for production use (lab use only).
Release 25.1.200 - G25511-01, July 2025
- Feature Updates:
- New Features:
-
Support for NR vs EUTRA KPIs for N7 Interface
- Updated the following metrics in SM Service Metrics, with two new dimensions namely
ratType
andaccessType
:ocpm_ingress_request_total
ocpm_ingress_response_total
http_in_conn_request_total
http_in_conn_response_total
- Added the following metrics to SM Service Metrics section:
http_in_conn_ext_request_total
http_in_conn_ext_response_total
- Added the following dimensions to CNC Policy Metrics section:
accessType
policyControlRequestTrigger
ratType
sourceAccessType
sourceRatType
- Updated the following metrics in SM Service Metrics, with two new dimensions namely
-
Supports Traffic Detection on SMF-N7 and TDF using Sd Interface
- Added the Support of Traffic Detection on SMF-N7 and TDF using Sd Interface section to support traffic detection on SMF-N7 and TDF-Sd interface.
- Updated the Session Viewer section with session type
SM TDF Session
. - Added following fields in PCF Session Management page in CNC Console to support auditing of TDF
stale sessions:
- Enabled
- Query TDF
- Notification Rate (per second)
- TDF Session Age (in minutes)
- TDF Session Maximum Age (in minutes)
- Minimum Audit Attempts
- Minimum Audit Passes Interval (in minutes)
- Added the following page under Traffic Profile menu in CNC Console to create traffic profile with ADC rule for PCF SM:
- Added the following advanced setting keys to PCF Session Management to support Congestion Control for
TDF requests:
SM.TDF.SESSION.DELETE.PRIORITY
SM.TDF.SESSION.UPDATE.PRIORITY
- Added the following advanced setting keys to Diameter Connector to
support Congestion Control for TDF requests:
SM.TDF.CREATE.SESSION.REQUEST.PRIORITY
SM.TDF.TERMINATE.REQUEST.PRIORITY
SM.TDF.UPDATE.REQUEST.PRIORITY
-
Support Reattempt after Backoff during N1N2 Communication
- Added the Supports Reattempt after Back-off during N1N2 Communication section to support reattempt and backoff during N1N2 Communication in UE.
- Updated the Interface Type
drop-down field to list
AMF
andNRF
values in Reattempts Profile page in CNC Console. - Updated the BSF Reattempt Settings field name to Re-attempt Settings in Reattempts Profile page in CNC Console.
- Added the following fields in Reattempts Profile page in CNC Console to support reattempts for AMF
and NRF interfaces:
- Re-attempt Error Code Settings
- Rate Limiting Settings
- Added the Re-attempt Settings field in NF Communication Profiles
- Added the following advanced setting keys to PCF UE Policy Service section.
CONCURRENCY.N15.REATTEMPT_TIMER_EXPIRY.LOCK_REQUEST_RETRY_COUNT
CONCURRENCY.N15.REATTEMPT_TIMER_EXPIRY.LOCK_REQUEST_RETRY_BACKOFF
CONCURRENCY.N15.REATTEMPT_TIMER_EXPIRY.LOCK_LEASE_DURATION
CONCURRENCY.N15.REATTEMPT_TIMER_EXPIRY.LOCK_WAIT_DURATION
CONCURRENCY.N15.REATTEMPT_TIMER_EXPIRY.ENABLED
AMF.OPTIMIZED.DISCOVERY.AND.SUBS.ENABLED
- Added new Timer Service menu to Policy Service Configurations in CNC Console to provide timer related configurations.
- Added the following advanced setting keys to Timer Service section.
TIMER_EXP_RANGE_MIN_SEC
TIMER_EXP_RANGE_MAX_SEC
TIMER_NOTIFICATION_RETRY_MAX_COUNT
TIMER_STALE_INTERVAL_SEC
TIMER_STUCK_INTERVAL_SEC
TIMER_NOTIFY_ON_STUCK
TIMER_SCAN_HEART_BEAT_ACTIVITY_FREQUENCY
TIMER_SCAN_ORPHAN_LOCAL_ACTIVITY_FREQUENCY
TIMER_SCAN_ORPHAN_REMOTE_ACTIVITY_FREQUENCY
TIMER_SCAN_CLEAN_UP_ACTIVITY_FREQUENCY
MISSED_HB_CYCLES_TO_CONSIDER_POD_DEAD
MISSED_HB_CYCLES_TO_CONSIDER_SITE_DEAD
MAX_NUM_OF_DAYS_TO_KEEP_DEAD_POD_RECORD_KEY
- Added new Policy Mated Region menu to General Configurations in CNC Console to add policy mated region configurations.
- Added new Site Fallback menu to General Configurations in CNC Console to configure fallback site.
- Added details of following metrics to UE Service Metrics section to provide reattempt after
backoff details:
occnp_ue_timer_registration_total
occnp_ue_timer_create_success_total
occnp_ue_timer_create_failure_total
occnp_ue_timer_delete_success_total
occnp_ue_timer_delete_failure_total
occnp_ue_nf_discovery_reattempt_request_total
occnp_ue_nf_discovery_reattempt_response_total
ue_n1_policy_backed_off_collation_total
- Added details of following metrics to Audit Service Metrics section to provide audit information for Timer
service:
occnp_timer_count_total
occnp_timer_capacity
occnp_timer_scan_total
occnp_timer_registration_total
occnp_timer_create_failure_total
occnp_timer_notify_retry_total
occnp_timer_state
- Added details of the following alerts:
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_TRANSFER_FAILURE_NOTIFICATION_ABOVE_CRITICAL_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_TRANSFER_FAILURE_NOTIFICATION_ABOVE_MAJOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_TRANSFER_FAILURE_NOTIFICATION_ABOVE_CRITICAL_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_AMF_DISCOVERY_ABOVE_MINOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_AMF_DISCOVERY_ABOVE_MAJOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_AMF_DISCOVERY_ABOVE_CRITICAL_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_SUBSCRIBE_ABOVE_MINOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_SUBSCRIBE_ABOVE_MAJOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_SUBSCRIBE_ABOVE_CRITICAL_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_TRANSFER_ABOVE_MINOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_TRANSFER_ABOVE_MAJOR_THRESHOLD
- AUDIT_TIMER_CAPACITY_FOR_UE_N1N2_TRANSFER_ABOVE_CRITICAL_THRESHOLD
- UE_N1N2_SUBSCRIBE_REATTEMPT_FAILURE_ABOVE_CRITICAL_THRESHOLD
- UE_N1N2_SUBSCRIBE_REATTEMPT_FAILURE_ABOVE_MAJOR_THRESHOLD
- UE_N1N2_SUBSCRIBE_REATTEMPT_FAILURE_ABOVE_MINOR_THRESHOLD
- UE_N1N2_TRANSFER_REATTEMPT_FAILURE_ABOVE_CRITICAL_THRESHOLD
- UE_N1N2_TRANSFER_REATTEMPT_FAILURE_ABOVE_MAJOR_THRESHOLD
- UE_N1N2_TRANSFER_REATTEMPT_FAILURE_ABOVE_MINOR_THRESHOLD
- UE_AMF_DISCOVERY_REATTEMPT_FAILURE_ABOVE_CRITICAL_THRESHOLD
- UE_AMF_DISCOVERY_REATTEMPT_FAILURE_ABOVE_MAJOR_THRESHOLD
- UE_AMF_DISCOVERY_REATTEMPT_FAILURE_ABOVE_MINOR_THRESHOLD
- UE_N1N2_TRANSFER_FAILURE_NOTIFICATION_REATTEMPT_FAILURE_ABOVE_MINOR_THRESHOLD
- UE_N1N2_TRANSFER_FAILURE_NOTIFICATION_REATTEMPT_FAILURE_ABOVE_MAJOR_THRESHOLD
- UE_N1N2_TRANSFER_FAILURE_NOTIFICATION_REATTEMPT_FAILURE_ABOVE_CRITICAL_THRESHOLD
-
AM Service Pod Congestion Control
- Added the AM Service Pod Congestion Control section to describe the pod congestion control mechanism supported in AM service.
- Added details of the following advanced settings
keys and their values in PCF Access and Mobility section:
AM_GET_SUBSCRIBER_SESSIONS_REQUEST_PRIORITY
AM_CREATE_REQUEST_PRIORITY
AM_UPDATE_REQUEST_PRIORITY
AM_NOTIFICATION_REQUEST_PRIORITY
AM_UPDATE_PDSLOCATIONINFO_REQUEST_PRIORITY
AM_DELETE_REQUEST_PRIORITY
AM_AUDIT_NOTIFY_REQUEST_PRIORITY
CONGESTION_RESPONSE_CODE
-
Notifier Service Pod Congestion Control
- Added the Notifier Service Pod Congestion Control section to describe the pod congestion control mechanism supported in Notifier service.
- Added the following advanced setting keys to Notifier Configurations section.
NOTIFIER.NOTIFY.PRIORITY
CONGESTION_RESPONSE_CODE
-
Congestion Control Resource Usage Calculation Using EMA Algorithm
- Added the Congestion Control Resource Usage Calculation Using EMA Algorithm section to describe the algorithm used for resource usage calculation in Congestion Control mechanism.
- Added the details of the following
advanced settings keys in Congestion Control Settings section:
CPU_CONGESTION_RESOURCE_CALC_ALGORITHM
CPU_CONGESTION_RESOURCE_CALC_INTERVAL_MS
QUEUE_CONGESTION_RESOURCE_CALC_ALGORITHM
QUEUE_CONGESTION_RESOURCE_CALC_INTERVAL_MS
EMA_CPU_CONGESTION_RESOURCE_CALC_RATIO
EMA_QUEUE_CONGESTION_RESOURCE_CALC_RATIO
-
Diameter Connector Pod Congestion Control
- Added the Diameter Connector Pod Congestion Control section to describe the pod congestion control mechanism supported in Diameter Connector service.
- Updated the Congestion Control menu in CNC Console with Diameter Connector congestion control configurations.
- Added details of the following advanced settings
keys:
SM_NOTIFY_REQUEST_PRIORITY
SM_NOTIFY_TERMINATE_REQUEST_PRIORITY
PDS_FETCH_REQUEST_PRIORITY
PDS_NOTIFY_TERMINATE_REQUEST_PRIORITY
RX_AAR_REQUEST_PRIORITY
RX_STR_REQUEST_PRIORITY
RX_ASR_REQUEST_PRIORITY
SY_SNR_DEFAULT_PRIORITY
-
User Service Pod Congestion Control
- Added the User Service Pod Congestion Control section to describe the pod congestion control mechanism supported by UDR and CHF Connectors in User service.
- Updated the Congestion Control menu in CNC Console with UDR and CHF Connector congestion control configurations.
- Added details of the following advanced
settings keys in PCF User Connector section:
UDR_GET_USER_DATA_REQUEST_PRIORITY
UDR_DELETE_USER_DATA_REQUEST_PRIORITY
UDR_PATCH_USER_DATA_REQUEST_PRIORITY
UDR_SUBS_TO_NOTIFY_REQUEST_PRIORITY
UDR_NOTIFY_REQUEST_PRIORITY
UDR_UM_NOTIFY_REQUEST_PRIORITY
CHF_GET_SPENDING_LIMIT_REQUEST_PRIORITY
CHF_DELETE_SPENDING_LIMIT_REQUEST_PRIORITY
CHF_TERMINATE_NOTIFY_REQUEST_PRIORITY
CHF_NOTIFY_REQUEST_PRIORITY
UDR_ADD_3GPP_SBI_MSG_PRIORITY
CHF_ADD_3GPP_SBI_MSG_PRIORITY
UDR_CONGESTION_RESPONSE_CODE
CHF_CONGESTION_RESPONSE_CODE
-
PCF support to not send ASR while Notify-Update fails
- Added PCF support to not send ASR while Notify-Update fails section to describe PCF support to not send ASR while Notify-Update fails.
- Added Rx Reauth Profiles section in the CNC Console to configure RX reauth profiles.
- Updated PCF Session Management section with the
following fields:
- Rx ReAuth Profile for Create
- Rx ReAuth Profile for Update
The following alerts are added for this feature:- UPDATE_NOTIFY_FAILURE_ABOVE_30_PERCENT
- UPDATE_NOTIFY_FAILURE_ABOVE_50_PERCENT
- UPDATE_NOTIFY_FAILURE_ABOVE_70_PERCENT
- Added the occnp_suppress_notify_total metric to SM Service Metrics.
-
Handling of Multiple N1N2Transfer Messages
Added/updated the following section to include the details of handling of multiple N1N2Transfer messages feature:- Added Handling of Multiple N1N2Transfer Messages section to describe the handling of multiple N1N2Transfer messages.
- Added the following CNC Console
configuration fields to PCF UE Policy Service:
- Enable Consolidation of UE Policy Decisions
- Enable Consolidation of UE Policy Decisions for Re-transmission on T3501 Expiration
- Added UE.POLICY.INSTALLATION.OPTIMIZATION.ENABLED advanced setting key for UE service to PCF UE Policy Service.
- Added details of the following metrics
to UE Service Metrics:
- ue_n1_policy_sequencing
- ue_n1_policy_consolidation
- ue_n1_transfer_t3501_expiry_total
- Updated UE Policy Enhancements with details of support of policy evaluation on T3501 Timer Expiry.
- Added the following advanced setting
keys for UE service to PCF UE Policy Service:
CONCURRENCY.N15.UE_NOTIFICATION.LOCK_REQUEST_RETRY_COUNT
CONCURRENCY.N15.UE_NOTIFICATION.LOCK_REQUEST_RETRY_BACKOFF
CONCURRENCY.N15.UE_NOTIFICATION.LOCK_LEASE_DURATION
CONCURRENCY.N15.UE_NOTIFICATION.LOCK_WAIT_DURATION
CONCURRENCY.N15.UE_NOTIFICATION.ENABLED
- Added the following alerts to Common Alerts:
- UE_N1N2_NOTIFY_REJECTION_RATE_ABOVE_MINOR_THRESHOLD
- UE_N1N2_NOTIFY_REJECTION_RATE_ABOVE_MAJOR_THRESHOLD
- UE_N1N2_NOTIFY_REJECTION_RATE_ABOVE_CRITICAL_THRESHOLD
- UE_N1N2_TRANSFER_FAILURE_RATE_ABOVE_MINOR_THRESHOLD
- UE_N1N2_TRANSFER_FAILURE_RATE_ABOVE_MAJOR_THRESHOLD
- UE_N1N2_TRANSFER_FAILURE_RATE_ABOVE_CRITICAL_THRESHOLD
- UE_N1N2_TRANSFER_T3501_TIMER_EXPIRY_RATE_ABOVE_MINOR_THRESHOLD
- UE_N1N2_TRANSFER_T3501_TIMER_EXPIRY_RATE_ABOVE_MAJOR_THRESHOLD
- UE_N1N2_TRANSFER_T3501_TIMER_EXPIRY_RATE_ABOVE_CRITICAL_THRESHOLD
- Support for Dual Stack
- Added the Support for Dual Stack section to describe the support for IPV4 and IPv6 dual stack.
- LDAP Timeout and Retry Mechanism
- Added the LDAP Timeout and Retry Mechanism section to describe LDAP timeout and retry mechanism.
- Added the following CNC Console
configuration fields to Data Sources:
- Retry Enabled
- Max number of retries
- Retries on errors/timeout
- Added details of the following metrics
to LDAP Gateway:
- occnp_ldap_search_request_total
- occnp_ldap_search_response_total
- Support for Stale Requests Cleanup for
Binding Service
- Described the stale request cleanup for Binding service in Support for Stale Requests Cleanup.
- Added the following Advanced Settings
keys for Binding service to Binding Service:
ENABLE_LATE_ARRIVAL
ENABLE_LATE_PROCESSING
- Added
DIAMETER.Timer.Enabled
Advanced Settings key to Settings. - Added the following metrics used for
handling stale requests cleanup functionality for
Binding service to Binding Service Metrics:
- occnp_late_arrival_rejection_total
- occnp_late_processing_rejection_total
- Added the following alerts to Common Alerts:
- STALE_BINDING_REQUEST_REJECTION_CRITICAL
- STALE_BINDING_REQUEST_REJECTION_MAJOR
- STALE_BINDING_REQUEST_REJECTION_MINOR
- Support for Stale Requests Cleanup for
Diameter Connector
- Described the stale request cleanup for Diameter Connector in Support for Stale Requests Cleanup.
- Added the following fields for Diameter
Connector configuration to Diameter Connector:
Enable Late Arrival
Enable Late Processing
Skip Late Processing For Terminate
SBI Timer Enabled
- Added the
occnp_tale_diam_request_cleanup_total
metric used for handling stale requests cleanup functionality for Diameter Connector to Diameter Connector Service Metrics. - Added the following alerts to Common Alerts:
- STALE_DIAMETER_CONNECTOR_REQUEST_CLEANUP_MINOR
- STALE_DIAMETER_CONNECTOR_REQUEST_CLEANUP_MAJOR
- STALE_DIAMETER_CONNECTOR_REQUEST_CLEANUP_CRITICAL
- Support for Stale Requests Cleanup for User
Connector to CHF and UDR
- Described the stale request cleanup for User Connector to CHF and UDR in Support for Stale Requests Cleanup.
- Added the following Advanced Settings
keys for User Connector configuration to PCF User Connector:
UDR.enable.late.arrival
CHF.enable.late.arrival
UDR.enable.late.processing
CHF.enable.late.processing
UDR.skip.late.processing.for.terminate
CHF.skip.late.processing.for.terminate
- Added the following metrics used for
handling stale requests cleanup functionality for
User Connector to User Service Metrics:
- occnp_late_arrival_rejection_total
- occnp_late_processing_rejection_total
- Added the following alerts to Common Alerts:
- UDR_C_STALE_HTTP_REQUEST_CLEANUP_MINOR
- UDR_C_STALE_HTTP_REQUEST_CLEANUP_MAJOR
- UDR_C_STALE_HTTP_REQUEST_CLEANUP_CRITICAL
- CHF_C_STALE_HTTP_REQUEST_CLEANUP_MINOR
- CHF_C_STALE_HTTP_REQUEST_CLEANUP_MAJOR
- CHF_C_STALE_HTTP_REQUEST_CLEANUP_CRITICAL
-
Stale Binding Detection Audit, Report and Recover
- Added Stale Binding Detection Audit, Report and Recover to describe the detection and handling of stale binding records of PDU sessions.
- Added the following configuration
parameters and advanced settings key to Binding Service:
- Revalidate with BSF
- BSF Retry Profile For Revalidation Messages
- SESSION_BINDING_REVALIDATION_MESSAGE_PRIORITY (advanced settings key)
- Added the following metrics to Binding Service Metrics to support Stale Binding Detection
Audit, Report and Recover:
- occnp_session_binding_revalidation_request_total
- occnp_session_binding_revalidation_response_total
- ocpm_egress_response_total
- Added the following alerts to Common Alerts:
- SESSION_BINDING_MISSING_FROM_BSF_EXCEEDS_CRITICAL_THRESHOLD
- SESSION_BINDING_MISSING_FROM_BSF_EXCEEDS_MAJOR_THRESHOLD
- SESSION_BINDING_MISSING_FROM_BSF_EXCEEDS_MINOR_THRESHOLD
- SESSION_BINDING_REVALIDATION_WITH_BSF_FAILURE_EXCEEDS_CRITICAL_THRESHOLD
- SESSION_BINDING_REVALIDATION_WITH_BSF_FAILURE_EXCEEDS_MAJOR_THRESHOLD
- SESSION_BINDING_REVALIDATION_WITH_BSF_FAILURE_EXCEEDS_MINOR_THRESHOLD
- Support for Stale Requests Cleanup for UE
Policy Service
- Described the stale request cleanup for UE Policy service in Support for Stale Requests Cleanup.
- Added the following Advanced Settings
keys for UE Policy service to PCF UE Policy Service:
ENABLE_LATE_ARRIVAL
ENABLE_LATE_PROCESSING
SKIP_LATE_PROCESSING_FOR_TERMINATE
-
Added ocpm_late_arrival_rejection_total and occnp_late_processing_rejection_total metrics used for handling stale requests cleanup functionality for UE Policy service to UE Service Metrics.
- Added the following alerts to Common Alerts:
- UE_STALE_REQUEST_PROCESSING_REJECT_MINOR
- UE_STALE_REQUEST_PROCESSING_REJECT_MAJOR
- UE_STALE_REQUEST_PROCESSING_REJECT_CRITICAL
- UE_STALE_REQUEST_ARRIVAL_REJECT_MINOR
- UE_STALE_REQUEST_ARRIVAL_REJECT_MAJOR
- UE_STALE_REQUEST_ARRIVAL_REJECT_CRITICAL
- Handling Collision Between AAR and STR Messages During
Update Notify Timeout
- Added Handling Collision Between AAR and STR Messages During Update Notify Timeout to describe how PCF handles collision between AAR-I/AAR-U and STR messages during update notify timeout.
- Added the following Advanced Settings keys to PCF Session Management:
SYSTEM.RX.UPDATE_NOTIFY.RULES.PENDING_CONFIRMATION.ENABLED
SYSTEM.RX.UPDATE_NOTIFY.RULES.PENDING_CONFIRMATION.PROCESS_ON_UPDATE
SYSTEM.RX.UPDATE_NOTIFY.RULES.PENDING_CONFIRMATION.RESPONSE_CODES
SYSTEM.RX.UPDATE_NOTIFY.RULES.PENDING_CONFIRMATION.EXCEPTIONS
- Added the following metrics to SM Service Metrics:
ocpm_handle_update_notify_timeout_as_pending_confirmation_total
ocpm_handle_update_notify_error_response_as_pending_confirmation_total
ocpm_process_pending_confirmation_rules_on_pa_update_total
ocpm_process_pending_configuration_rules_on_pa_delete_total
ocpm_rx_update_notify_request_total
- Added the following alerts to PCF Alerts:
- RX_PENDING_CONFIRMATION_UPDATE_NOTIFY_ERROR_RESPONSE_ABOVE_CRITICAL_THRESHOLD
- RX_PENDING_CONFIRMATION_UPDATE_NOTIFY_ERROR_RESPONSE_ABOVE_MAJOR_THRESHOLD
- RX_PENDING_CONFIRMATION_UPDATE_NOTIFY_ERROR_RESPONSE_ABOVE_MINOR_THRESHOLD
- RX_PENDING_CONFIRMATION_UPDATE_NOTIFY_TIMEOUT_ABOVE_CRITICAL_THRESHOLD
- RX_PENDING_CONFIRMATION_UPDATE_NOTIFY_TIMEOUT_ABOVE_MAJOR_THRESHOLD
- RX_PENDING_CONFIRMATION_UPDATE_NOTIFY_TIMEOUT_ABOVE_MINOR_THRESHOLD
-
Single UE ID Implementation
- Added Optimizing PolicyDS Database Query With Configurable UE IDs to describe query on PolicyDS database based on UEIds.
- Added PDS UE ID Configuration to describe the PolicyDS database query configuration based on UE IDs.
- Updated occnp_db_processing_latency_seconds_count metric in Policy DS Metrics.
- Custom Query
- Added Support for Monitoring Migration Status of Database Records to describe configuring query on Policy databases used by Policy Microservices.
- Added Custom Query to describe viewing the migration of PolicyDS database migration details.
- Handling cnDBTier Cluster Disconnection
- Added details of PCF Cluster DB State to Support for cnDBTier APIs in CNC Console describing the support for displaying realtime status of the cluster state and NF database functional state in the cnDBTier database cluster.
- Added the following metrics to AppInfo Metrics to support handling cnDBTier cluster
disconnection:
- appinfo_dbmonitor_request_total
- appinfo_dbmonitorclusterDbState_current
- appinfo_nfDbFunctionalState_change_total
- appinfo_nfDbFunctionalState_current
- appinfo_http_response_total
- Added the PCF_STATE_NON_FUNCTIONAL_CRITICAL alert to PCF Alerts.
-
- Enhancements:
-
PDS Performance Improvement
- Updated the advanced settings key
PRIMARYKEY_LOOKUP_ENABLED
in PDS Settings section to support PDS to send pds-location-information to SM service. - Added the advanced settings key
SM.PDS.LOCATION.INFO.NOTIFY.PRIORITY
in PCF Session Management section to configure the discard priority for Congestion Control. - Added
occnp_pds_location_info_notification_total
metric details to SM Service Metrics section.
- Updated the advanced settings key
- Updated the Logging Support for Error Response section with details of enhanced logging for error responses during SM call flows.
-
Diameter Gateway Pod Congestion Control
- Updated the Diameter Pod Congestion Control feature to make its Congestion Control mechanism to be same as other common Policy services.
- Updated the Congestion Control Settings section menu in CNC Console with Diameter Gateway congestion control configurations.
- Updated the Thresholds menu in CNC Console with Diameter Gateway congestion control resource threshold configurations.
- Updated the Load Shedding Rules menu in CNC Console with Diameter Gateway congestion control discard priorities configurations.
- Added the details of the following
advanced settings keys in Diameter Configuration
Settings section:
CONGESTION_DIAMETER_RESPONSE_CODE
CONGESTION_DIAMETER_VENDOR_ID
- Added the details of the following
fields in Diameter Message Priority Profiles menu in CNC Console.
DRMP
OC-Message-Priority
- Added the
occnp_diam_pending_requests_total
metrics for tracking pod congestion information in Diameter Gateway Metrics: - Added the following metrics for
tracking pod congestion information in Pod Congestion Metrics:
occnp_congestion_diam_pending_request_active_counter
occnp_congestion_diam_pending_request_end_to_end_id_map_size
occnp_congestion_DiamMsgBuffer_queue_msg_count
-
Integrating Policy with Different Network Functions
- Updated the Integrating Policy with Different Network Functions section with details to configure
capacity
parameter for PCF regsitration profile.
- Updated the Integrating Policy with Different Network Functions section with details to configure
- Added the following advanced setting keys for UE
service to PCF UE Policy Service:
CONCURRENCY.N15.T3501_TIMER_EXPIRY.LOCK_REQUEST_RETRY_COUNT
CONCURRENCY.N15.T3501_TIMER_EXPIRY.LOCK_LEASE_DURATION
CONCURRENCY.N15.T3501_TIMER_EXPIRY.LOCK_WAIT_DURATION
CONCURRENCY.N15.T3501_TIMER_EXPIRY.ENABLED
-
-
Add Reduced Capability UEs feature enhancements to SM-Rx flow
- Updated Support for Handling Requests From Reduced Capability Devices with details on support for NR_REDCAP value for RAT Type over Rx interface.
- Added Redcap Support for Rx Interface field to Diameter Connector, which is used to configure support for NR_REDCAP value for RAT Type over Rx interface.
- Added diam_avp_dropped metric to Diameter Connector Service Metrics, which is used to support for NR_REDCAP value for RAT Type over Rx interface.
- Signaling and DB Access Processing Latency Histogram Metrics for
Binding Service
- Added Support for Signaling and DB Access Processing Latency Histogram Metrics to describe support for Signaling and DB Access Processing Latency Histogram Metrics for Policy microservices.
- Added the following Advanced Settings keys to Binding Service, which are used to enable and configure histrogram
metrics for Binding service database:
- ENABLE_BINDING_DB_HISTOGRAM_METRICS
- ENABLE_BINDING_HTTP_HISTOGRAM_METRICS
- Added the following metrics to Binding Service Metrics:
- occnp_db_processing_latency_seconds
- occnp_http_in_conn_processing_latency_seconds
- occnp_http_out_conn_processing_latency_seconds
- Ingress Gateway Pod Protection by Rate Limiting
- Updated Pod Protection at Ingress Gateway section with details of pod protection by rate limiting at Ingress Gateway service.
- Added POD_PROTECTION_BY_RATELIMIT_REJECTED_REQUEST alert that is used for pod protection by rate limiting at Ingress Gateway service.
- Handling DB cluster disconnect
- Updated Support for cnDBTier APIs in CNC Console to add details of PCF Cluster DB State to view the database cluster state information.
- Added PCF Cluster DB State to describe viewing the database cluster state information in CNC Console for Policy.
- Added
PCF_STATE_NON_FUNCTIONAL_CRITICAL
alerts to PCF Alerts. - Added the following metrics to AppInfo Metrics:
- appinfo_dbmonitor_request_total
- appinfo_dbmonitorclusterDbState_current
- appinfo_nfDbFunctionalState_change_total
- appinfo_nfDbFunctionalState_current
- appinfo_http_response_total
- New Features:
- General Updates:
- Added the following metrics for monitoring the workflow
task information in Policy DS Metrics:
task_count_total
task_processing_latency_sum_total
- Added the following metrics for monitoring the workflow
task information in Policy DS Metrics:
- Added the following Advanced settings keys to PCF Session Management section:
SYSTEM.ENABLE_CLEANUP_DELAY_AFTER_FAILED_REQUEST
SYSTEM.CLEANUP_DELAY_AFTER_FAILED_REQUEST
- Added the following Advanced Concurrency keys to PCF Access and Mobility and PCF UE Policy Service sections:
CONCURRENCY.N15.CLEANUP.ENABLED
CONCURRENCY.N15.CLEANUP.LOCK_REQUEST_RETRY_COUNT
CONCURRENCY.N15.CLEANUP.LOCK_REQUEST_RETRY_BACKOFF
CONCURRENCY.N15.CLEANUP.LOCK_LEASE_DURATION
CONCURRENCY.N15.CLEANUP.LOCK_WAIT_DURATION
CONCURRENCY.N15.CLEANUP.ALLOW_ON_SERVICE_FAILURE
- Added the following Advanced Timer guard keys to PCF Access and Mobility and PCF UE Policy Service sections.
AMF_CONNECTOR_TIMEOUT_GUARD
PDS_CONNECTOR_TIMEOUT_GUARD
- Added the following Advanced Timer guard keys to PCF Session Management section.
SYSTEM.SMF_CONNECTOR_TIMEOUT_GUARD
USER.SERVICE_CONNECTOR_TIMEOUT_GUARD
BINDING.CONNECTOR_TIMEOUT_GUARD
- Added the following Advanced Timer guard keys to PDS Settings section.
CHF_CONNECTOR_TIMEOUT_GUARD
UDR_CONNECTOR_TIMEOUT_GUARD
AM_CONNECTOR_TIMEOUT_GUARD
SM_CONNECTOR_TIMEOUT_GUARD
UE_CONNECTOR_TIMEOUT_GUARD
- Added the following Advanced Timer guard keys to PCF User Connector section.
CHF_CONNECTOR_TIMEOUT_GUARD
UDR_CONNECTOR_TIMEOUT_GUARD
PDS_CONNECTOR_TIMEOUT_GUARD
- Added the Advanced Timer guard key
BSF_CONNECTOR_TIMEOUT_GUARD
to Binding Service section. - Added
USER.ssv.excludeDnn.<Snssai>
to PCF Session Management. - Added
USER.ssv.excludeApns
to Settings. - Added/updated the description of the following dimensions in CNC Policy Metrics:
- sourceUri
- sourceOperationType
- uri
- priority
- responseCode
- responseCause
- duration