C Entering Upgrade Software Access Key

This procedure will validate the Upgrade Software Access Key against the upgrade target release.

The Upgrade Software Access Key is used for releases 45.x and 46.0. It is no longer used for release 46.1 and later.

Should THIS PROCEDURE FAIL, CONTACT My Oracle Support (MOS) AND ASK FOR UPGRADE ASSISTANCE.

1. If a USB drive is present, remove it.
   If server software delivery (SSD): no RMD should be inserted in drive slot.
2. For release 45.x through 46.0, issue the command to validate the Upgrade Software Access Key.[1]Skip this command for releases 46.1 and later.

   Note:

   If SAK unavailable, contact My Oracle Support (MOS).

   chg-upgrade-config:sak=XXXXXXXXXXXXX:src=fixed

   (Where XXXXXXXXXXXXX is the Software Access Key.)

   Response to command is displayed.

   Verify the correct Upgrade target release is in the output.

   eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
       chg-upgrade-config:key=XXXXXXXXXXXXX:src=zzzzz
       Command entered at terminal #6.
   ;
   
       eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
   
       Upgrade target: EAGLE XX.x.x.x.x-YY.y.y
   ;
   
       eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
       Command Completed.
   ;