1. EAGLE Software Upgrade Guide
  2. Preparations For Upgrade Execution

B Preparations For Upgrade Execution

Target Release Software Download

The following procedure is a reference for the commands that will download an EAGLE software release to the inactive partition group of the TDM from either a remote FTP server or from the thumb drive containing the upgrade target release for the E5-MASP.

The following items are required before the release can be downloaded to the EAGLE from a FTP server:

  • E5-IPSM or E5-ENET-B card running IPS application defined, configured, and IS-NR
  • DIST application FTP server provisioned

Download Target Software Release and Create USB Upgrade Media

This procedure downloads the target software release and creates the USB upgrade media using a Windows PC.

Should THIS PROCEDURE FAIL, CONTACT My Oracle Support AND ASK FOR UPGRADE ASSISTANCE.

  1. Using a PC running Windows 7 or later, download the target EAGLE Release from the Oracle Software Delivery Cloud (OSDC) to a local directory.
    • Go to http://edelivery.oracle.com
    • Sign In
    • Search for the target EAGLE software release
    • Accept the Oracle Standard Terms and Restrictions
    • Click on the link to the zip file for the target EAGLE software release
    • Save the zip file to a local directory, for example C:\Users\Admin\Desktop\uusb_media
    • Unzip the Vxxxxxx-01.zip file that was downloaded to the same local directory.
    • This will produce a <eagle target software release number>.exe file.
  2. Open a command window as Administrator: on Window 7 go to Start -> All Programs -> Accessories, right click on Command Prompt and select Run as Administrator; on Windows 8/10, go to Start, type cmd.exe in the search box, right click on Command Prompt and select Run as Administrator; then Change Directory to the path of the local directory.
    C:\Users\Admin>cd Desktop/uusb_media
C:\Users\Admin\Desktop\uusb_media>
  3. Extract the downloaded release in the local directory by entering the name of the .exe file as seen in step 1 and verify that the directory contains the following files: the target release file 46.xx.xx.xx.xx-6X.yy.yy.tar.gz, uusb.clf, mkdosfs.exe, pvu.exe, uusb.exe.
    C:\Users\Admin\Desktop\uusb_media><eagle target software release number>

7-Zip SFX 9.20  Copyright (c) 1999-2010 Igor Pavlov  2010-11-18

Processing archive: C:\Users\Admin\Desktop\uusb_media\46.3.0.0.0-68.12.0.e

Extracting  46.3.0.0.0-68.12.0.tar.gz
Extracting  uusb.clf
Extracting  mkdosfs.exe
Extracting  pvu.exe
Extracting  uusb.exe

Everything is Ok
  4. If the target release is 46.3.0.0.0 or later and you need to create USB Upgrade Media, continue with the next step; otherwise stop.
  5. Insert EAGLE USB media into a PC USB port.
  6. Goto Start -> Computer and wait for USB drive to be detected. Note its drive letter.
  7. Enter uusb command with the release filename and drive of the USB media, where 46.xx.xx.xx.xx-68.yy.yy.tar.gz is the name of the release file in the directory from step 3 and E: is the USB media drive letter from above step 6.
    C:\Users\Admin\Desktop\uusb_media>uusb.exe 46.xx.xx.xx.xx-68.yy.yy.tar.gz e:

Copyright (c) 1993, 2014, Oracle and/or its affiliates. All rights reserved.
Upgrade Media Creator Utility v1_1_0

2016:02:23 15:30:04 Checking whether Disk is present or not: ( e: )
2016:02:23 15:30:04 Disk is present in Drive: ( e: )
2016:02:23 15:30:04 Start Building .....
2016:02:23 15:30:04 Setting drive status: Busy
2016:02:23 15:30:04 Creating Partition ....
2016:02:23 15:30:04 Partitioning Drive:  \\.\PHYSICALDRIVE1 , REMOVABLE, USB
2016:02:23 15:30:04 Drive \\.\PHYSICALDRIVE1 . Prepared partitions

2016:02:23 15:30:04 Formatting Partitions:  e: , 32 , 1
mkdosfs.exe 2.11 (12 Mar 2005)
Win32 port by Jens-Uwe Mager <jum@anubis.han.de>
mkdosfs.exe: unable to lock \\.\e:
2016:02:23 15:30:04 Formatted drive e: UPGRADEUSB DISK

2016:02:23 15:30:04 Copying File  pvu.exe
2016:02:23 15:30:05 pvu.exe file successfully copied to Drive e:

2016:02:23 15:30:05 Copying File  uusb.clf
2016:02:23 15:30:05 uusb.clf file successfully copied to Drive e:

2016:02:23 15:30:05 Copying File  46.3.0.0.0-68.12.0.tar.gz
2016:02:23 15:30:16 46.3.0.0.0-68.12.0.tar.gz file successfully copied to Dr
e:

2016:02:23 15:30:16 Validating Disk........
2016:02:23 15:30:16 Validation Process Completed: e:

2016:02:23 15:30:16 Setting drive status: Ready
  8. Close the Command window and directory folder, properly eject the USB media and remove it from the PC. The USB media is now ready to use for EAGLE upgrade.

Download Target Release to Inactive Partition

This procedure downloads the target release to inactive partition of the TDMs.

Should THIS PROCEDURE FAIL, CONTACT My Oracle Support AND ASK FOR UPGRADE ASSISTANCE.

  1. Remove the thumb drives from the E5-MASPs.
    If downloading the upgrade target release from an FTP server, continue, otherwise go to step 3.
  2. Issue the command to display the status of the IPSM cards.
    rept-stat-card:appl=ips

    Response from the command is displayed.

    Verify there is an IPSM card running the IPSHC gpl and that the card is IS-NR. If no such card present in the system this procedure cannot be executed. 

       eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    CARD   VERSION      TYPE    GPL        PST            SST        AST
    1101    XXX-XXX-XXX IPSM    IPSHC      IS-NR          Active     -----
;
  3. Issue the command to display database status of both TDM partitions
    act-upgrade:action=dbstatus

    Response to the command is displayed.

    Record the card locations of the MASPs:

    Act MASP _____

    Stby MASP ____

    Verify if either of the inactive partitions has not been formatted. Mark below. Example shows that inactive partition of 1116 not formatted.

    If a database LEVEL, VERSION or STATUS is displayed the inactive partition has been formatted.

    Disk formatted.

    1114 ______

    1116 ______

    eaglestp YY-MM-DD hh:mm:ss EST PPP XX.x.x.x.x-YY.y.y Upg Phase x
    DATABASE STATUS: >> OK <<
            TDM 1114 ( STDBY)                 TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y      XXX YY-MM-DD hh:mm:ss TTTT Y      XXX YY-MM-DD hh:mm:ss TTTT
    FD CRNT Y      XXX YY-MM-DD hh:mm:ss TTTT Y      XXX YY-MM-DD hh:mm:ss TTTT
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP -    -         -        -         -    -         -        -
    USB BKP -    -         -        -         -    -         -        -

    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION      STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    OAM-RMV    1113  -  -      -           -        -          -
    TDM-CRNT   1114  Y  N  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    TDM-BKUP   1114  Y  -  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    OAM-RMV    1115  -  -      -           -        -          -
    OAM-USB    1115  -  -      -           -        -          -
    TDM-CRNT   1116  Y  N  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    TDM-BKUP   1116  Y  -  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL

    INACTIVE PARTITION GROUP
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION      STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    TDM-CRNT   1114  Y  -  ZZZ         YY-MM-DD hh:mm:ss  ZZZ-ZZZ-ZZZ  UPG 3
    TDM-BKUP   1114  Y  -  ZZZ         YY-MM-DD hh:mm:ss  ZZZ-ZZZ-ZZZ  UPG 3
    TDM-CRNT   1116  -  -      -           -        -          -
    TDM-BKUP   1116  -  -      -           -        -          -

;

    If either of the inactive partitions has not been formatted continue. If the target release is 46.2 or higher, continue. Otherwise go to Step 14.

  4. Issue the command to retrieve measurement setup.
    rtrv-meas-sched

    Response to retrieve command is displayed.

    Record if collection is on or off:

    ___________

    If COLLECT=ON, continue to next step. Otherwise, go to Step 6.

        eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    COLLECT        = off
    SYSTOT-STP     = (off)
    SYSTOT-TT      = (off)
    COMP-LNKSET    = (off)
    COMP-LINK      = (off)
    MTCD-STP       = (on)
    MTCD-LINK      = (on)
    MTCD-LNKSET    = (on)
;
  5. Issue the command to turn off measurement collection.

    Note:

    If executed, this step causes the database level to increment.

    chg-meas:collect=off

    Response to the change command is displayed.

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    CHG-MEAS: MASP A – COMPLTD
;
  6. Issue the command to display security log status.
    rept-stat-seculog

    Response to the command is displayed.

    If the ENTRIES column displays any value other than 0 for the Standby ROLE, proceed to the next step. Otherwise, go to step 10. 

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    rept-stat-seculog
    Command entered at terminal #10.
;
    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
                 -- SINCE LAST UPLOAD --  OLDEST   NEWEST   LAST
    LOC  ROLE    ENTRIES %FULL OFLO FAIL  RECORD   RECORD   UPLOAD
    1114 Active  19      1     No   No    99-01-01 99-01-01 00-00-00
                                          13:43:37 14:08:12 00:00:00
    1116 Standby 0       0     No   No    99-01-01 99-01-01 99-01-01 
                                          13:39:39 13:43:10 14:07:59
;
  7. Issue the command to copy the security log from the standby disk.
    copy-seculog:slog=stb:dfile=upg.appB

    Response to the copy security log command is displayed.

    If this command fails, proceed to next step. Otherwise, go to Step 10.

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Security log on TDM 111X copied to file upg.appB on TDM 111Y
;

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    0468.0177    SECULOG 111X          Security log exception cleared
;
  8. Issue the command to display the FTA directory.
    disp-fta-dir

    Response to the command is displayed.

    If there are any files that need to be saved, they need to be removed via a file transfer. 

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    File Transfer Area Directory of fixed disk 1114

    FILENAME                         LENGTH   LAST MODIFIED     LBA
    YYMMDDs.log                      2560256  99-01-03 10:18:44 388769
    YYMMDDa.log                      2560256  99-01-03 10:19:20 393770
    m60_lnp.csv                      0        99-01-03 13:10:38 398771
      3 File(s) 21093376 bytes free
;
  9. Issue the command to delete ALL files in the transfer area.
    dlt-fta:all=yes

    Response to the delete command is displayed.

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    dlt-fta:all=yes:loc=XXXX
    Command entered at terminal #10.
;
  10. Issue the command to format the inactive partition of the standby MASP.
    format-disk:prtngrp=inactive:type=fixed:force=yes:low=no

    Response from the format disk command is displayed.

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Format-disk of system fixed disk started.
    Extended processing required, please wait.

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Format-disk of system fixed disk complete.
;
  11. Issue the command to display database status of both TDM partitions.
    act-upgrade:action=dbstatus

    Response to the command is displayed.

    Verify the inactive partition of the standby has been formatted. And the active partition is valid.

    If a database LEVEL, VERSION or STATUS is displayed the inactive partition has been formatted.

    If the database LEVEL of the active partition of the active and standby are not the same stop the procedure and contact My Oracle Support [see My Oracle Support (MOS).] 

    eaglestp YY-MM-DD hh:mm:ss EST PPP XX.x.x.x.x-YY.y.y 
    DATABASE STATUS: >> OK <<
            TDM 1114 ( STDBY )                TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y      XXX YY-MM-DD hh:mm:ss TTTT Y      XXX YY-MM-DD hh:mm:ss TTTT
    FD CRNT Y      XXX YY-MM-DD hh:mm:ss TTTT Y      XXX YY-MM-DD hh:mm:ss TTTT
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP -    -         -        -         -    -         -        -
    USB BKP -    -         -        -         -    -         -        -

    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION      STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    OAM-RMV    1113  -  -      -           -        -          -
    TDM-CRNT   1114  Y  N  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    TDM-BKUP   1114  Y  -  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    OAM-RMV    1115  -  -      -           -        -          -
    OAM-USB    1115  -  -      -           -        -          -
    TDM-CRNT   1116  Y  N  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    TDM-BKUP   1116  Y  -  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL

    INACTIVE PARTITION GROUP
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION      STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    TDM-CRNT   1114  N  -  1           YY-MM-DD hh:mm:ss  ZZZ-ZZZ-ZZZ  NORMAL
    TDM-BKUP   1114  N  -  1           YY-MM-DD hh:mm:ss  ZZZ-ZZZ-ZZZ  NORMAL
    TDM-CRNT   1116  -  -   -              -        -          -             
    TDM-BKUP   1116  -  -   -              -        -          -             

;

    If the inactive partition of the active MASP has not been formatted continue, otherwise go to Step 30.

  12. Issue the command to boot the Active MASP recorded in Step 3.
    init-card:loc=XXXX

    (Where XXXX is the location of the active MASP record in a previous)

    Response to init card command is displayed.

        eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
*   0261.0013  * CARD 111X OAMHC       Card is isolated from the system
                 ASSY SN: xxxxxxxx
;

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    5001.0009    CARD 111X OAMHC       MASP became active
;
    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    5038.0014    CARD XXXX OAMHC       Card is present
                 ASSY SN: xxxxxxxx
;
  13. Issue the command to log back in to the system.
    login:uid=XXXXXX

    (Where XXXXXX is a valid login ID)

    Response to login command is displayed.

    Ignore any login failure message.

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y 
        User logged in on terminal 10.
;

? Login failures since last successful LOGIN
Last successful LOGIN was on port ? on ??-??-?? @ ??:??:??
  14. Repeat step 6 – 11.

    If downloading the upgrade target release from an FTP server, continue. Otherwise, insert upgrade media into drive slot and go to step 16.

    Once inserted, allow time for the upgrade media to be detected by the system.

    For E5-MASP systems, the USB drive is inserted in the flush mounted USB port on the active E5-MASP.

  15. Issue command to retrieve the FTP servers provisioned on the system.
    rtrv-ftp-serv

    Response to the command is displayed.

    Verify that a software distribution, DIST, application server has been provisioned.

    If the DIST has not been provisioned, contact My Oracle Support for assistance. 

         eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y

    APP       IPADDR           LOGIN            PRIO  PATH
    --------  ---------------  ---------------  ----  ----
    DIST      XXX.XX.X.XX      aaaaaa           Z     aaaaaaaaaaaaaaaaaaa

    No entries found
;
  16. Issue command to retrieve the EAGLE target release software.
    act-upgrade:action=getrel:release=”xx.xx.xx-yy.yy.yy.tar.gz” :src=server (downloading from the FTP server)

    or

    act-upgrade:action=getrel:release=”xx.xx.xx-yy.yy.yy.tar.gz” :src=usb(downloading from upgrade media)

    (Where xx.xx.xx-yy.yy.yy is the release-build number of the upgrade target load (ex. 45.0.1-64.70.36.tar.gz).

    Response to the command is displayed.

    Command execution time: approximately 20 – 30 minutes.

    If the software release has been downloaded from the USB drive, disconnect the drive from the E5-MASP.

        eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Download release from zzzzzzz 
;

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Validate database release xx.xx.xx-yy.yy.yy.tar
;

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Copy database release to inactive partition
;

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Eagle Release successfully downloaded
;

    eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    Command Complete : Upgrade action completed successfully
;
  17. Issue the command to display database status of both TDM partitions.
    act-upgrade:action=dbstatus

    Response to the command is displayed.

    Verify the inactive partitions of the active & standby have been downloaded with the target release by confirming that database VERSION is the target version. C (coherency), LEVEL, and STATUS will be displayed as shown. 

        eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y 
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                TDM 1116 ( STDBY )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y      XXX YY-MM-DD hh:mm:ss TTTT Y      XXX YY-MM-DD hh:mm:ss TTTT
    FD CRNT Y      XXX YY-MM-DD hh:mm:ss TTTT Y      XXX YY-MM-DD hh:mm:ss TTTT
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP -    -         -        -         -    -         -        -
    USB BKP -    -         -        -         -    -         -        -

    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION      STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    OAM-RMV    1113  -  -      -           -        -          -
    TDM-CRNT   1114  Y  N  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    TDM-BKUP   1114  Y  -  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    OAM-RMV    1115  -  -      -           -        -          -
    OAM-USB    1115  -  -      -           -        -          -
    TDM-CRNT   1116  Y  N  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL
    TDM-BKUP   1116  Y  -  XXX         YY-MM-DD hh:mm:ss  XXX-XXX-XXX  NORMAL

    INACTIVE PARTITION GROUP
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION      STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    TDM-CRNT   1114  Y  -  1           00-00-00 00:00:00  ZZZ-ZZZ-ZZZ  NORMAL
    TDM-BKUP   1114  Y  -  1           00-00-00 00:00:00  ZZZ-ZZZ-ZZZ  NORMAL
    TDM-CRNT   1116  Y  -  1           00-00-00 00:00:00  ZZZ-ZZZ-ZZZ  NORMAL
    TDM-BKUP   1116  Y  -  1           00-00-00 00:00:00  ZZZ-ZZZ-ZZZ  NORMAL

;
  18. If step 5 was executed, issue the command to turn the measurements collection on. Otherwise, go to the end of the procedure.
    chg-meas:collect=on

    Response to the change command is displayed.

        eaglestp YY-MM-DD hh:mm:ss TTTT PPP  XX.x.x.x.x-YY.y.y
    CHG-MEAS: MASP A – COMPLTD
;

Configuring Card-Set Network Conversion Method

This procedure provides the steps to configure the system to use the card-set method during the network conversion portion (Phase 3) of the upgrade.

Should THIS PROCEDURE FAIL, CONTACT My Oracle Support AND ASK FOR UPGRADE ASSISTANCE.

Note:

The system should be running the target release on MASPs of 46.0 or higher. This procedure should be run after Procedure 29, Step 40 in E54339 OR Before STP Conversion in this document.
  1. Issue the card status command to verify the target release GPL is running.
    rept-stat-gpl:gpl=oamhc

    Response from the status command is displayed.

    Verify that the version of OAMHC GPL running is 46.0 or later. 

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase 0
    GPL Auditing  ON
    
    APPL      CARD      RUNNING         APPROVED      TRIAL
    OAMHC     1113      XXX-XXX-XXX ALM YYY-YYY-YYY   -----------   
    OAMHC     1115      XXX-XXX-XXX ALM YYY-YYY-YYY   -----------
    Command Completed.
;
  2. Issue the command to retrieve the upgrade configuration.
    rtrv-upgrade-config

    Response to the retrieve command is displayed.

    If the Threshold Type has not already been changed to SET, it will be either GROUP or SYSTEM.

    If the SAK is not set, perform Entering Upgrade Software Access Key. 

        eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    Software Access Key entered on system : vbsevhcea7vy5

    Configured Upgrade Threshold Type: GROUP

    Command Completed.
;
  3. Issue the command to change the upgrade configuration
    chg-upgrade-config:threstype=set:srvsets=X:limsets=Y

    Note:

    Refer to Recommendations, recommendation # 5 for the values of X and Y.

    Response to the command is displayed.

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    chg-upgrade-config:threstype=set:srvsets=X:limsets=Y
    Command entered at terminal #tt.

    Command Completed.
;
  4. Issue the command to retrieve the upgrade configuration
    rtrv-upgrade-config

    Response to the retrieve command is displayed.

        eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    Software Access Key entered on system : vbsevhcea7vy5

    Configured Upgrade Threshold Type: SET
      Number of SERVICE Sets: X
      Number of LINK Sets: Y

    Command Completed.
;
  5. Issue the command to report the card status.
    rept-stat-card

    Response to the command is displayed.

        eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    CARD   VERSION      TYPE      GPL        PST            SST        AST
    1101   134-076-000  DCM       IPGHC      IS-NR          Active     -----
    1102   134-076-000  DCM       IPGHC      IS-NR          Active     -----
    1103   134-076-000  DCM       IPLHC      IS-NR          Active     -----
    1104   134-076-000  DCM       IPLHC      IS-NR          Active     -----
    1105   134-076-000  DSM       SCCPHC     IS-NR          Active     -----
    1107   134-076-000  MCPM      MCPHC      IS-NR          Active     -----
    1109   134-069-000  HIPR2     HIPR2      IS-NR          Active     -----
    1110   134-069-000  HIPR2     HIPR2      IS-NR          Active     -----
    1111   134-076-000  IPSM      IPSHC      IS-NR          Active     -----
    1112   134-076-000  TSM       GLSHC      IS-NR          Active     -----
    1113   134-076-000  E5MCAP    OAMHC      IS-NR          Standby    -----
    1114   -----------  E5TDM                IS-NR          Active     -----
    1115   134-076-000  E5MCAP    OAMHC      IS-NR          Active     -----
    1116   -----------  E5TDM                IS-NR          Active     -----
    1117   -----------  E5MDAL               IS-NR          Active     -----
    1201   134-076-000  LIMT1     SS7HC      IS-NR          Active     -----
    1205   134-076-000  DSM       SCCPHC     IS-NR          Active     -----
    1207   134-076-000  TSM       GLSHC      IS-NR          Active     -----
    1209   134-069-000  HIPR2     HIPR2      IS-NR          Active     -----
    1210   134-069-000  HIPR2     HIPR2      IS-NR          Active     -----
    1211   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1212   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1213   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1214   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1215   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1216   134-076-000  DCM       IPLHC      IS-NR          Active     -----
    1217   134-076-000  DSM       SCCPHC     IS-NR          Active     -----
    1301   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1302   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1303   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1304   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1305   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1306   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1307   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1308   134-076-000  LIMDS0    SS7ML      IS-NR          Active     -----
    1309   134-069-000  HIPR2     HIPR2      IS-NR          Active     -----
    1310   134-069-000  HIPR2     HIPR2      IS-NR          Active     -----
    1311   134-076-000  MCPM      MCPHC      IS-NR          Active     -----
    1315   134-076-000  IPSM      IPSHC      IS-NR          Active     -----
    1316   134-076-000  IPSM      IPSHC      IS-NR          Active     -----
    1317   134-076-000  DSM       SCCPHC     IS-NR          Active     -----

    Command Completed.
;
  6. Issue the upgrade activation command to create card sets.
    act-upgrade:action=createsets

    Response to the command is displayed.

    Note:

    The Create Set command assigns cards to sets using an optimal distribution, which assumes that the system is stable. If the system’s configuration is such that the distribution of the cards is not desirable, contact My Oracle Support for assistance when uncertain on how to alter the sets of cards. Otherwise, continue to next step if a change to the assignment of cards is necessary. 
        eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    ACT-UPGRADE: Creating card set list...

    Card set list created.
;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =     MUX, Set =  1
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1209       HIPR2     N/A       N/A
    1309       HIPR2     N/A       N/A
    1109       HIPR2     N/A       N/A
    ------------------------------------
      MUX= 50%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =     MUX, Set =  2
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1210       HIPR2     N/A       N/A
    1310       HIPR2     N/A       N/A
    1110       HIPR2     N/A       N/A
    ------------------------------------
      MUX= 50%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group = SERVICE, Set =  1
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1205      SCCP     N/A      1700*
    1207       GLS     N/A         0
    1315       IPS     N/A         0
    1311       MCP     N/A         0
    1105      SCCP     N/A      1700*
    1111       IPS     N/A         0
    ------------------------------------
      GLS= 50%
      IPS= 66%
      MCP= 50%
     SCCP= 50%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group = SERVICE, Set =  2
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1217      SCCP     N/A      1700*
    1316       IPS     N/A         0
    1317      SCCP     N/A      1700*
    1107       MCP     N/A         0
    1112       GLS     N/A         0
    ------------------------------------
      GLS= 50%
      IPS= 33%
      MCP= 50%
     SCCP= 50%

;
    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =    LINK, Set =  1
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1201       SS7       8       N/A
    1213       SS7       2       N/A
    1215       SS7       1       N/A
    1216     IPLIM       8*      N/A
    1302       SS7       1       N/A
    1304       SS7       1       N/A
    1306       SS7       1       N/A
    1308       SS7       1       N/A
    1101     IPGWY       1*      N/A
    ------------------------------------
      ATM=  0%
    IPGWY= 50%
    IPLIM=100%
      SS7= 52%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =    LINK, Set =  2
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1211       SS7       4       N/A
    1212       SS7       5       N/A
    1214       SS7       1       N/A
    1301       SS7       1       N/A
    1303       SS7       1       N/A
    1305       SS7       1       N/A
    1307       SS7       1       N/A
    1102     IPGWY       1*      N/A
    1103     IPLIM       0       N/A
    1104     IPLIM       0       N/A
    ------------------------------------
      ATM=  0%
    IPGWY= 50%
    IPLIM=  0%
      SS7= 48%

;
    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    xxxx is unassigned.
    End of Card List display.
;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Command Complete : Upgrade action completed successfully
;
  7. If cards need to be moved to a different set, issue the command to change the upgrade configuration.

    Note:

    If card is unassigned, it can also be add to a set with this command. Unassigned cards are usually cards that were not IS-NR when the card sets were created.
    chg-upgrade-config:loc=XXXX:assignset=NN

    (Where XXXX is the card to be moved and NN is the set it should move to.)

    Response to the command is displayed.

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    chg-upgrade-config:loc=XXXX:assignset=NN
    Command entered at terminal #tt.

    Command Completed.
;
  8. Issue the one of the following commands to retrieve the card-set configuration
    act-upgrade:action=displaysets
rtrv-upgrade-config:display=sets
rtrv-upgrade-config:display=limsets
rtrv-upgrade-config:display=srvsets

    Response to the retrieve command is displayed.

        eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =     MUX, Set =  1
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1209       HIPR2     N/A       N/A
    1309       HIPR2     N/A       N/A
    1109       HIPR2     N/A       N/A
    ------------------------------------
      MUX= 50%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =     MUX, Set =  2
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1210       HIPR2     N/A       N/A
    1310       HIPR2     N/A       N/A
    1110       HIPR2     N/A       N/A
    ------------------------------------
      MUX= 50%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group = SERVICE, Set =  1
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1205      SCCP     N/A      1700*
    1207       GLS     N/A         0
    1315       IPS     N/A         0
    1311       MCP     N/A         0
    1105      SCCP     N/A      1700*
    1111       IPS     N/A         0
    ------------------------------------
      GLS= 50%
      IPS= 66%
      MCP= 50%
     SCCP= 50%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group = SERVICE, Set =  2
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1217      SCCP     N/A      1700*
    1316       IPS     N/A         0
    1317      SCCP     N/A      1700*
    1107       MCP     N/A         0
    1112       GLS     N/A         0
    ------------------------------------
      GLS= 50%
      IPS= 33%
      MCP= 50%
     SCCP= 50%

;
    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =    LINK, Set =  1
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1201       SS7       8       N/A
    1213       SS7       2       N/A
    1215       SS7       1       N/A
    1216     IPLIM       8*      N/A
    1302       SS7       1       N/A
    1304       SS7       1       N/A
    1306       SS7       1       N/A
    1308       SS7       1       N/A
    1101     IPGWY       1*      N/A
    ------------------------------------
      ATM=  0%
    IPGWY= 50%
    IPLIM=100%
      SS7= 52%

;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Card List: Group =    LINK, Set =  2
    ====================================
    CARD      APPL   LINKS       TPS
    ------------------------------------
    1211       SS7       4       N/A
    1212       SS7       5       N/A
    1214       SS7       1       N/A
    1301       SS7       1       N/A
    1303       SS7       1       N/A
    1305       SS7       1       N/A
    1307       SS7       1       N/A
    1102     IPGWY       1*      N/A
    1103     IPLIM       0       N/A
    1104     IPLIM       0       N/A
    ------------------------------------
      ATM=  0%
    IPGWY= 50%
    IPLIM=  0%
      SS7= 48%

;
    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x
    xxxx is unassigned.
    End of Card List display.
;

    eaglestp YY-MM-DD hh:mm:ss TTTT EAGLE XX.x.x-YY.yy.y Upg Phase x

    Command Complete : Upgrade action completed successfully
;
  9. Repeat steps 7 – 8 as cards need to be moved.