F Upgrading Source Release 46.5.1.10.0 to Target Release 46.5.1.20.0 (46.9.1.20.0)

This procedure upgrades the EAGLE Software Release 46.5.1.10.0 to the Release 46.5.1.20.0 (46.9.1.20.0).

The only EPM-A cards that are allowed to be operational in the EAGLE prior to upgrading to the Release 46.5.1.20.0 are the E5-ENET-A cards running the IPSG application. In addition, other A cards, that is, the cards that contain the BLIXP flash GPL must be removed from the machine prior to the upgrade.

Release 46.9.1.20.0 is used to perform chg-gpl only. The release should not be used for a fresh installation.

1. Disable the security feature.

   Note:

   To turn off both SSH and SFTP, refer to EAGLE’s Database Administration – System Management User’s Guide, Section A.4.
2. Migrate IPSM, MCPM, and OAM to the VxWorks 6.9 GPL versions.
3. Upgrade to EAGLE 46.5.1.20.0 by referring to EAGLE Software Upgrade Guide for 46.x.
4. Re-enable the security feature.

   Note:

   Refer to EAGLE’s Database Administration – System Management User’s Guide, Section A.4.
5. Migrate the E5-ENET-A cards to the SLIC cards.
   1. Flash SLIC (to be used in 4-Port IPSG locations) to BLSL932.
   2. Consolidate two E5-ENET-A cards into one SLIC card.
6. At this point, all of the E5-ENET-A cards have been removed from the EAGLE node.
7. Prepare a USB with the 46.9.1.20.0 upgrade GPLs to run the chg-gpl command.
8. Run the chg-gpl:gpl=oamhc69:ver-147.5.11 command.
9. Run the init-card:appl=oam command.
   The OAM displays the release label 46.9.1.20.0-77.5.11.
10. At this point, the EAGLE node is running Release 46.9.1.20.0. The only supported upgrade path from 46.9.1.20.0 will be to Release 47.0.0.0.0.