7.2 Resolved Bug List
The tables in this section list bugs resolved in the following builds:
- EAGLE 47.0.0.3.0-79.13.23
- EAGLE 47.0.0.2.0-79.13.21
- EAGLE 47.0.0.1.0-79.13.19
- EAGLE 47.0.0.0.0-79.13.0
The resolved bug table shows an impact statement for the severity 1 and 2 bugs as well as severity 3 bugs associated with an SR.
Note:
Resolved bugs are sorted in ascending order by severity and then by bug number.Table 7-1 EAGLE Release 47.0.0.3.0-79.13.23 Resolved Bugs (August 2024)
| Bug Number | SR | Severity | Title | Customer Impact |
|---|---|---|---|---|
| 36728711 | Y | 2 | ACTIVE Partition of MASP becomes inaccessible after re-initializing MASP card | If this issue occurs, the Eagle database on the E5-MASP card will become inconsistent, report DMS errors for reading/ writing Eagle database tables, and fail to connect to the IMT buses when the card is booted. |
| 36790424 | N | 3 | Flash is failing via Recovery console from R47.1 to R48 | |
| 36790547 | N | 3 | Not able to flash OAM from Eagle Recovery console | |
| 36794346 | N | 3 | Update format/copy-disk code to create equal partitions of 2GB same as media builder | |
| 36753891 | N | 4 | Need to upgrade open source item LZMA to latest version 24.07 | |
| 36757265 | N | 4 | Uplift ZLIB version to 1.3.1 | |
| 36779147 | N | 4 | Uplift cJSON version to 1.7.18 |
Table 7-2 EAGLE Release 47.0.0.2.0-79.13.21 Resolved Bugs (November 2023)
| Bug Number | SR | Severity | Title | Customer Impact |
|---|---|---|---|---|
| 35869028 | N | 3 | Update init-flash command to flash multiple cards with BLMCAP flash | |
| 35869544 | N | 3 | R47_MR: IP Routes for port C associations are getting lost after re-initializing the card | |
| 35912720 | N | 3 | R47_MR: Links & associations remain UP & Established respectively when network based static IP route is deleted | |
| 35913809 | N | 3 | R47_MR:Fastcopy links status displayed as OFFLINE | E5IS as inactive |
Table 7-3 EAGLE Release 47.0.0.1.0-79.13.19 Resolved Bugs (July 2023)
| Bug Number | SR | Severity | Title | Customer Impact |
|---|---|---|---|---|
| 33276643 | Y | 3 | R47.0_ST: observing discards for mtp3 service in rept-stat-mfc on setup e1181001 | This is a rare issue. Traffic drop will be observed on the card when
this issue is hit. The below command can be used to identify which card
is discarding the traffic.
Workaround: Re-initialize the card to come out of stuck MFC/ICMM state. |
| 35146581 | Y | 3 | Raise an alarm when there is MTP3 PDU discards occurring in the STP | Currently there is no UAM to report when a LIM card is in MFC PDU
discard. Hence, the customer would not know about a traffic impacting
situation.
The bug request is to raise an alarm when this condition exists so the customer will be aware of the traffic impact and react to the situation. |
| 35179036 | Y | 3 | FTRA incorrect output for RTRV-GTA csv data | With one less delimiter, if OPCODE tag is missing, the customer engineering system will not correctly parse the csv file. |
| 35179049 | Y | 3 | Traceroute takes path via DEFROUTER even if IP-RTE entries are defined | None as workaround is to test connectivity to remote IP address using the PING command. |
| 35184831 | Y | 3 | Boot loader update fails for EPM-B cards during upgrade phase 3 | Cards must be flashed manually which can cause system upgrade
maintenance window to be extended past the allowed
time.
Workaround: Flash each card manually. |
| 35206695 | Y | 3 | Raise an alarm for hung card in the system | If no alarm is generated by the system, the customer will not know that a card is in a hung state and not processing the traffic. |
| 35230920 | Y | 3 | BIP DATA INVALID error seen on some cards and chg-bip-rec doesnt work on some cards | The customer will respond and investigate a fault BIP alarm raised by the system. There will not be any operational impact to traffic or card operations. |
| 35010532 | Y | 4 | False Alarm raised on primary SCCP card Port B with EPAP connectivity | |
| 35178917 | Y | 4 | Decoding generic name from PIP when generic name tag(0xC7) is not present | |
| 35203309 | N | 4 | ZLIB UPDATE TO AT LEAST 1.2.13 |
Table 7-4 EAGLE Release 47.0.0.0.0-79.13.0 Resolved Bugs (September 2022)
| Bug Number | SR | Severity | Title | Customer Impact |
|---|---|---|---|---|
| 32169138 | N | 2 | R46.5.1.20_4PORT: few m3ua associations are not getting established on 4 port IPSG card | No traffic impact. Workaround: Do not use same combination of LPORT, RPORT and RHOST values when configuring associations on a 4 port IPSG card. |
| 32662525 | N | 2 | R47.0_LNP_FT: ELAP cards are getting stuck at phase 1 loading (98%) | ELAP cards won't load and won't come active. It will affect the traffic. |
| 32820169 | N | 2 | ACN Length Check to be removed for TOBR Processing | After upgrade to R46.9.1, packet failure was observed due to this check. While investigating it was found that the 7 bytes length may be true for MAP messages but not true for CAP/INAP/CS1+ or other protocols. ACNs are represented by TLV encoding and can have variable length. |
| 32965547 | Y | 2 | SR: PCT and TIF interaction causes incorrect OPC in release message | TIF as a gateway screening action will generally occur first unless a system is using PCT. The order of operations caused a Release message to be sent with the incorrect OPC value which can lead to a trunk reset/outage. |
| 33191698 | Y | 2 | Customer uses the IP route table to define their subnet mask on their association destinations in a network range using a subnet mask of 255.255.255.224 | Static IP routes in IP route table will load with incorrect subnet mask on applications, which may cause the SCTP association to fail to be established. |
| 34069874 | Y | 2 | E5-ENET-B cards flashed with VxWorks6.9 BLDC32 / SS7HC69 with APPL SS7ANSI / E1T1 become unresponsive | This will cause traffic loss on the unresponsive card until the card is re-seated. |
| 31582751 | Y | 3 | R46.9_ST: MOFSM MAP V2 message is not processing MBR. | MO-FSM fails MBR processing in these two cases: 1. For MAP version 1 & 2, the IMSI should not be decoded, but MBR is discarding the message with UIM 1145 with error cause as "IMSI decoding failed" even when the IMSI set is not applied. The correct behavior is that MBR should not decode the IMSI. 2. For MAP version 3, IMSI is an optional parameter. Again, MBR is discarding the message with UIM 1145 with error cause as "IMSI decoding failed" if no IMSI is present in the message or even when the IMSI is present but could not be decoded and the IMSI set is not applied. |
| 32185846 | N | 3 | R46.5.1.20_4PORT: Standby OAM goes to DB-DIFF state after Duplex mode is Established | |
| 32405587 | N | 3 | R46.9.1_ST: ATI-ACK and PSI-ACK getting decoded even if integer tag after result tag is missing | |
| 32593813 | Y | 3 | Extra comma "," listed in Daily LNP and SSP CSV Measurements files. | Customer unable to retrieve proper measurements reports. |
| 32605042 | Y | 3 | SR 3-25047436511: OCEEMS 46.6.4 - problems with script-/schedule running. | Scheduled Management Scripts at E5-MS may take a long time to execute a list of Eagle commands. Workaround: Reduce the eagleidleTimeoutinMins timer to 5 minutes. |
| 32616926 | N | 3 | Rel.46.9.1_ST : Obit "Module mcc_queue.c Line 1207" observed while inh/alw IMT bus. | |
| 32697503 | Y | 3 | SR: act-upgrade:action=createsets triggers infinite loop displaying MUX sets. | When using the chg-upgrade-config:threstype=set:srvsets=2:limsets=4 command followed by act-upgrade:action=createsets, the command goes into a loop on the MUX cards and the active MASP has to be pulled to stop the loop. |
| 32919608 | Y | 3 | SR: ENT-SUBNETID: MASP B - Stdby database update completion status unknown | When a user configures subnet ID table using ENT-SUBNETID command, the update is successful in the Active MASP but the standby MASP update fails. As a result, Standby MASP current DB reports DIFF LEVEL and DATABASE STATUS becomes NOT OK. No new configuration can be made until DATABASE STATUS is made OK. |
| 32957996 | N | 3 | CSV file for gttact is missing a value on all but the first record of output | |
| 33113251 | Y | 3 | SR: EAGLE TOBR-ITU TCAP Component not decoded correctly when "Component Portion Length" is coded in Indefinite form. | When TOBR processes messages received with TCAP "Component Portion Length" coded in Indefinite form and if there is any other MSU information encoded after TCAP component, it will assume there is one more component and will decode the Opcode as NONE causing incorrect GTT routing. |
| 33118768 | Y | 3 | SR: EAGLE SCTP sends SCTP Restart Notification to local m3ua when a INIT is received on a established link which is an incorrect behaviour | When an INIT Chunk is received on an In-Service M3UA link, local SCTP reports RESTART notification to the M3UA layer. As a result, the local M3UA changes ASP status to ASP DOWN. Therefore the M3UA link at the EAGLE will be down whereas the link status at the peer remains UP. This results in the peer M3UA to continue sending traffic but the traffic will not be processed at the EAGLE. |
| 33163786 | N | 3 | Rel.47.0:False EROUTE System Capacity Exceeded alarm getting generated due to incorrect TPS display | |
| 33957700 | Y | 3 | SIP: Single digit DEFCC and Prefix lookup fails | Will not be able to determine if SIP number is ported if customer has Prefix set to 1 (NA SIP customers). |
| 34143896 | Y | 3 | Upgraded STP from 46.7.4 to 46.9.4, GTT IPSG cards GTT DB level are incorrect | System will report incorrect GTT DB levels until one of workarounds
are implemented. No impact to traffic and condition is only seen during
software upgrade. Workarounds:
|
| 34226132 | N | 3 | ServingNodeIndication not going in ATI request in PS domain(SFAPP Feature) | |
| 34350455 | N | 3 | R47.0_ST:SIP card boots with obit "restart.c" when phone context in SIP-NPP table is present without PFX value | |
| 29549597 | N | 4 | R46.8_FT:Incorrect Eagle version is shown in CSV files of UNIX and LINUX FTRA | |
| 31646496 | N | 4 | R46.9_ST: SFAPP traffic is being shown twice in rept-stat-sfapp if psi-ack\ati-ack is timed out. | |
| 31790069 | N | 4 | EAGLE Changes for LNP greater than 504M. | |
| 31882102 | N | 4 | Adding New TBGTTLS options | |
| 31918026 | N | 4 | TBGTTLS (using ENHMTP Key) not working as expected | |
| 32227541 | N | 4 | R46.7.6_ST_FTRA:Incorrect "MAXENTRIES" reported in SS-APPL CSVs | |
| 32619150 | N | 4 | Extend Eagle User Password Length up to 20 characters. | |
| 32656652 | Y | 4 | SR: BIP errors on cards not Alarming UAM 102 in Eagle | There is no operational impact to the customer. |
| 32685765 | N | 4 | Rel.46.9.1_ST:Dontcare is displayed instead of ipsg932 in UIM 1474. | |
| 32700814 | N | 4 | Removing BLSLC32, IPSG and IPSG32 GPLs. | |
| 32944947 | N | 4 | IMSI MAP Based Routing for IMEI_Check Messages | |
| 33129601 | N | 4 | Add procedure to activate LNP licensing beyond 504M with increment of 12M entries per part number. | |
| 33149073 | Y | 4 | OCEEMS doesn't clear FUSE PANEL alarms when it is cleared from EAGLE side | No impact to traffic or loss of service. |
| 33372705 | N | 4 | IN IDPR Consolidation | |
| 33447475 | Y | 4 | Add debug logs for MFC MTP3 Bug 33276643 | Will not be able to collect debug logs if condition occurs before card reboot. |
| 33507071 | N | 4 | TOBR enhancement to perform "Operation Code Tag " based routing | |
| 33517253 | N | 4 | Send Severity1 Alarms from EAGLE to PIC | |
| 33521991 | N | 4 | ENUM requirements for TIF enhancements | |
| 33669061 | N | 4 | TIFGNBL enhancement for decoding PIP when generic name is not present | |
| 33804710 | N | 4 | ENUM card booting with pvdlvmsg.c on converting from 32bit to 64bit | |
| 33845093 | N | 4 | Support for Port 53 for ENUM | |
| 33868436 | N | 4 | Invalid_TCAPClassTag | |
| 34036760 | N | 4 | Add debug logs for card stuck issue observed on Vxworks6.9 on multiple GPLs | |
| 34071816 | N | 4 | Support the 'notpresent' option for the opcodetag parameter in chg-sccp-msg command | |
| 34097667 | N | 4 | Increase SLIC SCCP throughput to 13.6K TPS with EPAP240M and EGMS features enabled. | |
| 34098651 | Y | 4 | Add missing parameters in debug variable for TBGTTLS Key generation. | No impact to customer traffic. |
| 34374574 | N | 4 | Update EEDB to use TPD 7.8.3.0.0_89.21.0 | |
| 34467088 | N | 4 | Uplift cJSON version to 1_7_15 |