4.34 chg-ainpopts

Use this command to provision AINPQ-specific data. This command updates the AINPOPTS table.

Parameters

Note:

The nature of address indicator parameters (rnaiv or rnai) and numbering plan parameters (rnp or rnpv) can be specified using a mnemonic or an explicit value. The mnemonic and explicit values cannot be specified at the same time for the same parameter.
defrn (optional)
Default routing number. This parameter specifies a default routing number that is used for own-network subscribers.
Range:
1 - 15 digits, none
Default:
No change to the current value
System Default:
none
dialnai (optional)
Digits dialed nature of address indicator.
Range:
0
National
1
International
Default:
No change to the current value
System Default:
0
dialpfx (optional)
Dialed party number prefix.
Range:
1-15 digits

Valid digits are 0-9, A-F, a-f

Default:
No change to the current value
System Default:
none
dltpfx (optional)
Delete prefix. This parameter specifies whether to delete the DIALPFX.
Range:
yes
no
Default:
No change to the current value
System Default:
no
lnpentpref (optional)
LNP entity preference is the first preference for the RTDB data / entity associated with a DN to be used as LRN.

Note:

The option is applied only if SPORT is not applied and EPAP lookup results in more than one entity.
Range
rn
Use RN as LRN as the first preference.
grn
Send GRN as LRN as the first preference.
asd
Send ASD as the first preference.
Default:
No change to the current value
System Default
rn
lnpnatldiglen (optional)
LNP national digit length.
Range
1-15
Default:
No change to the current value
System Default
10
lnpogdnnai (optional)
LNP outgoing DN nature of address indicator. This parameter overrides the outgoing Nature of Number if DN is being returned.
Range:
inc
Use the incoming NoN
sub
Subscriber
natl
National Significant
intl
International
diglen
If the outgoing digit length is less than or equal to LNPSUBDIGLEN then set NoN = SUBSCRIBER.

If the outgoing digit length is greater than LNPSUBDIGLEN and is less than or equal to LNPNATLDIGLEN then set NoN = NATIONAL Significant.

Default:
No change to the current value
System Default:
inc
lnpoglrnnai (optional)
LNP outgoing LRN nature of address indicator. This parameter overrides the outgoing Nature of Number if LRN is being returned.
Range:
inc
Use the incoming NoN
sub
Subscriber
natl
National Significant
intl
International
diglen
If LRN digit length is less than or equal to LNPNATLDIGLEN then set NoN = NATIONAL SIGNIFICANT.

If LRN digit length is greater than or equal to LNPNATLDIGLEN then set NoN = INTERNATIONAL.

Default:
No change to the current value
System Default:
inc
lnpsnai (optional)
LNP service nature of address indicator. This parameter overrides the incoming Nature of Number in AIN Info_Analyzed CalledPartID.
Range:
inc
Use the incoming NoN
sub
Subscriber
natl
National Significant
intl
International
diglen
If the incoming NoN of AIN Info_Analyzed CalledPartyID is SUBSCRIBER, then do the following, else use the incoming NoN:

If digit length of CalledPartyID = LNPSUBDIGLEN, assume the NoN is Subscriber.

If digit length of CalledPartyID = LNPNATLDIGLEN, assume the NoN is NATIONAL (SIGNIFICANT).

If digit length of CalledPartyID is not equal to LNPNATLDIGLEN or LNPSUBDIGLEN, raise an error.

Default:
No change to the current value
System Default:
inc
lnpsport (optional)
LNP service portability.
Range
gsm
Apply Service Portability prefix for own-network GSM subscribers.
is41
Apply Service Portability prefix for own-network IS41 subscribers.
all
Apply Service Portability prefix for all own-network (IS41 and GSM) subscribers.
none
Service Portability is not performed for the feature.
Default:
No change to the current value
System Default
None
lnpsubdiglen (optional)
LNP subscriber digit length.
Range
1-15
System Default
7
ndialpfx (optional)
New dialed party number prefix.
Range:
1-15 digits, none

Valid digits are 0-9, a-f, A-F

System Default:
none
nec (optional)
National Escape Code.
Range:
1-15 digits, none

Valid digits are 0-9, A-F, a-f

Default:
No change to the current value
System Default:
none
rfmt (optional)
Routing address format. This parameter specifies the routing address format that is suported in the AINPQ "Return Result" response messages.
Range:
asdrn
ASD + RN
asdrndn
ASD + RN + [DIALPFX] + DN
asdrnnecdn
ASD + RN + [DIALPFX] + NEC + DN
asdrnccdn
ASD + RN + [DIALPFX] + CC + DN
ccasdrndn
[DIALPFX] + CC + ASD + RN + DN
ccgrndn
[DIALPFX] + CC + GRN + DN
ccrngrndn
[DIALPFX] + CC + RN + GRN + DN
ccgrnrndn
[DIALPFX] + CC + GRN + RN + DN
ccrndn
[DIALPFX] + CC + RN + DN
ccrnasddn
[DIALPFX] + CC + RN + ASD + DN
homerndn
Home Routing Number
grn
GRN
grndn
GRN + [DIALPFX] + DN
grnrndn
GRN + RN + [DIALPFX] + DN
grnrn
GRN + RN
grnrnccdn
GRN + RN + [DIALPFX] + CC + DN
grnrnnecdn
GRN + RN + [DIALPFX] + NEC + DN
rn
Routing Number
rnasd
RN + ASD
rnasddn
RN + ASD + [DIALPFX] + DN
rnasdccdn
RN + ASD + [DIALPFX] + CC + DN
rnasdnecdn
RN + ASD + [DIALPFX] + NEC + DN
rndn
RN + [DIALPFX] + DN
rngrn
RN + GRN
rngrndn
RN + GRN + [DIALPFX] + DN
rngrnccdn
RN + GRN + [DIALPFX] + CC + DN
rngrnnecdn
RN + GRN + [DIALPFX] + NEC + DN
rnnecdn
RN + [DIALPFX] + NEC + DN
Default:
No change to the current value
System Default:
rndn
rnai (optional)
Routing nature of address indicator
Range:
frmsg
NAI from the incoming message
intl
International number
natl
National significant number
Default:
No change to the current value
System Default:
frmsg
rnaiv (optional)
Routing nature of address indicator value
Range:
0
National
1
International
Default:
No change to the current value
System Default:
none
rnp (optional)
Routing numbering plan
Range:
e164
IS41 Telephony Number
e212
IS41 Land Mobile Number
priv
IS41 Private Number
unknown
IS41 Numbering Plan Unknown
Default:
No change to the current value
System Default:
e164
rnpv (optional)
Routing numbering plan value
Range:
0 - 15
Default:
No change to the current value
System Default:
2
snai (optional)
Service Nature of Address indicator.
Range:
sub
Subscriber Number
intl
International Number
natl
National Significant Number
none
NAI value none
unknown
Unknown NAI value
Default:
No change to the current value
System Default:
none
sporttype (optional)
Service Portability type. This parameter specifies whether Service Portability is performed for the associated feature.

Note:

If Service Portability is performed, then the Service Portability prefix (RTDB ‘GRN’entity id ) is applied.

The S-Port feature must be enabled before this parameter can be specified. The S-Port feature must be turned on before any change to the parameter will impact the associated feature.

Range:
all
apply Service Portability prefix for all own-network (IS41 and GSM) subscribers
gsm
apply Service Portability prefix for own-network GSM subscribers
is41
apply Service Portability prefix for own-network IS41 subscribers
none
Service Portability is not performed for the feature.
Default:
No change to the current value
System Default:
none
sprestype (optional)
SP response type. The type of message sent by the system if an NPREQ message is received, the DN digits match, and the HLR ID is present.
Range:
rrwdgts
The system sends a "Return Results with Digits" message.
rrwodgts
The system sends a "Return Results without Digits" message.
Default:
No change to the current value
System Default:
rrwodgts

Example

chg-ainpopts:rfmt=rn:rnp=e164:rnai=intl:dialpfx=fac:dltpfx=yes

chg-ainpopts:rfmt=rndn:rnp=e212:rnai=intl:dialpfx=fac:dltpfx=no :dialnai=1:snai=natl

chg-ainpopts:rfmt=rngrnccdn:rnp=e164:rnai=intl:dialpfx=fac:dltpfx=yes

chg-ainpopts:sprestype=rrwdgts:rfmt=rnnecdn:nec=abcd1

chg-ainpopts:rfmt=rnnecdn:nec=abcd1

chg-ainpopts:rfmt=rnnecdn:nec=0

chg-ainpopts:rfmt=asdrnccdn:rnp=e164:rnai=intl:dialpfx=fac:dltpfx=yes

chg-ainpopts:rfmt=rn:rnp=e164:lnpsnai=sub:lnpnatldiglen=10:lnpentpref=rn

Dependencies

At least one optional parameter must be specified.

The rnp and rnpv parameters cannot be specified together in the command.

The rnai and rnaiv parameters cannot be specified together in the command.

If the ndialpfx or dltpfx parameter is specified, then the dialpfx parameter must be specified.

The dialpfx=none parameter cannot be specified.

If the ndialpfx=none parameter is specified, then the dltpfx parameter cannot be specified.

If the ndialpfx and dialpfx parameters are specified, then the value specified for the dialpfx parameter must already exist in the AINPOPTS table.

The value specified for the ndialpfx parameter cannot already exist in the AINPOPTS table.

A maximum of 2 Dialed Party Number Nature of Address values are allowed.

The dialnai and snai parameters must be specified together in the command.

If the snai=none parameter is specified, then the value specified for the dialnai parameter must already exist in the AINPOPTS table.

The National Escape Code ( nec parameter) can contain between 1 and 5 digits. Otherwise the value is none.

A maximum of 40 Dialed Party Number Prefix values can be provisioned.

If the nec=none parameter is specified, then values of asdrnnecdn, rnasdnecdn, rnnecdn, rngrnnecdn, and grnrnnecdn cannot be specified for the rfmt parameter.

The S-Port feature must be enabled before the sporttype or lnpsport parameter can be specified.

The AINPQ feature must be enabled before this command can be entered.

The LNPSUBDIGLEN value should be less than value of LNPNATLDIGLEN.

Output

chg-ainpopts:rfmt=rnasd:nec=0

    tekelecstp 09-06-03 15:15:44 EST  EAGLE 41.1.0
    CHG-AINPOPTS: MASP A - COMPLTD 
;